Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

A Frame in the baseband layer can be of

A. 1 Type
B. 2 Types
C. 3 Types
D. 4 Types
Answer» D. 4 Types
2.

In IEEE 802.11 frames, when the values of, To DS and from DS are 11, its means the distribution system is

A. Local Area Network
B. Wireless Area Network
C. Metropolitan Network
D. None of the given
Answer» C. Metropolitan Network
3.

HEC field in Bluetooth data frame is used for

A. Error detection
B. Error Correction
C. Data Flow
D. Propagation delay
Answer» C. Data Flow
4.

The data rate of Bluetooth is

A. 4 Mbps
B. 3 Mbps
C. 2 Mbps
D. 1 Mbps
Answer» E.
5.

A set that makes stationary or mobile wireless station and also have optional central base station is known as

A. Basic service set
B. Extended service set
C. Network point set
D. Access point
Answer» B. Extended service set
6.

The special control frame that is used in the repetition interval is called

A. Network Frame
B. Beacon Frame
C. Request Frame
D. Send Frame
Answer» C. Request Frame
7.

IEEE 802.11 covers the physical layer and

A. Network layer
B. Data link layer
C. Session layer
D. Transport layer
Answer» C. Session layer
8.

A Bluetooth LAN is an

A. Adhoc Network
B. Infrastructure Signals
C. Adhoc signals
D. Infrastructure LAN
Answer» B. Infrastructure Signals
9.

The Media Access Control layer frame has

A. 5 Fields
B. 7 Fields
C. 9 Fields
D. 11 Fields
Answer» D. 11 Fields
10.

IEEE 802.11 defines the basic service set as the building block of a wireless

A. LAN
B. WAN protocol
C. MAN
D. All of the above
Answer» B. WAN protocol
11.

A Bluetooth network is called

A. Wireless Network
B. WAN
C. Piconet
D. LAN
Answer» D. LAN
12.

The term in which a station can move from one basic service set to another is called

A. BSS transition mobility
B. ESS transition mobility
C. No transition mobility
D. None of the above
Answer» B. ESS transition mobility
13.

In field control frames, there are four address in which address 1 is always the address of

A. Next device
B. Previous device
C. Final destination
D. Original source
Answer» B. Previous device
14.

In IEEE 802.11, when a frame is going from one station in a BSS to another without passing through the distribution system, the address flag is _____

A. 00
B. 01
C. 10
D. 11
Answer» B. 01
15.

In IEEE 802.11, when a frame is going from a station to an AP, the address flag is _____.

A. 00
B. 01
C. 10
D. 11
Answer» D. 11
16.

In IEEE 802.11, when a frame is coming from an AP and going to a station, the address flag is _______.

A. 00
B. 01
C. 10
D. 11
Answer» C. 10
17.

In IEEE 802.11, when a frame is going from one AP to another AP in a wireless distribution system, the address flag is _____.

A. 00
B. 01
C. 10
D. 11
Answer» E.
18.

Which of the following is a language that allows the text portions of Web pages to be presented on cellular telephones and personal digital assistants (PDAs) via wireless access?

A. HDML
B. Wireless Markup Language
C. Both of the above
D. Neither of the above
Answer» D. Neither of the above
19.

Developed by International Telecommunication Union (ITU), ______ is a code-division multiple access (CDMA) version of the IMT-2000 standard.

A. CDMA
B. WCDMA
C. CMYK
D. CDMA2000
Answer» E.
20.

Which of the following is a faster version of GSM wireless service, designed to deliver data at rates up to 384 Kbps and enable the delivery of multimedia and other broadband applications to mobile phone and computer users?

A. ESMR
B. BREW
C. EDGE
D. ETRN
Answer» D. ETRN
21.

_________ is a security protocol designed to provide a wireless LAN with a level of security and privacy comparable to what is usually expected of a wired LAN.

A. WEP
B. 802.11x
C. RMON
D. LDAP
Answer» B. 802.11x
22.

In IEEE 802.11, a BSS without an AP is called an _________.

A. An ad hoc architecture
B. An infrastructure network
C. Either (a) or (b)
D. Neither (a) nor (b)
Answer» B. An infrastructure network
23.

In IEEE 802.11, a BSS with an AP is sometimes referred to as ____________.

A. An ad hoc architecture
B. An infrastructure network
C. Either (a) or (b)
D. neither (a) nor (b)
Answer» C. Either (a) or (b)
24.

In IEEE 802.11, communication between two stations in two different BSSs usually occurs via two ________.

A. BSSs
B. ESSs
C. APs
D. None of the above
Answer» D. None of the above
25.

In IEEE 802.11, a station with ________ mobility is either stationary (not moving) or moving only inside a BSS.

A. No-transition
B. BSS-transition
C. ESS-transition
D. None of the above
Answer» B. BSS-transition
26.

In IEEE 802.11, a station with ________mobility can move from one BSS to another, but the movement is confined inside one ESS.

A. No-transition
B. BSS-transition
C. ESS-transition
D. None of the above
Answer» C. ESS-transition
27.

In IEEE 802.11, a station with ________ mobility can move from one ESS to another.

A. No-transition
B. BSS-transition
C. ESS-transition
D. None of the above
Answer» D. None of the above
28.

In IEEE 802.11, _______ is an optional access method that can be implemented in an infrastructure network (not in an ad hoc network).

A. DCF
B. PCF
C. Either (a) or (b)
D. Neither (a) nor (b)
Answer» C. Either (a) or (b)
29.

The IEEE 802.11 standard for wireless LANs defines two services: ______ and _______.

A. BSS, ASS
B. ESS, SSS
C. BSS, ESS
D. BSS, DCF
Answer» D. BSS, DCF
30.

In IEEE 802.11, the access method used in the DCF sublayer is _________.

A. ALOHA
B. CSMA/CA
C. CSMA/CD
D. None of the above
Answer» C. CSMA/CD
31.

In IEEE 802.11, the ______ is a timer used for collision avoidance.

A. NAV
B. BSS
C. ESS
D. None of the above
Answer» B. BSS
32.

In IEEE 802.11, the addressing mechanism can include up to ______addresses.

A. Four
B. Five
C. Six
D. None of the above
Answer» B. Five
33.

The original IEEE 802.11, uses _________.

A. FHSS
B. DSSS
C. OFDM
D. Either (a) or (b)
Answer» E.
34.

IEEE 802.11a, has a data rate of _____Mbps.

A. 1
B. 2
C. 6
D. None of the above
Answer» D. None of the above
35.

The original IEEE 802.11, has a data rate of _____Mbps.

A. 1
B. 6
C. 11
D. 22
Answer» B. 6
36.

The IEEE 802.11b, uses _________.

A. FHSS
B. DSSS
C. OFDM
D. Either (a) or (b)
Answer» C. OFDM
37.

The IEEE 802.11a, uses _________.

A. FHSS
B. DSSS
C. OFDM
D. Either (a) or (b)
Answer» D. Either (a) or (b)
38.

The IEEE 802.11g, uses _________.

A. FHSS
B. DSSS
C. OFDM
D. Either (a) or (b)
Answer» D. Either (a) or (b)
39.

IEEE 802.11b, has a data rate of _____Mbps.

A. 1
B. 2
C. 5.5
D. None of the above
Answer» D. None of the above
40.

In IEEE 802.11 DSSS, infrared sequence is mapped into a

A. 12 Bit Sequence
B. 14 Bit Sequence
C. 16 Bit Sequence
D. 18 Bit Sequence
Answer» D. 18 Bit Sequence
41.

In wireless LAN, there are many hidden stations so we cannot detect the

A. Frames
B. Collision
C. Signal
D. Data
Answer» C. Signal
42.

In IEEE 802.11 frames, To DS and from DS define the value of the two flags in the

A. Sequence field
B. Data field
C. Frame control field
D. Duration field
Answer» D. Duration field
43.

The header of the baseband layer frame has three identical sections of

A. 12 Bits
B. 16 Bits
C. 18 Bits
D. 20 Bits
Answer» D. 20 Bits
44.

When a station is idle, it waits for the period of time is called

A. Distributed Interframe Space
B. Short Interframe Space
C. Request to sent
D. Clear to send
Answer» B. Short Interframe Space
45.

When we divide the band of Orthogonal Frequency Division Multiplexing (OFDM) into sub bands, it diminishes the effects of

A. Noise
B. Collision
C. Interference
D. Signals absence
Answer» D. Signals absence
46.

The baseband is roughly equivalent to the MAC sub layer in

A. WANs
B. LANs
C. MANs
D. Wi-Fi
Answer» C. MANs
47.

L2CAP have specific duty of

A. Multiplexing
B. Quality of service
C. Segmentation and reassembly
D. All of the above
Answer» E.
48.

The value of the frame body field of Media Access Control frame is in between

A. 0 and 512 bytes
B. 0 and 1214 bytes
C. 0 to 2312 bytes
D. 0 to 3450 bytes
Answer» D. 0 to 3450 bytes
49.

The duration field D of Media Access Control layer frame contains

A. 2bytes
B. 4 bytes
C. 6 bytes
D. 8 bytes
Answer» B. 4 bytes
50.

Bluetooth has used a sophisticated version of

A. CSK
B. FSK
C. TDMA
D. CDMA
Answer» C. TDMA