In a torsion test, if the wire that has to be tested has a diameter o – McqOptions

MCQOPTIONS

1.	In a torsion test, if the wire that has to be tested has a diameter of more than 0.333 inches, the specimen needs to have a minimum length of ________ inches.
A.	10
B.	33
C.	0.0966
D.	26
Answer» B. 33

Discussion

No Comment Found

Related MCQs

Torsional strength is the _________
Tensile stress can be obtained through rotations per minute using the following formula –= \(\frac{rpm×diameter}{2×wall\, thickness}\)
If a wire that has a diameter of less than 0.033 inches has to undergo a torsion test, the length of the specimen being used must be _________ inches.
The wire constantly experiences kinking when it is subjected to the torsion test.
What is the maximum speed up to which the clamp can be rotated in a torsion test?
In the torsion test, there are two clamps. The clamps are _________
The setup of a torsion test involves two clamps having a distance of _________ inches between them.
In a torsion test, if the wire that has to be tested has a diameter of more than 0.333 inches, the specimen needs to have a minimum length of ________ inches.
“Torsion” is defined as _________
It is a requirement for a ___________ to undergo the torsion test.