Ideally Voltage Standing Wave Ratio (VSWR) should be – McqOptions

MCQOPTIONS

1.	Ideally Voltage Standing Wave Ratio (VSWR) should be
A.	As large as possible
B.	As small as possible
C.	As close to unity as possible
D.	Infinity
Answer» D. Infinity

Discussion

No Comment Found

Related MCQs

For a lossy transmission line, γ=0.02+j0.15 and is 20m long. The line is terminated with an impedance of a 400Ω. Then the input impedance of the transmission line given that the characteristic impedance of the transmission line is 156.13+j11.38Ω is:
For a distortion less line, R= 0.8Ω/m, G= 0.8 msiemens/m, L= 0.01µH/m then C is:
The condition for a distortion less line is:
If R = 1.5Ω/m, G = 0.2 mseimens/m, L = 2.5 nH/m, C = 0.1 pF/m for a low loss transmission line, then the attenuation constant of the transmission line is:
If the characteristic impedance of a transmission line is 50 Ω, and the inductance of the transmission line being 25 mH/m, the capacitance of the lossy transmission line is:
If the inductance and capacitance of a loss line transmission line are 45 mH/m and10 µF/m, the characteristic impedance of the transmission line is:
Expression for characteristic impedance Zₒ of a transmission line in terms of L and C the transmission line is:
Expression for α(attenuation constant) in terms of R , G, L and C of a transmission line is:
For a low loss line when both conductor and di-electric loss is small, the assumption that could be made is:
A long transmission line has considerable __________ effect