An electric train car, having a mass of 25 Mg, travels up a 10¬∞ incline with a constant speed of 80 km/h. Determine the power required to overcome the force of gravity.

An electric train car, having a mass of 25 Mg, travels up a 10¬∞ i

1.	An electric train car, having a mass of 25 Mg, travels up a 10¬∞ incline with a constant speed of 80 km/h. Determine the power required to overcome the force of gravity.
A.	P = 961 kW
B.	P = 346 kW
C.	P = 341 kW
D.	P = 946 kW
Answer» E.

Discussion

No Comment Found

Related MCQs

An electric train car, having a mass of 25 Mg, travels up a 10¬∞ incline with a constant speed of 80 km/h. Determine the power required to overcome the force of gravity.
A car, assumed to be rigid and having a mass of 800 kg, strikes a barrel-barrier installation without the driver applying the brakes. From experiments, the magnitude of the force of resistance Fr, created by deforming the barrels successively, is shown as a function of vehicle penetration. If the car strikes the barrier traveling at Vc = 70 km/h, determine approximately the distance s to which the car penetrates the barrier.
A motor hoists a 50-kg crate at constant speed to a height of h = 6 m in 3 s. If the indicated power of the motor is 4 kw, determine the motor's efficiency.
The book A having a weight of 1.5 lb slides on the smooth horizontal slot. If the block is drawn back so that s = 0. Each of the two springs has a stiffness of k = 150 lb/ft and an unstretched length of 0.5 ft.
A car is equipped with a bumper B designed to absorb collisions. The bumper is mounted to the car using pieces of flexible tubing T. Upon collision with a rigid barrier A, a constant horizontal force F is developed which causes a car deceleration of 3g = 29.43 m/s2 (the highest safe deceleration for a passenger without a seatbelt). If the car and passenger have a total mass of 1.5 Mg and the car is initially coasting with a speed of 1.5 m/s, compute the magnitude of F needed to stop the car and the deformation x of the bumper tubing.
The "flying car" is a ride at an amusement park, which consists of a car having wheels that roll along a track mounted on a drum. Motion of the car is created by applying the car's brake, thereby gripping the car to the track and allowing it to move with a speed of vt = 3m/s. If the rider applies the brake when going from B to A and then releases it at the top of the drum, A, so that the car coasts freely down along the track to B ( = rad), determine the speed of the car at B and the normal reaction which the drum exerts on the car at B. The rider and car have a total mass of m = 250 kg and the center of mass of the car and rider moves along a circular path of radius r = 8 m.
A truck has a weight of 25,000 lb and an engine which transmits a power of 350hp. Assuming that the wheels do not slip on the ground, determine the angle of the largest incline the truck can climb at a constant speed of v = 50 ft/s.
The coefficient of friction between the 2-lb block and the surface is = 0.2. The block is acted upon by a horizontal force of P. Determine the maximum deformation of the outer spring B at the instant the block comes to rest. Spring B has a stiffness of KB = 20 lb/ft and the "nested" spring C has a stiffness of kc = 40 lb/ft.
The block has a weight of 1.5 lb and slides along the smooth chute AB. It is released from rest at A, which has coordinates of A(5 ft, 0, 10 ft). Determine the speed at which it slides off at B, which has coordinates of B(0, 8 ft, 0).
When at A the bicyclist has a speed of vA = ft/s. If he coasts without pedaling from the top of the hill at A to the shore of B and then leaps off the shore, determine his speed at B and the distance x where he strikes the water at C. The rider and his bicycle have a total weight of 150 lb. Neglect the size of the bicycle and wind resistance.

An electric train car, having a mass of 25 Mg, travels up a 10¬∞ incline with a constant speed of 80 km/h. Determine the power required to overcome the force of gravity.

Discussion

No Comment Found

Related MCQs

Reply to Comment