Coaxing is a process of – McqOptions

MCQOPTIONS

1.	Coaxing is a process of
A.	Improving the fatigue properties, attained by under-stressing and then raising the stress in small increments
B.	Decreasing the hardness by full annealing
C.	Increasing the uniaxial tensile strength by heating above recrystallization temperature and quenching in oil media
D.	Maintaining the ductility of the material by chemical treatment
Answer» B. Decreasing the hardness by full annealing

Discussion

No Comment Found

Related MCQs

For the given fluctuating fatigue load, the values of stress amplitude and stress ratio are respectively
If Kf is the fatigue stress concentration factor and Kt is the theoretical stress concentration factor then, the notch sensitivity q is?
Coaxing is a process of
Minimum center distance is to be maintained between two gears with respect to
Endurance limit is of primary concern in the design of a/an1. rotating shaft2. industrial structure3. column4. machine baseWhich of the above is/are correct?
Beach or clamshell marks on a failed metallic surface are typical of
A steel connecting rod having Sut = 1000 MN/m2, Syt = 900 MN/m2 is subjected to a completely reversed axial load of 50 kN. By neglecting any column action, if the values of kc = 0.85, kb = 0.9, ka = 0.82, kt = 1.5, q = 0.6 and N = 2, the diameter of the rod will be nearly
For which one of the following loading conditions is the standard endurance strength multiplied by a load factor, Ke = 0.9?
Endurance limit is related to
A static load is mounted at the center of a shaft rotating at uniform angular velocity. This shaft will be designed for