For a hydropower plant having 150 m head of stored water behind the da – McqOptions

MCQOPTIONS

1.	For a hydropower plant having 150 m head of stored water behind the dam. The water in the reservoir is clear and load on the powerhouse is not likely to fluctuate much. Which type of turbine will be suitable for the same?
A.	Pelton turbine
B.	Francis turbine
C.	Kaplan turbine
D.	Propeller turbine
Answer» C. Kaplan turbine

Discussion

No Comment Found

Related MCQs

The Pumps in series operation allow the head to increase and the pumps in parallel operation increase the flow rate.
Pick the correct choice of turbine required to generate 10,000 HP under a head of 81 m while working at a speed of 500 rpm.
A draft tube is essentially required for impulse type turbines.
If the specific speed in revolution per minute of a turbine is in between 60 to 300, the type of the turbine is ________________
If two identical pumps each capable to deliver a discharge Q against a head H are connected ___________________________
For a hydropower plant working on 150 m head, the water is sandy and the load on the plant is highly variable. Which type of turbine will generally be recommended?
For a hydropower plant having 150 m head of stored water behind the dam. The water in the reservoir is clear and load on the powerhouse is not likely to fluctuate much. Which type of turbine will be suitable for the same?
In a Francis turbine, the water flows through a closed draft tube.
In a reaction turbine like a Francis turbine or a Kaplan turbine ______________
An impulse turbine like a Pelton s turbine is __________________________