

MCQOPTIONS
Saved Bookmarks
This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Geotechnical Engineering knowledge and support exam preparation. Choose a topic below to get started.
1. |
What will be the shearing resistance of a sample of clay in an unconfined compression test, falls under a load of 150 N? Take change of cross-section Af=2181.7 mm2. |
A. | 68.75 kN/m<sup>2</sup> |
B. | 34.38 kN/m<sup>2</sup> |
C. | 11.35 kN/m<sup>2</sup> |
D. | 0.6875 kN/m<sup>2</sup> |
Answer» C. 11.35 kN/m<sup>2</sup> | |
2. |
The equation for the unconsolidated un drainage strength of clay is __________ |
A. | = c + tan |
B. | f = ccu + tan cu |
C. | = c + |
D. | = tan |
Answer» C. = c + | |
3. |
If the pore pressure is measured during un-drained stage of the test, the result can be expressed in terms of __________ |
A. | C and |
B. | cu |
C. | None of the mentioned |
D. | All of the mentioned |
Answer» B. cu | |
4. |
Negative pore pressure in clay or sand is developed due to __________ |
A. | Expansion on loading |
B. | Over loading |
C. | Loose structure |
D. | Compaction |
Answer» B. Over loading | |
5. |
The value of pore pressure parameter, at failure for saturated clay is __________ |
A. | 1.2 to 2.5 |
B. | 2 to 3 |
C. | 0.3 to 0.7 |
D. | 0.7 to 1.3 |
Answer» C. 0.3 to 0.7 | |
6. |
Factor affecting pore pressure parameters is ___________ |
A. | Type of shear |
B. | Temperature |
C. | Nature of the fluid |
D. | All of the mentioned |
Answer» E. | |
7. |
The change in the pore pressure during an un-drained shear can be explained by ___________ |
A. | Lateral pressure |
B. | Effective stress |
C. | Pore pressure parameter |
D. | Mohr s circle |
Answer» D. Mohr s circle | |
8. |
The consolidated-un drained test can be performed in ___________ methods. |
A. | 3 |
B. | 2 |
C. | 4 |
D. | 1 |
Answer» C. 4 | |
9. |
In an un-drained test on saturated clays, both 1 and 3 is independent of ____________ |
A. | Pore pressure |
B. | Shear strength |
C. | Cell pressure |
D. | Effective pressure |
Answer» D. Effective pressure | |
10. |
The un-drained test is carried out on sample of clay, silt, and peat to determine _____________ |
A. | Shear Strength of natural ground and Sensitivity |
B. | Pore pressure |
C. | None of the mentioned |
D. | All of the mentioned |
Answer» B. Pore pressure | |