85 + Mcqs in Wireless LAN Mcqs Page 1 McqOptions

1.	The standard IEEE 802.11s uses
A.	OFDM
B.	DSSS
C.	FHSS
D.	DSDM
Answer» B. DSSS

Discussion

2.	In wireless network, an extended service set is a set of
A.	Connected basic service set
B.	All access point
C.	All stations
D.	None of the above
Answer» B. All access point

Discussion

3.	Which of the following is not used in WiMAX for communication?
A.	2.3 GHz
B.	2.4 GHz
C.	2.5 GHz
D.	3.5 GHz
Answer» C. 2.5 GHz

Discussion

4.	802.11 legacy specifies data rates of what?
A.	11 Mbps
B.	1 & 2 Mbps
C.	5 Mbps
D.	54 Mbps
Answer» C. 5 Mbps

Discussion

5.	What modulation technique does 802.11b wireless use?
A.	DSSS
B.	FDSS
C.	FMDS
D.	OFDM
Answer» B. FDSS

Discussion

6.	802.11g is downward compatible to what?
A.	802.11a
B.	802.11b
C.	802.11i
D.	802.11n
Answer» C. 802.11i

Discussion

7.	802.11i provides what?
A.	Quality of service
B.	Double the speed
C.	Additional security
D.	All of the above
Answer» D. All of the above

Discussion

8.	802.11a runs on what frequency?
A.	5Ghz
B.	2.4Ghz
C.	4.8Ghz
D.	3.6Ghz
Answer» B. 2.4Ghz

Discussion

9.	WEP stands for what?
A.	Wired equivalency protocol
B.	Wired equivalent privacy
C.	Wireless encryption protocol
D.	Wireless equivalent privacy
Answer» C. Wireless encryption protocol

Discussion

10.	802.11i is the same as what?
A.	WPA
B.	WEP
C.	802.11g
D.	WPA2
Answer» E.

Discussion

11.	WPA2 uses what, instead of RC4, used by WEP and WPA?
A.	AES
B.	RC4
C.	RC3
D.	3DES
Answer» B. RC4

Discussion

12.	802.11a offers greater speed than 802.11b but offers less _________.
A.	Speed
B.	Distance
C.	Channels
D.	Security
Answer» C. Channels

Discussion

13.	Which of the following refers to a standard or group of standards that are still being developed as a part of overall IEEE 802.11 WLAN support?
A.	802.11x
B.	802.11i
C.	Both of the above
D.	Neither of the above
Answer» D. Neither of the above

Discussion

14.	The Bluetooth network is called?
A.	Piconet
B.	Bluenet
C.	Sctternet
D.	Toothnet
Answer» B. Bluenet

Discussion

15.	The addressing scheme include up to _____addresses in IEEE 802.11.
A.	4
B.	5
C.	6
D.	None of the above
Answer» B. 5

Discussion

16.	What does BAHO stands for?
A.	Base station assisted handover
B.	Base assisted handover
C.	Base assistance handover
D.	None of the above
Answer» B. Base assisted handover

Discussion

17.	The core concept used in cellular technology is
A.	Frequency reuse
B.	Code reuse
C.	TDM
D.	Transmission power saving
Answer» B. Code reuse

Discussion

18.	Base station always requests channels from?
A.	MCS
B.	BCS
C.	MSC
D.	BSC
Answer» B. BCS

Discussion

19.	Uplinks are also knowns as
A.	Reverse link
B.	BS link
C.	Forward link
D.	MS link
Answer» B. BS link

Discussion

20.	What are the devices that provide connectivity to WiMAX network?
A.	Gateway
B.	Access point
C.	Subscriber stations
D.	Repeaters
Answer» D. Repeaters

Discussion

21.	What does WPA stands for?
A.	Wired protected access
B.	Wifi protected access
C.	Wireless protected access
D.	Wifi process access
Answer» D. Wifi process access

Discussion

22.	A wireless network interface can work in
A.	Infrastructure mode
B.	Ad hoc mode
C.	Both a and b
D.	None of the above
Answer» D. None of the above

Discussion

23.	The control frame that is sent by the destination station is called
A.	Clear to send
B.	Request to sent
C.	Distributed Interframe Space
D.	Short Interframe Space
Answer» B. Request to sent

Discussion

24.	The field retry means retransmitting frame when its value is set to
A.	0
B.	1
C.	-1
D.	Infinity
Answer» C. -1

Discussion

25.	IEEE 802.11 have three categories of
A.	Frames
B.	Fields
C.	Signals
D.	Sequences
Answer» B. Fields

Discussion

26.	The access method of baseband layer is
A.	FDMA
B.	TDMA
C.	FSK
D.	CDMA
Answer» C. FSK

Discussion

27.	A BSS without an AP is called an
A.	Adhoc network
B.	Infrastructure network
C.	Connectionless network
D.	Channelization network
Answer» B. Infrastructure network

Discussion

28.	Bluetooth defines several protocols for the upper layers that uses
A.	UDP
B.	L2CAP
C.	HSP
D.	ITP
Answer» C. HSP

Discussion

29.	Peripheral devices can communicate through a small network, known as
A.	Wireless Network
B.	Bluetooth Network
C.	Adhoc Network
D.	Piconet Network
Answer» C. Adhoc Network

Discussion

30.	In Point Coordination Function, PCF Interframe space (PIFS) is shorter than the
A.	RTS
B.	SIFS
C.	DIFS
D.	CTS
Answer» D. CTS

Discussion

31.	Bluetooth allows the station to define a quality of
A.	Time Level
B.	Service Level
C.	Data Level
D.	Segment Level
Answer» C. Data Level

Discussion

32.	ACL stands for
A.	Asynchronous Connectionless Link
B.	Asynchronous Connection Link
C.	Asynchronous Connected Link
D.	Asynchronous Communication Link
Answer» B. Asynchronous Connection Link

Discussion

33.	DCF stands for
A.	Direct Control Function
B.	Distributed Control Function
C.	Direct Cooperate Function
D.	Distributed Coordination Function
Answer» E.

Discussion

34.	Distributed Coordination Function (DCF) uses the mechanism of
A.	CSMA/CD
B.	CSMA/CA
C.	TDMA
D.	FDMA
Answer» C. TDMA

Discussion

35.	The current version in frame control field is
A.	0
B.	1
C.	2
D.	3
Answer» B. 1

Discussion

36.	Management frames, control frames and data frames are used by
A.	Wireless LANs
B.	Wireless MANs
C.	Wireless WANs
D.	None
Answer» B. Wireless MANs

Discussion

37.	If the value of sub field type is 1100 in control frames, then it contains the information of
A.	Request to send
B.	Clear to send
C.	Acknowledgement
D.	Sender
Answer» C. Acknowledgement

Discussion

38.	.. protocol is widely used on LAN in the MAC sub layer.
A.	CSMA
B.	TCP
C.	CSMA/CD
D.	GSM
Answer» D. GSM

Discussion

39.	In binary countdown protocol each station address bits are
A.	ANDed
B.	Ex - ORed
C.	ORed
D.	NORed
Answer» D. NORed

Discussion

40.	Multiple users share a common channel is called ..
A.	LAN
B.	WAN
C.	Contention
D.	CSMA/CD
Answer» D. CSMA/CD

Discussion

41.	. system is used for ground based radio broadcasting.
A.	Static channel allocation
B.	Dynamic channel allocation
C.	ALOHA
D.	CSMA
Answer» D. CSMA

Discussion

42.	Which IEEE 802 standard provides for a collision-free protocol?
A.	802.2
B.	892.3
C.	802.1
D.	802.5
Answer» E.

Discussion

43.	The first collision free protocol is .
A.	Binary countdown
B.	Basic bitmap
C.	Reservation protocol
D.	SAP
Answer» C. Reservation protocol

Discussion

44.	Military vehicles on a battlefield with no existing infrastructure will deploy network.
A.	MANET
B.	Cell Network
C.	LAN
D.	Wi-Fi
Answer» B. Cell Network

Discussion

45.	The frequency range of wireless LAN is
A.	900 MHz bands
B.	2GHz bands
C.	5 GHz bands
D.	All of these
Answer» E.

Discussion

46.	_______ are wireless network standard with a data rate of only 2 Mbps .
A.	IEEE 802.11a
B.	IEEE802.11b
C.	IEEE803.11a
D.	IEEE803.11b
Answer» B. IEEE802.11b

Discussion

47.	What is the type of network in which the topology change from time to time?
A.	Wi-Fi
B.	Cell Network
C.	LAN
D.	MANET
Answer» E.

Discussion

48.	The processes that keep track of all mobile hosts visiting the area is ..
A.	Home agent
B.	Mobile agent
C.	Foreign agent
D.	User agent
Answer» D. User agent

Discussion

49.	The hosts which are basically stationary hosts who move from one fixed site to another from time to time but use the network only when they are physically connected to it are called .
A.	Migratory hosts
B.	Stationary hosts
C.	Mobile hosts
D.	Random hosts
Answer» B. Stationary hosts

Discussion

50.	The hosts who compute on the run and want to maintain their connections as they move around
A.	Migratory hosts
B.	Stationary hosts
C.	Mobile hosts
D.	Random hosts
Answer» D. Random hosts

Discussion

Explore topic-wise MCQs in Computer Networks Mcqs.

The standard IEEE 802.11s uses

In wireless network, an extended service set is a set of

Which of the following is not used in WiMAX for communication?

802.11 legacy specifies data rates of what?

What modulation technique does 802.11b wireless use?

802.11g is downward compatible to what?

802.11i provides what?

802.11a runs on what frequency?

WEP stands for what?

802.11i is the same as what?

WPA2 uses what, instead of RC4, used by WEP and WPA?

802.11a offers greater speed than 802.11b but offers less _________.

Which of the following refers to a standard or group of standards that are still being developed as a part of overall IEEE 802.11 WLAN support?

The Bluetooth network is called?

The addressing scheme include up to _____addresses in IEEE 802.11.

What does BAHO stands for?

The core concept used in cellular technology is

Base station always requests channels from?

Uplinks are also knowns as

What are the devices that provide connectivity to WiMAX network?

What does WPA stands for?

A wireless network interface can work in

The control frame that is sent by the destination station is called

The field retry means retransmitting frame when its value is set to

IEEE 802.11 have three categories of

The access method of baseband layer is

A BSS without an AP is called an

Bluetooth defines several protocols for the upper layers that uses

Peripheral devices can communicate through a small network, known as

In Point Coordination Function, PCF Interframe space (PIFS) is shorter than the

Bluetooth allows the station to define a quality of

ACL stands for

DCF stands for

Distributed Coordination Function (DCF) uses the mechanism of

The current version in frame control field is

Management frames, control frames and data frames are used by

If the value of sub field type is 1100 in control frames, then it contains the information of

.. protocol is widely used on LAN in the MAC sub layer.

In binary countdown protocol each station address bits are

Multiple users share a common channel is called ..

. system is used for ground based radio broadcasting.

Which IEEE 802 standard provides for a collision-free protocol?

The first collision free protocol is .

Military vehicles on a battlefield with no existing infrastructure will deploy network.

The frequency range of wireless LAN is

_______ are wireless network standard with a data rate of only 2 Mbps .

What is the type of network in which the topology change from time to time?

The processes that keep track of all mobile hosts visiting the area is ..

The hosts which are basically stationary hosts who move from one fixed site to another from time to time but use the network only when they are physically connected to it are called .

The hosts who compute on the run and want to maintain their connections as they move around