Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

The use of bore guide in under-reamed pile foundation is essential for __________

A. To drill the bore hole
B. To provide a support to the pile
C. To keep the bore holes vertical
D. To set the guide assembly in position
Answer» D. To set the guide assembly in position
2.

Which of the following stages are involved in the construction of under reamed piles?

A. Concreting of piles and Boring by auger
B. Concreting the funnel
C. None of the mentioned
D. All of the mentioned
Answer» B. Concreting the funnel
3.

The allowable load which the pile can carry safely is determined on the basis of ________

A. Factor of safety
B. Load test
C. Stability of the pile foundation
D. All of the mentioned
Answer» D. All of the mentioned
4.

The details of the depth of beam and reinforcement required for various loading is provided by_______

A. Indian standard code
B. Central Building Research Institute, Roorkee
C. M.I.T system
D. None of the mentioned
Answer» C. M.I.T system
5.

The piles that are suitable for end-bearing to friction friction-load carrying soils is _________

A. Swage piles
B. Union metal monotone piles
C. McArthur cased piles
D. Western button pile
Answer» C. McArthur cased piles
6.

The precast concrete piles are generally used for a maximum design load of about ____________

A. 50 tonnes
B. 100 tonnes
C. 75 tonnes
D. 80 tonnes
Answer» E.
7.

Cased cast-in-situ piles are suitable for _________ conditions.

A. Seasonal moisture change
B. Dry condition
C. All ground conditions
D. All of the mentioned
Answer» D. All of the mentioned
8.

Which of the following formulae can be used for determining the efficiency of pile group?

A. Dynamic formulae
B. Static formulae
C. Feld’s formulae
D. Hiley’s formulae
Answer» D. Hiley’s formulae
9.

The bearing capacity of a single pile in clay is mainly due to _________

A. Friction
B. Shear strength of soil
C. Allowable load
D. Ultimate load
Answer» B. Shear strength of soil
10.

Enlarging the stem of bore hole at the depth is done by using________

A. Spiral auger
B. Under-reamer
C. Boring guide
D. None of the mentioned
Answer» C. Boring guide
11.

In which of the following piles, alligator jaw point can be used?

A. Vibro-pile
B. Pedestal pile
C. Franki pile
D. Simplex pile
Answer» E.
12.

Which of the following piles is a cast-in-situ type of concrete pile?

A. Under-reamed pile
B. Raymond standard pile
C. Pressure pile
D. Anchor pile
Answer» C. Pressure pile
13.

Bored compaction piles are the modification of __________

A. Composite piles
B. End bearing piles
C. Compaction piles
D. Under-reamed piles
Answer» D. Under-reamed piles
14.

In Franki pile foundation, the bottom of the pile is provided in the shape of _________

A. Spherical
B. Mush-room
C. Cone
D. Rectangular
Answer» C. Cone
15.

An advantage of preferring bored piles is _______

A. The concrete is not liable to damage
B. Vibration caused by driving can be avoided
C. They need no storage space
D. No requirement of special handling equipment
Answer» C. They need no storage space
16.

The diameter of the under-reamed pile is kept equal to _______ times the diameter of pile steam.

A. 4
B. 5
C. 2.5
D. 2
Answer» D. 2
17.

The elastic compression Δ L of a pile can be calculated by the expression based on ___________

A. Terzaghi’s theory
B. Hooke’s law
C. Meyerhof’s theory
D. Hiley’s formula
Answer» C. Meyerhof’s theory
18.

The efficiency of pile group depends upon __________

A. Characteristic of pile and Spacing of pile
B. Bearing capacity of soil
C. All of the mentioned
D. None of the mentioned
Answer» B. Bearing capacity of soil
19.

One of the main advantages of using cased piles are _________

A. On-the-job-length flexibility and Internal inspection after being driven
B. Protect concrete fillings
C. None of the mentioned
D. All of the mentioned
Answer» B. Protect concrete fillings
20.

The depth of the bore hole is checked at _________ before insertion of the under-reamer.

A. At the start and At the end
B. Each time
C. None of the mentioned
D. All of the mentioned
Answer» B. Each time
21.

In pressure pile, the frictional resistance is increased by __________

A. Compression of soil and Rough irregular surface
B. Bearing capacity
C. None of the mentioned
D. All of the mentioned
Answer» B. Bearing capacity
22.

Western button bottom piles uses ________ for driving.

A. Concrete plug
B. Auger
C. Conical shoe
D. Under-reamer
Answer» B. Auger
23.

Franki piles are best suited for _________ type of soil.

A. Cohesive soil
B. Clay
C. Granular soil
D. Cohesion less soil
Answer» D. Cohesion less soil
24.

The separation of Q at any stage of loading into Rp and Rf in cyclic test is based on experimental value found out by________

A. Hailey
B. A.F. Van Weele
C. A.M. Wellington
D. MacArthur
Answer» C. A.M. Wellington
25.

The allowable load for the pile is given by __________ equation.

A. Qa = Qup/ F
B. Qa = Qup× F
C. Qa = WH /F(S+C)
D. Qa = WH /6(S+2.5)
Answer» B. Qa = Qup× F
26.

Which of the following is an advantage of using uncased cast-in-situ piles?

A. They need no storage place
B. The concrete cannot be damaged by driving
C. Special equipment is not required
D. All of the mentioned
Answer» E.
27.

For completion of one under-ream, how many buckets of earth are required for removal?

A. Five
B. Ten
C. Eight
D. Three
Answer» D. Three
28.

Single acting hammers provide an advantage in __________ type of soil.

A. Compact soil and Hard soil
B. Light weight soil
C. None of the mentioned
D. All of the mentioned
Answer» B. Light weight soil
29.

The pile load test should be performed on __________

A. Working pile
B. Test pile
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
30.

The maximum load which can be carried by a pile is defined as its __________

A. Ultimate load carrying capacity
B. Ultimate bearing resistance
C. Ultimate bearing capacity
D. All of the mentioned
Answer» E.
31.

The load carrying capacity of a under-reamed pile may be determined by _________

A. Safe load test
B. Penetration test
C. Pile load test
D. Cyclic load test
Answer» B. Penetration test
32.

The under-reamed piles are connected by a beam known as ___________

A. Capping beam and Grade beam
B. Reamed beam
C. None of the mentioned
D. All of the mentioned
Answer» B. Reamed beam
33.

Under reamed piles are normally bored _________ piles.

A. Cast-in-situ piles
B. Pre-cast-piles
C. Steel piles
D. Composite piles
Answer» B. Pre-cast-piles
34.

The maximum spacing of the under-reamed pile should not normally exceed __________

A. 2 meters
B. 2½ meters
C. 1.5 meters
D. 30 centimeters
Answer» C. 1.5 meters
35.

The piles that are used for protecting structures from ships and floating object is ____________

A. Anchor piles
B. Fender piles
C. Compaction piles
D. Batter piles
Answer» D. Batter piles
36.

The art of driving piles into the ground was first established by __________

A. Greeks
B. Romans
C. Philippians
D. None of the mentioned
Answer» C. Philippians
37.

Which of the following piles is used to compact loose granular soil?

A. Friction piles
B. End bearing piles
C. Compaction piles
D. Tension piles
Answer» D. Tension piles
38.

Based on the function, piles can be classified into ___________ types.

A. 4
B. 6
C. 8
D. 3
Answer» D. 3
39.

Sheet piles are commonly used as __________ in hydraulic structure.

A. Bulk heads
B. Bearing stratum
C. Boulders
D. Composite piles
Answer» B. Bearing stratum
40.

THE_GRADE_BEAMS_ARE_DESIGNED_FOR_A_MAXIMUM_BENDING_MOMENT_OF__________IF_THE_BEAMS_ARE_SUPPORTED.?$

A. (wL2)/50
B. (wL2)/30
C. (wL2)
D. None of the mentioned
Answer» B. (wL2)/30
41.

The_details_of_the_depth_of_beam_and_reinforcement_required_for_various_loading_is_provided_by_______$

A. Indian standard code
B. Central Building Research Institute, Roorkee
C. M.I.T system
D. None of the mentioned
Answer» C. M.I.T system
42.

The spacing of the piles in under-reamed pile foundation depends on which of the following factor?

A. Nature of the ground and Type of pile
B. Load acting on the pile
C. None of the mentioned
D. All of the mentioned
Answer» B. Load acting on the pile
43.

Under reamed piles are normally bored_________ piles.

A. Cast-in-situ piles
B. Pre-cast-piles
C. Steel piles
D. Composite piles
Answer» B. Pre-cast-piles
44.

The maximum spacing of the under-reamed pile should not normally exceed__________

A. 2 meters
B. 2¬Ω meters
C. 1.5 meters
D. 30 centimeters
Answer» C. 1.5 meters
45.

The under-reamed piles are connected by a beam known as___________

A. Capping beam and Grade beam
B. Reamed beam
C. None of the mentioned
D. All of the mentioned
Answer» B. Reamed beam
46.

The load carrying capacity of a under-reamed pile may be determined by_________

A. Safe load test
B. Penetration test
C. Pile load test
D. Cyclic load test
Answer» B. Penetration test
47.

Under-reamed pile foundation is most suitable for___________ type of condition.

A. Seasonal moisture change
B. Dry conditioned soil
C. Cohesive type of soil
D. All of the mentioned
Answer» B. Dry conditioned soil
48.

The diameter of the under-reamed pile is kept equal to_______ times the diameter of pile steam.

A. 4
B. 5
C. 2.5
D. 2
Answer» D. 2
49.

When the under-reamed pile has only one bulb, it is called_________

A. Multi-under reamed pile
B. Single-under reamed pile
C. Unique-under reamed pile
D. All of the mentioned
Answer» C. Unique-under reamed pile