Geometric design of holding apron of these statements – McqOptions

MCQOPTIONS

1.	Geometric design of holding apron of these statements
A.	1 and 2 are correct
B.	2 and 3 are correct
C.	1 and 3 are correct
D.	1 alone is correct
Answer» E.

Discussion

No Comment Found

Related MCQs

The height of the pilot's eye above the runway surface is assumed
A gradient of + 0.08% is followed by a gradient of - 0.07%. If the permissible rate of change of grade is 0.003 per 30 metres, the length of the transition curve, is
The thickness design of the pavement, is decided on the load carried by
The coordinates of the ends of a runway are (5000, 5000) and (8000, 7000). The co-ordinates of an other runway are (4600, 5100) and (7000, 5300). The co-ordinates of the A.R.P. are
Effective length of a runway is the distance between
The maximum length and pavement strength of the runway is that of
The maximum value of the angle of turning of the nose gear large jet aircrafts, is limited to
According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by
The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is