During a test, discharge measured through a hydraulic spray nozzle was 45010-6 m3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________

During a test, discharge measured through a hydraulic spray nozzle was

1.	During a test, discharge measured through a hydraulic spray nozzle was 45010^-6 m³/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________
A.	2.82%
B.	3.87%
C.	4.87%
D.	5.87%
Answer» D. 5.87%

Discussion

No Comment Found

Related MCQs

An air blast of sprayers is to be operated at 3 km/hour and desired application rate is 18 l/tree. The tree spacing is 9*9 m and nozzle delivers 5 l/min at operating pressure of 4*105 N/m2. How many nozzles would be needed?
During a test, discharge measured through a hydraulic spray nozzle was 45010-6 m3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________
A field sprayer having a horizontal boom with 20 nozzles spaced 40 cm apart is to be designed for maximum application rate of 650 l/ha at nozzle pressure of kPa and forward speed of km/h. What will be the pump capacity in l/min?
A hydraulic sprayer fitted with hollow cone nozzle is required to be calibrated for application rate 150 l/ha. The sprayer speed is 6.5/h, nozzle spacing is 50 cm, and the available 0.787 mm orifice diameter nozzle is rated at 0.473 l/min. What will be the nozzle flow rate?
What is the formula used for calculating VMD, when pressure is less than 675 kPa?
What will be the diameter of base of a spray cone in a boom sprayer?
A sprayer having 0.4 L/min nozzle discharge rate and 50 cm width of coverage is required to apply 0.8 kg of active ingredient per hectare. If 1 kg of active ingredient is content in 120 L of spray solution. What will be the speed of travel of sprayer?
A hydraulic sprayer fitted with hollow nozzle is required to be calibrated for application rate 150 L/ha. The sprayer speed is 6.5 km/h. Nozzle spacing is 50 cm. The available 0.787 mm orifice diameter. Nozzle is rated at 0.473 L/min. What is the nozzle flow rate?
What is the Nozzle Flow Rate (NFR)?
During a discharge measured through a hydraulic spray nozzle was 450*10-6m3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%. The percent increase in discharge will be _______

During a test, discharge measured through a hydraulic spray nozzle was 45010-6 m3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________

Discussion

No Comment Found

Related MCQs

Reply to Comment

During a test, discharge measured through a hydraulic spray nozzle was 45010^-6 m³/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________