In cantilever beams, the steel bars are placed at ___________ – McqOptions

MCQOPTIONS

1.	In cantilever beams, the steel bars are placed at ___________
A.	Bottom of the beam
B.	Top of the Beam
C.	Midspan of the Beam
D.	Near supports
Answer» C. Midspan of the Beam

Discussion

No Comment Found

Related MCQs

__________ is the device used for measuring normal stresses on the surface of a stressed object.
Modular ratio method is also known as ______
Working stress method is based on elastic theory assumptions.
Calculate the level arm factor of a section of M20 grade and if Fe 415 Steel. [Take critical neutral axis factor as 0.289].
In cantilever beams, the steel bars are placed at ___________
The design compressive strength of concrete is ___________ times of characteristic compressive strength of concrete.
Partial safety factor for concrete is taken as ____________
Poisson s ratio for high strength concrete is __________
A simply supported beam of span 8 metres carries a udl of 16 kN/m at a point out of 60 kN acting at it s centre. Calculate the maximum shear force.
Calculate the maximum shear force for square beam of side is 320 mm. If the shear force is 94kN.