A simple supported steel I beam is replaced by a C-channel made with a – McqOptions

MCQOPTIONS

1.	A simple supported steel I beam is replaced by a C-channel made with aluminum. Both sections have similar moment of inertia and are subjected to same loading. The following will remain true,
A.	The maximum bending stress and deflection will remain unaltered
B.	Only the maximum bending stress will remain unaltered
C.	Only the maximum deflection will remain unaltered
D.	None of the above
Answer» C. Only the maximum deflection will remain unaltered

Discussion

No Comment Found

Related MCQs

The bending stress is ____________
What is the expression of the bending equation?
Stress in a beam due to simple bending is ____________
A beam is said to be of uniform strength, if ____________
A beam has a solid circular cross-section having diameter d. If a section of the beam is subjected to a shear force F, the maximum shear stress in the cross-section is given by
A shaft is subjected to bending moment, M and a torque, T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in a shaft is
A steel plate is bent into a circular arc of radius 10 m. If the plate section be 120 mm wide and 20 mm thick, with E = 2 × 105 N/mm2, then the maximum bending stress-induced is
At a point in the web of a girder the bending stress (σx) is 3 MPa (tensile) and the shearing stress (τ) at the same point is 2 MPa, then the maximum shear stress is
A steel beam is replaced by a corresponding aluminum beam of the same cross-sectional shape and dimension and is subjected to the same loading. The maximum bending stress now will be
A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of bending stress occur?