A silicon plate of thickness 1mm, breadth 10mm and length 100mm is pla – McqOptions

MCQOPTIONS

1.	A silicon plate of thickness 1mm, breadth 10mm and length 100mm is placed in a magnetic field of 0.5 Wb/m² acting perpendicular to its thickness. If 10^-3 A current flows along its length, calculate the Hall voltage developed, if the Hall coefficient is 3.66 10⁴ m³/Coulomb.
A.	1.83 10<sup>-3</sup> Volts
B.	3.66 10<sup>-4</sup> Volts
C.	0.5 Volts
D.	25.150 Volts
Answer» B. 3.66 10<sup>-4</sup> Volts

Discussion

No Comment Found

Related MCQs

For semiconductors, the resistivity is inversely proportional to the temperature for semiconducting materials.
The conductivity of germanium at 20 C is 2/ohm m. What is its conductivity at 40 C? E<sub>g</sub>=0.72eV
A silicon plate of thickness 1mm, breadth 10mm and length 100mm is placed in a magnetic field of 0.5 Wb/m<sup>2</sup> acting perpendicular to its thickness. If 10<sup>-3</sup> A current flows along its length, calculate the Hall voltage developed, if the Hall coefficient is 3.66 10<sup>4</sup> m<sup>3</sup>/Coulomb.
The intrinsic carrier density at room temperature in Ge is 2.37 10<sup>19</sup>/m<sup>3</sup>. If the electron and hole mobilities are 0.38 and 0.18 m<sup>2</sup>/Vs respectively. Calculate its resistivity.
A semiconducting crystal 12mm long, 5mm wide and 1mm thick has a magnetic flux density of 0.5Wb/m<sup>2</sup> applied from front to back perpendicular to largest faces. When a current of 20mA flows length wise through the specimen, the voltage measured across its width is found to be 37 V. What is the Hall coefficient of this semiconductor?
Which method can be used to distinguish between the two types of carriers?