A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the maximum torque which is transmitted.

A cone clutch transmits 24kW at 490rpm. The coefficient of friction is

1.	A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the maximum torque which is transmitted.
A.	502.4N-m
B.	542.3N-m
C.	467.72N-m
D.	454.5N-m
Answer» D. 454.5N-m

Discussion

No Comment Found

Related MCQs

The centrifugal clutches are used in light duty vehicles and not in heavy duty vehicles.
Chain saws, lawnmowers, golf carts etc. never use centrifugal clutches.
In a centrifugal clutch, when the centrifugal force is slightly more than the spring force, shoe begins to move in a radially inward direction.
Centrifugal clutches are not recommended for IC engine applications.
A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; calculate force required to engage clutch.
A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the face width of friction lining.
A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the inner diameter.
A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the maximum torque which is transmitted.
A cone clutch with a small semi cone angle requires a relatively large force to engage and small force to disengage.
When semi vertical angle is greater than angle of static friction, clutch results in self-engagement.

A cone clutch transmits 24kW at 490rpm. The coefficient of friction is 0.2 and allowable intensity of pressure is 0.35N/mm . The semi cone angle is 12 . The outer diameter is fixed as 310mm.Assuming uniform wear theory; find the maximum torque which is transmitted.

Discussion

No Comment Found

Related MCQs

Reply to Comment