 
			 
			MCQOPTIONS
 Saved Bookmarks
				This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Automobile Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. | What does the code 145 SR -13 tire designation represent? | 
| A. | 145 width, 13 diameter, cross-ply | 
| B. | 145 mm width, 13 diameter, radial-ply | 
| C. | 145 width, 13 cm diameter, radial-ply | 
| D. | 145 mm width, 13 cm diameter, cross-ply | 
| Answer» C. 145 width, 13 cm diameter, radial-ply | |
| 2. | A car is fitted with 6 * 14 wheels and 185/65 R 14 tires on them. What is the rolling radius of the original tire? | 
| A. | 398.05 mm | 
| B. | 298.05 mm | 
| C. | 288.05 mm | 
| D. | 278.05 mm | 
| Answer» C. 288.05 mm | |
| 3. | What is the purpose of tire rotation on automobiles? | 
| A. | Avoid ply separation | 
| B. | Equalize wear | 
| C. | Get better ride | 
| D. | Reduce bump | 
| Answer» C. Get better ride | |
| 4. | What do the permissible of mixing cross-ply and radial-ply automobile tires allow? | 
| A. | Cross-ply tires on left wheels | 
| B. | Cross-ply tires on right wheels | 
| C. | Cross-ply tires on front wheels | 
| D. | Cross-ply tires on rear wheels | 
| Answer» D. Cross-ply tires on rear wheels | |
| 5. | Where will an overinflated tire wear the thread most? | 
| A. | Near center | 
| B. | Near the edge | 
| C. | In the cross direction | 
| D. | In the lateral direction | 
| Answer» B. Near the edge | |
| 6. | Where will an underinflated tire wear the thread most? | 
| A. | Near center | 
| B. | Near the edge | 
| C. | In the cross direction | 
| D. | In the lateral direction | 
| Answer» C. In the cross direction | |
| 7. | What does the ply rating refer to? | 
| A. | Aspect ratio | 
| B. | Rated strength | 
| C. | Recommended inflation pressure | 
| D. | The actual number of plies | 
| Answer» C. Recommended inflation pressure | |
| 8. | In case of a wire wheel, the vehicle weight is supported by the wire in _________ | 
| A. | Tension | 
| B. | Bending | 
| C. | Shear | 
| D. | Compression | 
| Answer» B. Bending | |
| 9. | Which type of wheels is preferred in sports cars? | 
| A. | Disc wheel | 
| B. | Wire wheel | 
| C. | Magnesium alloy wheel | 
| D. | Aluminum alloy wheel | 
| Answer» D. Aluminum alloy wheel | |
| 10. | Which types of wheels cannot be used with a tubeless tire? | 
| A. | Disc wheel | 
| B. | Light alloy wheel | 
| C. | Wire wheel | 
| D. | Composite wheel | 
| Answer» D. Composite wheel | |