Dielectric heating apparatus consists of

1.	Dielectric heating apparatus consists of
A.	4 electrodes
B.	Elemental strip
C.	No Insulating material
D.	4 plates
Answer» C. No Insulating material

Discussion

No Comment Found

Related MCQs

A slab of insulating material of thickness 6 cm and thermal conductivity 1.4kJ/m hr deg is placed between and is in contact with two parallel electrodes, and is then subjected to high frequency dielectric heating at a uniform rate of 140,000kJ/m3 hr. At steady state coefficients of combined radiation and convection are 42 and 48 kJ/m2 hr deg. If atmospheric temperature is 25 degree Celsius, find surface temperatures?
The given expression can be used to solve the electrode temperature t w1 and t w2q g δ = h 1 α 1 + h 2 α 2Where, α 1 = A (t w 2 – t a) and α 2 = (t w1 – t a).
Dielectric heating apparatus consists of
What maximum thickness of concrete can be poured without causing the temperature gradient to exceed 98.5 degree Celsius per meter anywhere in the slab? Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m3. Workout the maximum temperature of concrete
A composite slab consists of 5 cm thick layer of steel (k = 146 kJ/m hr degree) on the left side and a 6 cm thick layer of brass (k = 276 kJ/m hr degree) on the right hand side. The outer surfaces of the steel and brass are maintained at 100 degree Celsius and 50 degree Celsius. The contact between the two slabs is perfect and heat is generated at the rate of 4.2 * 10 5 k J/m2 hr at the plane of contact. The heat thus generated is dissipated from both sides of composite slab for steady state conditions. Calculate the temperature at the interface
Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m3. Workout the maximum temperature of concrete
THE_GIVEN_EXPRESSION_CAN_BE_USED_TO_SOLVE_THE_ELECTRODE_TEMPERATURE_T_W1_AND_T_W2?$
A slab of insulating material of thickness 6 cm and thermal conductivity 1.4kJ/m hr deg is placed between and is in contact with two parallel electrodes, and is then subjected to high frequency dielectric heating at a uniform rate of 140,000kJ/m3 hr. At steady state coefficients of combined radiation and convection are 42 and 48 kJ/m2 hr deg. If atmospheric temperature is 25 degree Celsius, find surface temperatures?$
Dielectric heating apparatus consists o?
What maximum thickness of concrete can be poured without causing the temperature gradient to exceed 98.5 degree Celsius per meter anywhere in the slab? Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m3. Workout the maximum temperature of concrete

Dielectric heating apparatus consists of

Discussion

No Comment Found

Related MCQs

Reply to Comment