Explore topic-wise MCQs in Electrical Engineering.

This section includes 517 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering knowledge and support exam preparation. Choose a topic below to get started.

1.

When the excitation of an unloaded salient pole synchronous motor suddenly gets disconnected

A. the motor stops
B. it runs as a reluctance motor at the same speed
C. it runs as a reluctance motor at a lower speed
D. none of the above
Answer» B. it runs as a reluctance motor at the same speed
2.

A synchronous motor is running on a load with normal excitation. Now if the load on the motor is increased

A. power factor as well as armature current will decrease
B. power factor as well as armature current will increase
C. power factor will increase but armature current will decrease
D. power factor will decrease and armature current will increase
Answer» E.
3.

The power developed by a synchronous motor will be maximum when the load angle is

A. zero
B. 45
C. 90
D. 120
Answer» D. 120
4.

When V is the applied voltage, then the breakdown torque of a synchronous motor varies as

A. V
B. V312
C. V2
D. 1/V
Answer» B. V312
5.

The maximum value of torque that a synchronous motor can develop without losing its synchronism, is known as

A. slip torque
B. pull-out torque
C. breaking torque
D. synchronising torque
Answer» E.
6.

Which of the following losses is not dissipated by the stator core surface in a synchronous motor ?

A. Eddy current losses in the conductors
B. Iron losses in the stator
C. Copper losses in the slot portion of the conductors
D. Windage losses
Answer» E.
7.

If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will

A. stop
B. run as induction motor
C. function as static condenser
D. burn with dense smoke
Answer» B. run as induction motor
8.

The maximum torque which a synchronous motor will develop at rest for any angular position of the rotor, at rated stator supply voltage and frequency, is known as

A. locked-rotor torque
B. synchronous torque
C. pull up torque
D. reluctance torque
Answer» B. synchronous torque
9.

The coupling angle or load angle of synchronous motor is defined as the angle between the

A. rotor and stator teeth
B. rotor and the stator poles of opposite polarity
C. rotor and the stator poles of the same polarity
D. none of the above
Answer» C. rotor and the stator poles of the same polarity
10.

A synchronous motor which works on a leading power factor and does not drive a mechanical load is called as

A. static condenser
B. condenser
C. synchronous condenser
D. none of the above
Answer» D. none of the above
11.

The effect of increasing the load on a synchronous motor running with normal excitation is to

A. decrease both armature current and power factor
B. decrease armature current but increase power factor
C. increase armature current but decrease power factor
D. increase both its armature current and power factor
Answer» D. increase both its armature current and power factor
12.

A 3-phase synchronous motor is running clockwise. If the direction of its field current is reversed

A. the motor will stop
B. the motor continue to run in the same direction
C. the winding of the motor will burn
D. the motor will run in the reverse direction
Answer» C. the winding of the motor will burn
13.

By which of the following methods the constant speed of a synchronous motor can be changed to new fixed value ?

A. By changing the supply frequency
B. By interchanging any two phases
C. By changing the applied voltage
D. By changing the load.
Answer» B. By interchanging any two phases
14.

In a 3-phase, 4-pole, 50 Hz synchronous motor, the frequency, pole number and load torque all are halved. The motor speed will be

A. 3000 r.p.m.
B. 1500 r.p.m.
C. 750 r.p.m.
D. none of the above
Answer» C. 750 r.p.m.
15.

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because

A. synchronous motor has no slip
B. stator supply is not required to produce magnetic field
C. mechanical load on the rotor remains constant
D. synchronous motor has large airgap
Answer» C. mechanical load on the rotor remains constant
16.

An important advantage of a synchronous motor over wound round induction motor is that

A. its power factor may be varied at will
B. its speed is independent of supply frequency
C. its speed may be controlled more easily
D. none of the above
Answer» B. its speed is independent of supply frequency
17.

In a synchronous motor running with fixed excitation, when the load is increased three times, its torque angle becomes approximately

A. one-third
B. twice
C. thrice
D. six times
Answer» D. six times
18.

The mechanical displacement of the rotor with respect to the stator, in polyphase multipolar synchronous motors running at full load, is of the order of

A. zero degree
B. two degrees
C. five degrees
D. ten degrees
Answer» D. ten degrees
19.

If in a synchronous motor, driving mechanical load and drawing current at lagging power factor from constant voltage supply, its field excitation is increased, then its power factor

A. become more
B. become less
C. remain constant
D. none of the above
Answer» C. remain constant
20.

When a 3-phase synchronous generator is supplying a zero power factor lagging load, the armature field affects the main field in the following way

A. augments it directly
B. directly opposes it
C. cross-magnetises it
D. none of the above
Answer» C. cross-magnetises it
21.

If excitation of a synchronous motor running with a constant load is decreased from its normal value, ignoring effects of armature reaction, it leads to

A. increase in both armature current and power factor angle
B. increase in back e.m.f. but decrease in armature current
C. increase in both armature current and power factor which is lagging
D. increase in torque angle but decrease in back e.m.f.
Answer» B. increase in back e.m.f. but decrease in armature current
22.

When the voltage applied to a synchronous motor is increased, which of the following will reduce ?

A. Stator flux
B. Pull in torque
C. Both (a) and (b)
D. None of the above
Answer» E.
23.

A synchronous motor running with normal excitation adjusts to load increases essentially by increase in

A. back e.m.f.
B. armature current
C. power factor
D. torque angle
Answer» C. power factor
24.

When the stator windings are connected in such a fashion that the number of poles are made half, the speed of the rotor of a synchronous motor

A. remains same as the original value
B. decreases to half the original value
C. tends to becomes zero
D. increases to two times the original value
Answer» E.
25.

When load on an over-excited or under excited synchronous*motor is increased, rate of change of its armature current as compared with that of power factor is

A. more
B. less
C. equal
D. twice
Answer» C. equal
26.

While starting a synchronous motor by induction motor action, field winding is usually

A. connected to D.C. supply
B. short-circuited by low resistance
C. kept open-circuited
D. none of the above
Answer» C. kept open-circuited
27.

In a synchronous motor it the back e.m.f. generated in the armature at noload is approximately equal to the applied voltage, then

A. the motor is said to be fully loaded
B. the torque generated is maximum
C. the excitation is said to be zero per cent
D. the excitation is said to be hundred per cent
Answer» E.
28.

As the load is applied to a synchronous motor, the motor takes more armature current because

A. the increased load has to take more current
B. the rotor by shifting its phase backward causes motor to take more current
C. the back e.m.f. decreases causing an increase in motor current
D. the rotor strengthens the rotating field casuing more motor current
Answer» C. the back e.m.f. decreases causing an increase in motor current
29.

If load (or torque) angle of a 4-pole synchronous motor is 6 electrical, its value in mechanical degrees is

A. 2
B. 3
C. 4
D. 6
Answer» C. 4
30.

When V is the applied voltage, then the breakdown torque of a synchronous motorvaries as

A. V
B. V312
C. V2
D. 1/V
Answer» B. V312
31.

The power developed by a synchronous motor will be maximum when the load angleis

A. zero
B. 45°
C. 90°
D. 120°
Answer» D. 120°
32.

The maximum value of torque that a synchronous motor can develop without losingits synchronism, is known as

A. slip torque
B. pull-out torque
C. breaking torque
D. synchronising torque
Answer» E.
33.

By which of the following methods the constant speed of a synchronous motor can bechanged to new fixed value ?

A. By changing the supply frequency
B. By interchanging any two phases
C. By changing the applied voltage
D. By changing the load.
Answer» B. By interchanging any two phases
34.

The coupling angle or load angle of synchronous motor is defined as the anglebetween the

A. rotor and stator teeth
B. rotor and the stator poles of opposite polarity
C. rotor and the stator poles of the same polarity
D. none of the above
Answer» C. rotor and the stator poles of the same polarity
35.

When the voltage applied to a synchronous motor is increased, which of the followingwill reduce ?

A. Stator flux
B. Pull in torque
C. Both (a) and (b)
D. None of the above
Answer» E.
36.

If in a synchronous motor, driving mechanical load and drawing current at laggingpower factor from constant voltage supply, its field excitation is increased, then its power factor

A. become more
B. become less
C. remain constant
D. none of the above
Answer» C. remain constant
37.

In a synchronous motor it the back e.m.f. generated in the armature at noload isapproximately equal to the applied voltage, then

A. the motor is said to be fully loaded
B. the torque generated is maximum
C. the excitation is said to be zero per cent
D. the excitation is said to be hundred per cent
Answer» E.
38.

A synchronous motor is running on a load with normal excitation. Now if the load onthe motor is increased

A. power factor as well as armature current will decrease
B. power factor as well as armature current will increase
C. power factor will increase but armature current will decrease
D. power factor will decrease and armature current will increase
Answer» E.
39.

Due to which of the following reasons a synchronous motor fails to pull into synchronism after applying D.C. field current ?

A. High field current
B. Low short circuit ratio
C. High core losses
D. Low field current
Answer» E.
40.

If excitation of a synchronous motor running with a constant load is decreased fromits normal value, ignoring effects of armature reaction, it leads to

A. increase in both armature current and power factor angle
B. increase in back e.m.f. but decrease in armature current
C. increase in both armature current and power factor which is lagging
D. increase in torque angle but decrease in back e.m.f.
Answer» B. increase in back e.m.f. but decrease in armature current
41.

In a 3-phase, 4-pole, 50 Hz synchronous motor, the frequency, pole number and loadtorque all are halved. The motor speed will be

A. 3000 r.p.m.
B. 1500 r.p.m.
C. 750 r.p.m.
D. none of the above
Answer» C. 750 r.p.m.
42.

The maximum torque which a synchronous motor will develop at rest for anyangular position of the rotor, at rated stator supply voltage and frequency, is known as

A. locked-rotor torque
B. synchronous torque
C. pull up torque
D. reluctance torque
Answer» B. synchronous torque
43.

A synchronous motor running with normal excitation adjusts to load increasesessentially by increase in

A. back e.m.f.
B. armature current
C. power factor
D. torque angle
Answer» C. power factor
44.

If the field winding of an unloaded salient pole synchronous motor is open circuited,the motor will

A. stop
B. run as induction motor
C. function as static condenser
D. burn with dense smoke
Answer» B. run as induction motor
45.

The effect of increasing the load on a synchronous motor running with normalexcitation is to

A. decrease both armature current and power factor
B. decrease armature current but increase power factor
C. increase armature current but decrease power factor
D. increase both its armature current and power factor
Answer» D. increase both its armature current and power factor
46.

An important advantage of a synchronous motor over wound round induction motoris that

A. its power factor may be varied at will
B. its speed is independent of supply frequency
C. its speed may be controlled more easily
D. none of the above
Answer» B. its speed is independent of supply frequency
47.

A 3-phase synchronous motor is running clockwise. If the direction of its field currentis reversed

A. the motor will stop
B. the motor continue to run in the same direction
C. the winding of the motor will burn
D. the motor will run in the reverse direction
Answer» C. the winding of the motor will burn
48.

When the stator windings are connected in such a fashion that the number of polesare made half, the speed of the rotor of a synchronous motor

A. remains same as the original value
B. decreases to half the original value
C. tends to becomes zero
D. increases to two times the original value
Answer» E.
49.

A synchronous motor has better power factor as compared to that of an equivalentinduction motor. This is mainly because

A. synchronous motor has no slip
B. stator supply is not required to produce magnetic field
C. mechanical load on the rotor remains constant
D. synchronous motor has large airgap
Answer» C. mechanical load on the rotor remains constant
50.

The mechanical displacement of the rotor with respect to the stator, in polyphasemultipolar synchronous motors running at full load, is of the order of

A. zero degree
B. two degrees
C. five degrees
D. ten degrees
Answer» D. ten degrees