MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 105 Mcqs, each offering curated multiple-choice questions to sharpen your Textile Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Packaging holding arm is made to effect an oscillating effect in |
| A. | vertical plane |
| B. | horizontal plane |
| C. | both a and b |
| D. | no plane |
| Answer» D. no plane | |
| 2. |
Tension in yarn is constantly monitored using |
| A. | electronic sensor |
| B. | tension sensor |
| C. | yarn strength sensor |
| D. | sensor monitor |
| Answer» B. tension sensor | |
| 3. |
For right weight packaging, winding machine can be fed by |
| A. | ring spun yarn bobbins |
| B. | packages |
| C. | cylindrical/conical packages |
| D. | all of above |
| Answer» E. | |
| 4. |
Packages can be divided into |
| A. | 2 shapes |
| B. | 3 shapes |
| C. | 4 shapes |
| D. | 5 shapes |
| Answer» C. 4 shapes | |
| 5. |
Winding machine have heads that are |
| A. | dependent |
| B. | independent |
| C. | round |
| D. | high speed |
| Answer» C. round | |
| 6. |
Yarn is wounded in parallel coil around |
| A. | 4 aprons |
| B. | 5 aprons |
| C. | 6 aprons |
| D. | 7 aprons |
| Answer» B. 5 aprons | |
| 7. |
Modern winding machine carries out operations |
| A. | package doffing |
| B. | Bobbin loading |
| C. | cone feeding |
| D. | all of above |
| Answer» E. | |
| 8. |
Bobbins are kept separate using |
| A. | separators |
| B. | identification tags |
| C. | identifiers |
| D. | categorizer |
| Answer» C. identifiers | |
| 9. |
An innovative splicing system is helpful in |
| A. | compacting yarn |
| B. | splicing yarn |
| C. | removing moisture |
| D. | removing impurities |
| Answer» B. splicing yarn | |
| 10. |
Retraction winding machine shrinks |
| A. | acrylic yarn |
| B. | cotton yarn |
| C. | nylon yarn |
| D. | all of above |
| Answer» B. cotton yarn | |
| 11. |
Splicing is done using |
| A. | air splicing |
| B. | twin splicer |
| C. | yarn splicer |
| D. | both a and b |
| Answer» E. | |
| 12. |
T weighing conveyor weighs wool at |
| A. | short interval |
| B. | regular interval |
| C. | short and regular interval |
| D. | short and irregular interval |
| Answer» D. short and irregular interval | |
| 13. |
As yarn leaves oven, it's tension is reduced by |
| A. | roller |
| B. | over feeder roller |
| C. | tension releaser |
| D. | tension roller |
| Answer» C. tension releaser | |
| 14. |
An innovative splicing system is |
| A. | splicer driven |
| B. | water and air driven |
| C. | heat driven |
| D. | weight driven |
| Answer» C. heat driven | |
| 15. |
Packaging holding arm is made to effect a/an |
| A. | Centripetal force |
| B. | centrifugal force |
| C. | oscillating movement |
| D. | rotatory movement |
| Answer» D. rotatory movement | |
| 16. |
Linking spinning frame with bobbin allows it to detect 2 different bobbins and keep them |
| A. | together |
| B. | separate |
| C. | joined |
| D. | linked |
| Answer» C. joined | |
| 17. |
Temperature of oven where retraction occurs is |
| A. | 200 degree |
| B. | 165 degree |
| C. | 265 degree |
| D. | 300 degree |
| Answer» C. 265 degree | |
| 18. |
Winding is created with large yarns and it can be |
| A. | wound |
| B. | unwound |
| C. | twisted |
| D. | all of above |
| Answer» C. twisted | |
| 19. |
Unwound yarn from package can be wounded evenly with help of |
| A. | grooved cylinder |
| B. | winding machine |
| C. | winding rotor |
| D. | control system |
| Answer» B. winding machine | |
| 20. |
Nowadays, twisters used are |
| A. | two for one twister |
| B. | one for two twister |
| C. | two for two twister |
| D. | two for three twister |
| Answer» B. one for two twister | |
| 21. |
2 yarns that are able to shrink perfectly and in ideal conditions are |
| A. | upper 2 aprons |
| B. | lower 2 aprons |
| C. | front aprons |
| D. | back apron |
| Answer» B. lower 2 aprons | |
| 22. |
Two for one twisting machine do not require |
| A. | control panel |
| B. | balloon limiter |
| C. | twist limiter |
| D. | control limiter |
| Answer» C. twist limiter | |
| 23. |
Retraction winding machine contains |
| A. | elastane |
| B. | propane |
| C. | chemicals |
| D. | acrylic |
| Answer» B. propane | |
| 24. |
In retraction winding machine, shrinking stage has |
| A. | 7 parts |
| B. | 5 parts |
| C. | 4 parts |
| D. | 3 parts |
| Answer» C. 4 parts | |
| 25. |
Join created from twin splicer is |
| A. | consistent |
| B. | stronger |
| C. | repeatable |
| D. | all of above |
| Answer» E. | |
| 26. |
Controlling tension keeps package density |
| A. | variable |
| B. | constant |
| C. | non constant |
| D. | low |
| Answer» C. non constant | |
| 27. |
Vertical and horizontal oscillating movement can be combined to respond to |
| A. | processing requirements |
| B. | moving requirements |
| C. | cleaning requirements |
| D. | winding requirements |
| Answer» B. moving requirements | |
| 28. |
Twisting is a process having |
| A. | 2 stages |
| B. | 3 stages |
| C. | 4 stages |
| D. | 5 stages |
| Answer» B. 3 stages | |
| 29. |
Winding machine have heads with |
| A. | non adjustable motors |
| B. | adjustable motors |
| C. | rotatory motors |
| D. | high speed motors |
| Answer» C. rotatory motors | |
| 30. |
Quantity of oil to be applied can be controlled using |
| A. | control panel |
| B. | quantity controller |
| C. | adjustment nut |
| D. | adjustment control |
| Answer» D. adjustment control | |
| 31. |
Winding defects occur due to |
| A. | irregular packaging |
| B. | impurities |
| C. | splicing |
| D. | ribboning |
| Answer» B. impurities | |
| 32. |
Yarn clearer clean yarn using |
| A. | set parameters |
| B. | evacuators |
| C. | clearers |
| D. | cleaning machines |
| Answer» B. evacuators | |
| 33. |
In winding, faults are eliminated using process called as |
| A. | elimination |
| B. | eliminating faults |
| C. | cleaning |
| D. | clearing |
| Answer» E. | |
| 34. |
Ring twisting machine is also called |
| A. | ring frame |
| B. | spinning frame |
| C. | Ring spinning frame |
| D. | twisting frame |
| Answer» D. twisting frame | |
| 35. |
Retraction winding machine has a maximum speed of |
| A. | 4000 m per min |
| B. | 5000 m per min |
| C. | 1000 m per min |
| D. | 2000 m per min |
| Answer» D. 2000 m per min | |
| 36. |
Yarn winding areas are suspended in air and heated by |
| A. | resistances |
| B. | air resistance |
| C. | electric resistance |
| D. | heat resistance |
| Answer» D. heat resistance | |
| 37. |
For proper functioning of two for one twisting machine, system that can be incorporated is |
| A. | optional electronic system |
| B. | electronic device |
| C. | controlling device |
| D. | electronic control |
| Answer» B. electronic device | |
| 38. |
Winding defect is avoided using |
| A. | anti winding |
| B. | defect machine |
| C. | ribboning |
| D. | clearing |
| Answer» D. clearing | |
| 39. |
Sensor for monitoring tension is controlled by |
| A. | computer |
| B. | sensor computer |
| C. | headstock computer |
| D. | sensor monitor |
| Answer» D. sensor monitor | |
| 40. |
Two for one twisting machine have spindles that depends upon gauges |
| A. | 16-360 |
| B. | 370-380 |
| C. | 385-450 |
| D. | 465-496 |
| Answer» B. 370-380 | |
| 41. |
Two twisting directions are |
| A. | S and Z type |
| B. | Z and N type |
| C. | N and S type |
| D. | N and N type |
| Answer» B. Z and N type | |
| 42. |
Clearing is done using an electronic device called as |
| A. | yarn cleaner |
| B. | yarn clearer |
| C. | yarn impurifier |
| D. | fault eliminator |
| Answer» C. yarn impurifier | |
| 43. |
In twisted fancy yarn, effect yarn provides |
| A. | strength |
| B. | desired design |
| C. | color |
| D. | support |
| Answer» C. color | |
| 44. |
Core, effect and binder functions can also be fulfilled with yarns |
| A. | greater than 3 |
| B. | less than 3 |
| C. | equal to 3 |
| D. | less than 9 |
| Answer» B. less than 3 | |
| 45. |
Twisted fancy yarn is made up of |
| A. | core and effect |
| B. | core, effect and binder yarn |
| C. | core and binder yarn |
| D. | binder yarn |
| Answer» C. core and binder yarn | |
| 46. |
Machine/s used in twisting of yarn is/are |
| A. | ring twisting frame |
| B. | hollow spindle twisting machine |
| C. | both a and b |
| D. | spindle machine |
| Answer» D. spindle machine | |
| 47. |
Two for one twisting machine is operationally flexible and works with balloons that are |
| A. | controlled |
| B. | free |
| C. | both a and b |
| D. | round |
| Answer» D. round | |
| 48. |
Feeding cylinder consists of a metal shaft with pressure cylinders to keep winding speed |
| A. | non constant |
| B. | constant |
| C. | high |
| D. | low |
| Answer» C. high | |
| 49. |
In two for one twisting machine, in addition to wax |
| A. | oil can be applied |
| B. | chemical can be applied |
| C. | thinner can be applied |
| D. | grease can be applied |
| Answer» B. chemical can be applied | |
| 50. |
Twisting direction is of |
| A. | 3 types |
| B. | 2 types |
| C. | 5 types |
| D. | 7 types |
| Answer» C. 5 types | |