During the manufacture of sulphuric acid, the temperature of molten s – McqOptions

MCQOPTIONS

1.	During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160Â°C, as
A.	it is very corrosive at elevated temperature.
B.	its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced).
C.	it decomposes on further increasing the temperature.
D.	none of these.
Answer» C. it decomposes on further increasing the temperature.

Discussion

No Comment Found

Related MCQs

The compressive strength of cement should not be less than about 110Kg/cm 2 after three days & not less than 170Kg/cm 2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm 2 /gm.
Low temperature carbonisation of coal takes place at __________ Â°C.
In contact process, SO 3 is absorbed in 97% H 2 SO 4 and not in water, because
In an integrated steel plant, NH 3 present in coke oven gas is normally recovered as
Alum [Al 2 (SO 4 ) 3 ] is used as a coagulant in water treatment to remove
90% of the caprolactum is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ Â°C.
Fermentator temperature during production of alcohol from molasses is around __________ Â°C.
Consider the production of ammonia from methene and air as raw materials. The catalyst used are: ( i ) __________ for steam reforming of methane and ( ii ) __________ for ammonia synthesis.
Presence of H 2 S in raw water (to be chlorinated) results in the
Hydrazine (N 2 H 4 ) is used mainly as a/an