MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 11 Mcqs, each offering curated multiple-choice questions to sharpen your Structural Analysis knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
What will be the velocity pressure at a height of 80ft. if k80 = 0.5, k80t = 1.2, kd = 1.3, V = 120mph and I = 1.67? |
| A. | 45.019 |
| B. | 46.019 |
| C. | 47.019 |
| D. | 48.019 |
| Answer» E. | |
| 2. |
What will be the wind pressure (ps) if adjustment factor ( ) is 2, importance factor is 5, while ps30 is 80N/m2? |
| A. | 600 N/m<sup>2</sup> |
| B. | 700 N/m<sup>2</sup> |
| C. | 800 N/m<sup>2</sup> |
| D. | 900 N/m<sup>2</sup> |
| Answer» D. 900 N/m<sup>2</sup> | |
| 3. |
In which of the following cases is ASCE procedure not applied? |
| A. | Enclosed structure |
| B. | Regular shape grid |
| C. | High rise structure |
| D. | Roof with 60 ft. height |
| Answer» D. Roof with 60 ft. height | |
| 4. |
In which type of roofs are scuppers used? |
| A. | Large area |
| B. | Small area |
| C. | Large width |
| D. | Small width |
| Answer» B. Small area | |
| 5. |
What is the value of average wind pressure (in psf) for height more than 100ft which is generally adopted? |
| A. | 10 |
| B. | 20 |
| C. | 30 |
| D. | 40 |
| Answer» D. 40 | |
| 6. |
What will be the flow rate (in gallons per minute) if A is 10 ft2 and rainfall intensity is 2 inches per hour? |
| A. | 0.208 |
| B. | 0.0208 |
| C. | 2.08 |
| D. | 20.8 |
| Answer» B. 0.0208 | |
| 7. |
Which out of the following is the static head? |
| A. | d<sub>s</sub> |
| B. | d<sub>h</sub> |
| C. | d<sub>s</sub> + d<sub>h</sub> |
| D. | d<sub>s</sub> d<sub>h</sub> |
| Answer» B. d<sub>h</sub> | |
| 8. |
What will be the rain load (in psf) if ds is 2 inches and dh is 1 inches? |
| A. | 5.2 |
| B. | 10.4 |
| C. | 15.6 |
| D. | 20.8 |
| Answer» D. 20.8 | |
| 9. |
Which type of drainage system will collect the rainwater? |
| A. | Primary |
| B. | Secondary |
| C. | Tertiary |
| D. | Primary and tertiary |
| Answer» B. Secondary | |
| 10. |
What will be the value of reduction factor R1 if value of At is given to be 500ft2 |
| A. | 0.5 |
| B. | 0.6 |
| C. | 0.7 |
| D. | 0.8 |
| Answer» D. 0.8 | |
| 11. |
Find the value of reduction factor R2 if F (rise to span ratio in inches) is given to be 5. |
| A. | 0.95 |
| B. | 0.96 |
| C. | 0.97 |
| D. | 0.98 |
| Answer» B. 0.96 | |