During the construction of earthquake-resistant buildings, it should – McqOptions

MCQOPTIONS

1.	During the construction of earthquake-resistant buildings, it should be kept in mind that those solid concrete blocks should be used which have crushing strength not lesser than _________
A.	10 MPa
B.	20 MPa
C.	35 MPa
D.	60 MPa
Answer» D. 60 MPa

Discussion

No Comment Found

Related MCQs

The vertical thickness of the reinforced concrete band should be _______ minimum where four longitudinal bars are specified.
The width of the reinforced concrete band is taken the same as the __________ of the wall.
The concrete used in coastal areas during the construction of earthquake-resistant buildings should be of grade __________
The window and door openings increase the lateral load resistance of the walls.
Masonry bearing walls should not be built of height greater than _________ subject to a maximum of four storeys when measured from the mean ground level to the ride level during the construction of earthquake-resistant buildings.
Where the masonry is provided with steel reinforcing bars, the bars should be embedded with adequate cover in cement concrete of grade _________
During the construction of earthquake-resistant buildings, it should be kept in mind that those solid concrete blocks should be used which have crushing strength not lesser than _________
The design of the projecting parts during the construction of earthquake-resistant buildings should be per ________
During the construction of earthquake-resistant buildings, ceiling plaster should be avoided. In case it cannot be avoided, it should be as thick as possible.
Earthquake force is a function of __________