A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m2 and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.

A concrete gravity dam having a maximum reservoir level at 200 m and t

1.	A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m² and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.
A.	H = 90 m High gravity dam
B.	H = 90 m Low gravity dam
C.	H = 214.2 m High gravity dam
D.	H = 214.2 m Low gravity dam
Answer» B. H = 90 m Low gravity dam

Discussion

No Comment Found

Related MCQs

Presence of tail-water in a gravity dam ____________________
The axis of a gravity dam is the ______________________
A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m<sup>2</sup> and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.
The small openings made in the huge body of a concrete gravity dam such as sluices and inspection galleries can be assumed to be causing only local effects without any appreciable effect on the distribution of stresses as per the principle of_____________________
What is the recommended value of shear friction factor against sliding?
The vertical stress at the toe was found to be 3.44 MPa at the base of the gravity dam section. If the downstream face of the dam has a slope of 0.617 horizontal: 1 vertical, the maximum principal stress at the toe of the dam when there is no tailwater is _______________
A low gravity dam of elementary profile made up of concrete of relative density 2.57 and safe allowable stress of foundation material 4.2 MPa. What is the maximum height of the dam without considering the uplift force?
The base width of a solid gravity dam is 35 m and the specific gravity of dam material is 2.45. What is the approximate allowable height of the dam having an elementary profile without considering the uplift?
For full reservoir condition in a gravity dam, the critical combination of vertical and horizontal earthquake accelerations to be considered for checking the stability is ________________________
In high dams, the safety against sliding should be checked only for friction.

A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m2 and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.

Discussion

No Comment Found

Related MCQs

Reply to Comment

A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m² and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.