A uniform, slender cylindrical rod is made of a homogeneous and isotro – McqOptions

MCQOPTIONS

1.	A uniform, slender cylindrical rod is made of a homogeneous and isotropic material. The rod rests on a frictionless surface. The rod is heated uniformly. If the radial and longitudinal thermal stress are represented by σx and σz, then ___________
A.	σx = 0, σy = 0
B.	σx not equal to 0, σy = 0
C.	σx = 0, σy not equal to 0
D.	σx not equal to 0, σy not equal to 0
Answer» B.

Discussion

No Comment Found

Related MCQs

A uniform, slender cylindrical rod is made of a homogeneous and isotropic material. The rod rests on a frictionless surface. The rod is heated uniformly. If the radial and longitudinal thermal stress are represented by σx and σz, then ___________
A steel rod of length L and diameter D, fixed at both ends, is uniformly heated to a temperature rise of δT. The Youngs modulus is E and the coefficient of linear expansion is unity. The thermal stress in the rod is ____________
A steel rod is heated from 25 to 250 degree celcius. Its coefficient of thermal expansion is 10-5 and E = 100 GN/m2. if the rod is free to expand, the thermal stress developed in it is:
A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?
A steel bar 600mm long and having 30mm diameter, is turned down to 25mm diameter for one fourth of its length. It is heated at 30 C above room temperature, clamped at both ends and then allowed to cool to room temperature. If the distance between the clamps is unchanged, the maximum stress in the bar ( α = 12.5 x 10-6 per C and E = 200 GN/m2) is
The length, Young’s modulus and coefficient of thermal expansion of bar P are twice that of bar Q. what will be the ration of stress developed in bar P to that in bar Q if the temperature of both bars is increased by the same amount?