In cooling tower, water is cooled by the process of: – McqOptions

MCQOPTIONS

1.	In cooling tower, water is cooled by the process of:
A.	Condensation
B.	Fusion
C.	Evaporation
D.	Sublimation
Answer» D. Sublimation

Discussion

No Comment Found

Related MCQs

Condenser is not used in
If the thermal efficiencies of mercury and steam cycles are respectively η1 and η2 , then the overall efficiency of a binary cycle can be expressed as:
In which of the following pairs of cycles, both cycles have at least one isothermal process?
Ideal air standard efficiency of a closed cycle gas turbine depends on
In cooling tower, water is cooled by the process of:
A fluidized bed combustion system having an output of 35 MW at 80% efficiency when using a coal of heating value 26 MJ/kg with a sulphur content of 3.6% requires a particular limestone to be fed to it at a calcium-sulphur molar ratio of 3.0 so as to limit emissions of SO2 adequately. The limestone used contains 85% CaCO3. The required flow rate of limestone will be
If η1 and η2 are the thermal efficiencies of two individual power plants. When they are coupled series, the overall thermal efficiency η0 of the combined plant is given by
Joule cycle is used in:
For a gas turbine power plant, identify the correct pair of statementsP. Smaller in size compared to the steam power plant for same power outputQ. Starts quickly compared to the steam power plantR. Works on the principle of Rankine cycleS. Good compatibility with solid fuel.
In an engine working on air standard Stirling cycle, the temperature at the beginning of isothermal compression is 127°C. The engine thermal efficiency is 50%. The specific heat of air at constant volume is Cv. The heat transferred to the regenerator is