In a system with different shaft parameters, the longest shaft is tak – McqOptions

MCQOPTIONS

1.	In a system with different shaft parameters, the longest shaft is taken for calculations.
A.	True
B.	False
Answer» C.

Discussion

No Comment Found

Related MCQs

Frequency is independent of the no. of nodes.
A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a two node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
For a vibration system having different shaft parameters, calculate which of the following cannot be the diameter of the equivalent shaft if the diameters of shafts in m are: 0.05, 0.06, 0.07.
From the following data, calculate the location of node from the left end of shaft (l1).l1=0.6m, l2=0.5m, l3=0.4md1=0.095m, d2=0.06m, d3=0.05mMa = 900 Kg, Mb = 700 Kgka = 0.85m, kb = 0.55m
From the following data, calculate natural frequency of free torsional vibrations in Hz.l1=0.6m, l2=0.5m, l3=0.4md1=0.095m, d2=0.06m, d3=0.05mMa = 900 Kg, Mb = 700 Kgka = 0.85m, kb = 0.55mC = 80 GN/m2
In a system with different shaft parameters, the longest shaft is taken for calculations.
From the following data, calculate the equivalent length of shaft in m.l1=0.6m, l2=0.5m, l3=0.4md1=0.095m, d2=0.06m, d3=0.05m