A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?

A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degr

1.	A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?
A.	192 MPa(tensile)
B.	212 MPa(tensile)
C.	192MPa(compressive)
D.	212 MPa(compressive)
Answer» D. 212 MPa(compressive)

Discussion

No Comment Found

Related MCQs

The length, coefficient of thermal expansion and Youngs modulus of bar A are twice of bar B. If the temperature of both bars is increased by the same amount while preventing any expansion, then the ratio of stress developed in bar A to that in bar B will be ___________
which one of the following are true for the thermal expansion coefficient?
A uniform, slender cylindrical rod is made of a homogeneous and isotropic material. The rod rests on a frictionless surface. The rod is heated uniformly. If the radial and longitudinal thermal stress are represented by σx and σz, then ___________
A steel rod of length L and diameter D, fixed at both ends, is uniformly heated to a temperature rise of δT. The Youngs modulus is E and the coefficient of linear expansion is unity. The thermal stress in the rod is ____________
Which one of the following pairs is NOT correctly matched?a) Temperature strain with permitted expansion – ( αTl – δ)b) Temperature thrust – ( αTE)c) Temperature stress – (αTE
A steel rod is heated from 25 to 250 degree celcius. Its coefficient of thermal expansion is 10-5 and E = 100 GN/m2. if the rod is free to expand, the thermal stress developed in it is:
The thermal stress is a function of _____________P. Coefficient of linear expansionQ. Modulus of elasticityR. Temperature rise
A cube with a side length of 1m is heated uniformly a degree celcius above the room temperature and all the sides are free to expand. What will be the increase in the volume of the cube? Consider the coefficient of thermal expansion as unity.
A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?
A steel bar 600mm long and having 30mm diameter, is turned down to 25mm diameter for one fourth of its length. It is heated at 30 C above room temperature, clamped at both ends and then allowed to cool to room temperature. If the distance between the clamps is unchanged, the maximum stress in the bar ( α = 12.5 x 10-6 per C and E = 200 GN/m2) is

A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?

Discussion

No Comment Found

Related MCQs

Reply to Comment