CO=40%, H2=12%, CO2=6%, CH2=2%, N2=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m3 of gas?

CO=40%, H2=12%, CO2=6%, CH2=2%, N2=50% are the components in the coal.

1.	CO=40%, H₂=12%, CO₂=6%, CH₂=2%, N₂=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m³ of gas?
A.	CO<sub>2</sub>=14.9%,N<sub>2</sub>=80%,O<sub>2</sub>=5.2%
B.	CO<sub>2</sub>=12.2%,N<sub>2</sub>=70.8%,O<sub>2</sub>=6.5%
C.	CO<sub>2</sub>=14.9%,N<sub>2</sub>=79.9%,O<sub>2</sub>=5.2%
D.	CO<sub>2</sub>=13%,N<sub>2</sub>=77%,O<sub>2</sub>=75
Answer» D. CO<sub>2</sub>=13%,N<sub>2</sub>=77%,O<sub>2</sub>=75

Discussion

No Comment Found

Related MCQs

CO=40%, H2=12%, CO2=6%, CH2=2%, N2=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m3 of gas?
The coal sample contains=80%; H=4%; O=2%; N=12%; S=2%, the remainder is ash and then calculate the volume of air required for perfect combustion of 1kg of fuel assuming STP conditions.
A sample of coal containing the following elements:C=90%; H=5%; ash=4%; weight of the coal burnt=0.90g; weight of the water taken=600g; water equivalent of bomb calorimeter=2000g; rise in temperature=2.48oC; fuse wire correction=10cal; cooling correction=0.02oC; acid correction=50 cal. Calculate net and GCV of coal in cal/g. Assume latent heat of steam is 580cal/g.
Calculate the HCV and NCV of the coal for the following data.Weight of the coal=0.8gWater equivalent of calorimeter=460gWeight of the water=2600gRise in temperature=2.42oCCooling corrections=0.052oCFuse wire corrections=10 caloriesH=6% and assume latent heat of steam=600cal/g.
Calculate the GCV and NCV of a fuel from the following data. Volume of the fuel burnt at STP is 0.08m2.Weight of the water used for cooling is 24kg.Temperature of inlet and outlet water is 25oC. and 30oC respectively. Weight of water obtained by steam condensation is 0.02kg.
Which of the following is not the constitute of CNG?
Which of the following releases less amount of carbon dioxide per unit of energy?
CO=40%, H2=12%, CO2=6%, CH2=2%, N2=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m3 of gas?
The coal sample contains=80%;H=4%;O=2%;N=12%;S=2%, the remainder is ash and then calculate the volume of air required for perfect combustion of 1kg of fuel assuming STP conditions.
Calculate the weight and volume of air required for the complete combustion of 2kg of carbon.

CO=40%, H2=12%, CO2=6%, CH2=2%, N2=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m3 of gas?

Discussion

No Comment Found

Related MCQs

Reply to Comment

CO=40%, H₂=12%, CO₂=6%, CH₂=2%, N₂=50% are the components in the coal. What will be the composition of the dry flue gas, if the 50% excess air was used for burning 100m³ of gas?