Find the rate of conduction heat transfer through a 1.5 cm thick hardwood board, k = 0.16 W/m K, with a temperature difference between the two sides of 20 C.

Find the rate of conduction heat transfer through a 1.5 cm thick hardw

1.	Find the rate of conduction heat transfer through a 1.5 cm thick hardwood board, k = 0.16 W/m K, with a temperature difference between the two sides of 20 C.
A.	113 W/m<sup>2</sup>
B.	213 W/m<sup>2</sup>
C.	230 W/m<sup>2</sup>
D.	312 W/m<sup>2</sup>
Answer» C. 230 W/m<sup>2</sup>

Discussion

No Comment Found

Related MCQs

A 2 m2 window has a surface temperature of 15 C and the outside wind is blowing air at 2 C across it with a convection heat transfer coefficient of h = 125 W/m2K. What is the total heat transfer loss?
Find the rate of conduction heat transfer through a 1.5 cm thick hardwood board, k = 0.16 W/m K, with a temperature difference between the two sides of 20 C.
A water-heater is covered up with insulation boards over a total surface area of 3 m2. The inside board surface is at 75 C and the outside surface is at 20 C and the board material has a conductivity of 0.08 W/m K. How thick a board should it be to limit the heat transfer loss to 200 W ?
A radiant heat lamp is a rod, 0.5 m long, 0.5 cm in diameter, through which 400 W of electric energy is deposited. Assume the surface emissivity to be 0.9 and neglecting incoming radiation, find the rod surface temperature?
A burning wood in the fireplace has a surface temperature of 450 C. Assume the emissivity to be 1 and find the radiant emission of energy per unit area.
As the car slows down, the brake shoe and steel drum continuously absorbs 25 W. Assume a total outside surface area of 0.1 m2 with a convective heat transfer coefficient of 10 W/Km2 to the air at 20 C. How hot does the outside brake and drum surface become when steady conditions are reached?
A small light bulb (25 W) inside a refrigerator is kept on and 50 W of energy from the outside seeps into the refrigerated space. How much of temperature difference to the ambient(at 20 C) must the refrigerator have in its heat exchanger having an area of 1 m2 and heat transfer coefficient of 15 W/Km2 to reject the leak of energy.
The black grille on the back of a refrigerator has a surface temperature of 35 C with a surface area of 1 m2. Heat transfer to the room air at 20 C takes place with convective heat transfer coefficient of 15 W/Km^2. How much energy is removed during 15 minutes of operation?
A large heat exchanger transfers a total of 100 MW. Assume the wall separating steam and seawater is 4 mm of steel, conductivity 15 W/m K and that a maximum of 5 C difference between the two fluids is allowed. Find the required minimum area for the heat transfer.
On a winter day with atmospheric air at 15 C, the outside front wind-shield of a car has surface temperature of +2 C, maintained by blowing hot air on the inside surface. If the wind-shield is 0.5 m2 and the outside convection coefficient is 250 W/Km2, find the rate of energy loss through front wind-shield.

Find the rate of conduction heat transfer through a 1.5 cm thick hardwood board, k = 0.16 W/m K, with a temperature difference between the two sides of 20 C.

Discussion

No Comment Found

Related MCQs

Reply to Comment