Consider we have a Double pipe Heat Exchanger, with inner tube of diameter 20mm (neglect thickness) and outer tube of diameter 30mm. We have two fluids A & B (KA = 15W/mK and KB = 20W/mK) we desire to have their flow rates as 15m3/s and 21m3/s respectively. If their Nusselt number after calculation is Nui = 429 and Nuo = 530. What is the overall heat transfer coefficient of the equipment is no fouling exists?

Consider we have a Double pipe Heat Exchanger, with inner tube of dia

1.	Consider we have a Double pipe Heat Exchanger, with inner tube of diameter 20mm (neglect thickness) and outer tube of diameter 30mm. We have two fluids A & B (KA = 15W/mK and KB = 20W/mK) we desire to have their flow rates as 15m3/s and 21m3/s respectively. If their Nusselt number after calculation is Nui = 429 and Nuo = 530. What is the overall heat transfer coefficient of the equipment is no fouling exists?
A.	168.4 W/m2K
B.	168.4×103 KW/m2K
C.	188.4 W/m2K
D.	168.4 KW/m2K
Answer» E.

Discussion

No Comment Found

Related MCQs

In a double pipe heat exchanger, in the inner side fluid enters at 20℃ and leaves at 45℃. The annulus has steam condensing at 1atm. What is the value of LMTD?
For the calculation of Overall Heat transfer coefficient for fouling factor R, which one of the following expression do we use?
Consider we have a Double pipe Heat Exchanger, with inner tube of diameter 20mm (neglect thickness) and outer tube of diameter 30mm. We have two fluids A & B (KA = 15W/mK and KB = 20W/mK) we desire to have their flow rates as 15m3/s and 21m3/s respectively. If their Nusselt number after calculation is Nui = 429 and Nuo = 530. What is the overall heat transfer coefficient of the equipment is no fouling exists?
When gas is used as a fluid in a double pipe heat exchanger, which one of the following is not true?
In an operation where we want to heat a stream of liquid by Steam, we have the option to use extended fins. Then which of the following is best suited?
Which of the following is not a subset of the category of Tubular Heat Exchangers?
In an operation when we want to heat a stream of liquid by Steam, we usually keep steam on the annular side and fluid on the inner side.
How many times do we have to calculate for Nusselt number in a Double Pipe Heat Exchanger?
Consider we have a Double Pipe Heat Exchanger, with the inner tube of diameter 20mm (neglect thickness) and outer tube of diameter 30mm. We have two fluids A & B, we desire to have their flow rates as 15m3/s and 21m3/s respectively. Which fluid pass arrangement would be best suited for the HE?
Which is the major mean of heat transfer in a Double Pipe heat exchanger?

Discussion

No Comment Found

Related MCQs

Reply to Comment