An insulated cylinder fitted with a piston contains 0.1 kg of water at 100 C and 90% quality. The piston is moved, compressing the water till it reaches a pressure of 1.2 MPa. How much work is required in the process?

An insulated cylinder fitted with a piston contains 0.1 kg of water at

1.	An insulated cylinder fitted with a piston contains 0.1 kg of water at 100 C and 90% quality. The piston is moved, compressing the water till it reaches a pressure of 1.2 MPa. How much work is required in the process?
A.	-27.5 kJ
B.	-47.5 kJ
C.	-17.5 kJ
D.	-37.5 kJ
Answer» E.

Discussion

No Comment Found

Related MCQs

Water at 250 C, 1000 kPa is brought to saturated vapour in a piston/cylinder with an isothermal process. Find the specific work.
A piston/cylinder has 2kg water at 250 C, 1000 kPa which is now cooled with a constant load on the piston. This isobaric process ends when the water has reached a state of saturated liquid. Find the work.
A cylinder containing R-134a at 150 kPa, 10 C has an initial volume of 20 L. A piston compresses the R-134a in a isothermal, reversible process until it reaches the saturated vapour state. Calculate the required work in the process.
A piston cylinder has R-134a at 100 kPa, 20 C which is compressed to 500 kPa in a reversible adiabatic process. Find the specific work.
A piston/cylinder has 2kg ammonia at 100 kPa, 50 C which is compressed to 1000 kPa. The temperature is assumed to be constant. Find the work for the process assuming it to be reversible.
1kg of water at 300 C expands against a piston in a cylinder until it reaches 100 kPa, at which point the water has a quality of 90.2%. The expansion is reversible and adiabatic. How much work is done by the water?
Compression and heat transfer brings R-134a from 50 C, 500 kPa to saturated vapour in an isothermal process. Find the specific work.
An insulated cylinder fitted with a piston contains 0.1 kg of water at 100 C and 90% quality. The piston is moved, compressing the water till it reaches a pressure of 1.2 MPa. How much work is required in the process?
A cylinder-piston contains ammonia at 50 C, 20% quality, volume being 1 L. The ammonia expands slowly, and heat is transferred to maintain a constant temperature. The process continues until all liquid is gone. Determine the work for this process.
1kg of ammonia in a piston/cylinder at 50 C, 1000 kPa is expanded in a reversible adiabatic process to 100 kPa. Find the work for this process.

An insulated cylinder fitted with a piston contains 0.1 kg of water at 100 C and 90% quality. The piston is moved, compressing the water till it reaches a pressure of 1.2 MPa. How much work is required in the process?

Discussion

No Comment Found

Related MCQs

Reply to Comment