MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 181 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Science knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the level carries out goal, objective, work tasks, work products and other activities of the software process? |
| A. | Performed |
| B. | INCOMPLETE |
| C. | Optimized |
| D. | Quantitatively Managed |
| Answer» B. INCOMPLETE | |
| 2. |
Which of these activities is not one of the activities recommended to be performed by an independent SQA group? |
| A. | Serve as the sole test team for any software produced. |
| B. | The tools and methods that support SQA actions and tasks. |
| C. | Software configuration management procedures. |
| D. | Organizational roles and responsibilities relative to product quality. |
| Answer» B. The tools and methods that support SQA actions and tasks. | |
| 3. |
Which plan describes how the skills and experience of the project team members will be developed ? |
| A. | HR Plan |
| B. | Manager Plan |
| C. | Team Plan |
| D. | Staff Development Plan |
| Answer» E. | |
| 4. |
Which risk gives the degree of uncertainty and the project schedule will be maintained so that the product will be delivered in time? |
| A. | Business risk |
| B. | Technical risk |
| C. | Schedule risk |
| D. | Project risk |
| Answer» D. Project risk | |
| 5. |
Which risks identify Potential Design, Implementation, Interface, Verification and Maintenance Problems? |
| A. | Project risk |
| B. | Business risk |
| C. | Technical risk |
| D. | Schedule risk |
| Answer» D. Schedule risk | |
| 6. |
Which software designers tool helps to design the block structure of the software, that may further be broken down into smaller modules using refinement techniques? |
| A. | Analysis tools |
| B. | Design tools |
| C. | Configuration management tools |
| D. | Documentation tools |
| Answer» C. Configuration management tools | |
| 7. |
Which software enables the program to adequately manipulate information? |
| A. | Instructions |
| B. | Data Structures |
| C. | Documents |
| D. | All of the above |
| Answer» C. Documents | |
| 8. |
Which software works strictly according to defined specifications and solutions? |
| A. | Static-type |
| B. | Practical-type |
| C. | Embedded-type |
| D. | None of the above |
| Answer» B. Practical-type | |
| 9. |
Which subsystem implements a repository that encompasses the following elements, 1) Content database 2) Database capabilities 3) Configuration management functions |
| A. | The publishing subsystem |
| B. | The management subsystem |
| C. | The collection subsystem |
| D. | None of the above |
| Answer» C. The collection subsystem | |
| 10. |
Which type of DFD concentrates on the system process and flow of data in the system? |
| A. | Logical DFD |
| B. | Physical DFD |
| C. | Both A & B |
| D. | None of the above |
| Answer» B. Physical DFD | |
| 11. |
Which type of DFD shows how the data flow is actually implemented in the system and it is also more specific and close to the implementation? |
| A. | Logical DFD |
| B. | Physical DFD |
| C. | Both A & B |
| D. | None of the above |
| Answer» C. Both A & B | |
| 12. |
You are working in CareerRide as a project manager. Company wants to develop a project. You are also involved in planning team. What will be your first step in project planning? |
| A. | Establish the objectives and scope of the product. |
| B. | Determine the project constraints. |
| C. | Select the team. |
| D. | None of the above. |
| Answer» B. Determine the project constraints. | |
| 13. |
You are working in CareerRide as a project manager. What will you do to minimize the risk of software failure? |
| A. | Request a large budget |
| B. | You will increase the team size |
| C. | Track progress |
| D. | None of the above. |
| Answer» D. None of the above. | |
| 14. |
Which of the following is not a section in the standard for SQA plans recommended by IEEE? |
| A. | Budget |
| B. | Time |
| C. | People |
| D. | None of the above |
| Answer» B. Time | |
| 15. |
Which model gives the overall reliability of the system that is projected and certified? |
| A. | Sampling model |
| B. | Component model |
| C. | Certification model |
| D. | Both A & B |
| Answer» D. Both A & B | |
| 16. |
Which metrics are derived by normalizing quality and/or productivity measures by considering the size of the software that has been produced? |
| A. | Size oriented |
| B. | Function-Oriented |
| C. | Object-Oriented |
| D. | Use-case-Oriented |
| Answer» B. Function-Oriented | |
| 17. |
Which may be estimated either in terms of KLOC (Kilo Line of Code) or by calculating number of function points in the software? |
| A. | Time estimation |
| B. | Effort estimation |
| C. | Cost estimation |
| D. | Software size estimation |
| Answer» E. | |
| 18. |
Which is the way where the CMMI process meta model can be represented? |
| A. | A continuous model |
| B. | A staged model |
| C. | Both A & B |
| D. | None of the above |
| Answer» D. None of the above | |
| 19. |
Which is the most important feature of spiral model? |
| A. | Quality management |
| B. | Risk management |
| C. | Performance management |
| D. | Efficiency management |
| Answer» C. Performance management | |
| 20. |
Which is the Layered Technology in Bedrock that supports Software Engineering? |
| A. | Methods |
| B. | Tools |
| C. | Process |
| D. | Quality Focus |
| Answer» E. | |
| 21. |
Which is the Estimation Software size should be known? |
| A. | Time estimation |
| B. | Effort estimation |
| C. | Cost estimation |
| D. | Software size estimation |
| Answer» C. Cost estimation | |
| 22. |
Which is the degree where the software performs its required function? |
| A. | Correctness |
| B. | Clarity |
| C. | Completeness |
| D. | Consistency |
| Answer» B. Clarity | |
| 23. |
Which is the characteristics of Software risk? |
| A. | Uncertainty |
| B. | Loss |
| C. | Both A & B |
| D. | None of the above |
| Answer» D. None of the above | |
| 24. |
Which is not a broad categories that can be used to classify the operations? |
| A. | Transformers |
| B. | Operations |
| C. | Entities |
| D. | Attributes |
| Answer» B. Operations | |
| 25. |
Which is a logical grouping of data that resides within the application’s boundary and it is maintained via external inputs? |
| A. | Number of external interface files |
| B. | Number of internal logical files |
| C. | Number of external inquiries |
| D. | Number of external inputs |
| Answer» C. Number of external inquiries | |
| 26. |
Which feature relieves anxiety, so the user knows that errors can be undone? |
| A. | Support internal locus of control |
| B. | Permit easy reversal of actions |
| C. | Offer simple error handling |
| D. | Design dialog to yield closure |
| Answer» C. Offer simple error handling | |
| 27. |
Which factors affect the probable consequences if a risk occur? |
| A. | Risk avoidance |
| B. | Risk monitoring |
| C. | Risk timing |
| D. | Contingency planning |
| Answer» D. Contingency planning | |
| 28. |
Which design identifies the software as a system with many components interacting with each other? |
| A. | Architectural design |
| B. | High-level design |
| C. | Detailed design |
| D. | Both B & C |
| Answer» B. High-level design | |
| 29. |
Which depicts flow of control in program modules? |
| A. | Flowchart |
| B. | DFD |
| C. | Both A & B |
| D. | None of the above |
| Answer» B. DFD | |
| 30. |
Which core steps are defined by six sigma methodology? |
| A. | Analyze |
| B. | Define |
| C. | Measure |
| D. | All mentioned above |
| Answer» E. | |
| 31. |
Which classes implements the lower-level business abstractions that required to fully manage the business domain classes? |
| A. | User interface classes |
| B. | Business domain classes |
| C. | Process classes |
| D. | System classes |
| Answer» D. System classes | |
| 32. |
Which class gives a content or function change that corrects an error or enhances local content or functionality in change management? |
| A. | Class 1 |
| B. | Class 2 |
| C. | Class 3 |
| D. | Class 4 |
| Answer» B. Class 2 | |
| 33. |
Which Chart is a statistical technique to assess, monitor, and maintain the stability of a process? |
| A. | Control Chart |
| B. | Maintenance Chart |
| C. | Bar Charts |
| D. | None of these |
| Answer» B. Maintenance Chart | |
| 34. |
When multiple modules have read and write access to some global data, it is called, ________ . |
| A. | Content coupling |
| B. | Stamp coupling |
| C. | Data coupling |
| D. | Common coupling |
| Answer» E. | |
| 35. |
What should they focus on consequences that affect on the Software Risk Impact Assessment? |
| A. | Performance |
| B. | Support and cost |
| C. | Schedule |
| D. | All mentioned above |
| Answer» E. | |
| 36. |
What should a software team apply for limited resources in a way that has the highest likelihood of achieving a high-quality result? |
| A. | Requirement quality |
| B. | Design quality |
| C. | Code quality |
| D. | Quality control effectiveness |
| Answer» E. | |
| 37. |
What is the software component repository is referred by designers to search for the matching component on the basis of functionality and intended software requirements? |
| A. | Search suitable components |
| B. | Specify components |
| C. | Requirement specification |
| D. | Incorporate components |
| Answer» B. Specify components | |
| 38. |
What is the project and process level that provides the Quality Metric benefit? |
| A. | Defect amplification |
| B. | Defect removal efficiency |
| C. | Measuring quality |
| D. | All mentioned above |
| Answer» C. Measuring quality | |
| 39. |
What is the level of metrics and indicators that are available to measure the process and quality? |
| A. | Optimized |
| B. | Defined |
| C. | Quantitatively Managed |
| D. | Managed |
| Answer» D. Managed | |
| 40. |
What is the designers may like to have list of all functional and non-functional requirements of GUI that can be taken from user and their existing software solution? |
| A. | User analysis |
| B. | Task analysis |
| C. | GUI requirement gathering |
| D. | GUI design & implementation |
| Answer» D. GUI design & implementation | |
| 41. |
What is the correctness, completeness, and consistency of the requirements model will have a strong influence on the quality of all work products that follow? |
| A. | Requirement quality |
| B. | Design quality |
| C. | Code quality |
| D. | Quality control effectiveness |
| Answer» B. Design quality | |
| 42. |
What is tested to uncover errors that indicate lack of conformance to customer requirements in the dimensions of quality? |
| A. | Structure |
| B. | Function |
| C. | Usability |
| D. | Navigation |
| Answer» C. Usability | |
| 43. |
What is described by means of DFDs as studied earlier and represented in algebraic form? |
| A. | Data flow |
| B. | Data storage |
| C. | Data Structures |
| D. | Data elements |
| Answer» B. Data storage | |
| 44. |
What is a text-based notifier that is mostly shows the context in which the user is working, and it is also generated by the software system? |
| A. | Command prompt |
| B. | Cursor |
| C. | Command |
| D. | All mentioned above |
| Answer» B. Cursor | |
| 45. |
What is a measure of how well a computer system facilities learning? |
| A. | Usability |
| B. | Functionality |
| C. | Reliability |
| D. | None of the above |
| Answer» B. Functionality | |
| 46. |
What is a black box testing method that divides the input domain of a program into classes of data from which test cases can be derived? |
| A. | Binary partitioning |
| B. | Equivalence partitioning |
| C. | State-based partitioning |
| D. | Attribute-based partitioning |
| Answer» C. State-based partitioning | |
| 47. |
What does the physical connections between the elements of the OO design represent? |
| A. | Cohesion |
| B. | Coupling |
| C. | Both A & B |
| D. | None of the above |
| Answer» C. Both A & B | |
| 48. |
What does Statistical Quality Assurance involve? |
| A. | Tracking each defect to its underlying cause |
| B. | Isolated the "vital few" cause |
| C. | Moving to correct them |
| D. | All mentioned above |
| Answer» E. | |
| 49. |
What computer-based system can have a profound effect on the design that is chosen and also the implementation approach will be applied? |
| A. | Scenario-based elements |
| B. | Class-based elements |
| C. | Behavioural elements |
| D. | Flow-oriented elements |
| Answer» D. Flow-oriented elements | |
| 50. |
Waht is the most common measure for correctness? |
| A. | Defects per KLOC |
| B. | Errors per KLOC |
| C. | $ per KLOC |
| D. | Pages of documentation per KLOC |
| Answer» B. Errors per KLOC | |