An increase in fin effectiveness is caused by a high value of(i) Convective coefficient(ii) Thermal conductivity(iii) Circumference(iv) AreaIdentify the correct statement

An increase in fin effectiveness is caused by a high value of(i) Conv

1.	An increase in fin effectiveness is caused by a high value of(i) Convective coefficient(ii) Thermal conductivity(iii) Circumference(iv) AreaIdentify the correct statement
A.	i and iii
B.	iii and iv
C.	ii and iv
D.	ii and iii
Answer» D. ii and iii

Discussion

No Comment Found

Related MCQs

Mark the false statement regarding effectiveness of fin
Let us assume a square section fin split longitudinally and used as two fins. This will result in
The handle of a saucepan, 30 cm long and 2 cm in diameter, is subjected to 100 degree Celsius temperature during a certain cooking operation. The average unit surface conductance over the handle surface is 7.35 W/m2 degree in the kitchen air at 24 degree Celsius. The cook is likely to grasp the last 10 cm of the handle and hence the temperature in this region should not exceed 38 degree Celsius. What should be the thermal conductivity of the handle material to accomplish it? The handle may be treated as a fin insulated at the tip
A steel strap is serving as a support for the steam pipe. The strap is welded to the pipe and bolted to the ceiling. The junction between the support strut and the ceiling is adiabatic, and the outside temperature of steam pipe is 105 degree Celsius. The strut AB is 60 cm high and AD = BC = 12.5 cm. It is 0.3 cm thick. Workout the rate at which heat is lost to the surrounding air by the support strut. It may be assumed that thermal conductivity for steel is 45 W/m degree, the total outside surface coefficient is 17 W/m2 degree and the surrounding air is at 32 degree Celsius
An increase in fin effectiveness is caused by a high value of(i) Convective coefficient(ii) Thermal conductivity(iii) Circumference(iv) AreaIdentify the correct statement
Consider the following statements pertaining to heat transfer through fins(i) They must be arranged at right angles to the direction of flow of working fluid(ii) The temperature along the fin is variable and accordingly heat transfer rate varies along the fin elements(iii) Fins are equally effective irrespective whether they are on the hot side or cold side of the fluid(iv) Fins are made of materials that have thermal conductivity higher than that of wallIdentify the correct statements
The fins would be effective for heat conduction if the ratio P k/h A C is
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin
The following factors need consideration for the optimum design of fins(i) Cost(ii) Space considerations(iii) Weight considerationsChoose the correct option
MARK_THE_FALSE_STATEMENT_REGARDING_EFFECTIVENESS_OF_FIN?$

An increase in fin effectiveness is caused by a high value of(i) Convective coefficient(ii) Thermal conductivity(iii) Circumference(iv) AreaIdentify the correct statement

Discussion

No Comment Found

Related MCQs

Reply to Comment