Explore topic-wise MCQs in Analog Circuits.

This section includes 11 Mcqs, each offering curated multiple-choice questions to sharpen your Analog Circuits knowledge and support exam preparation. Choose a topic below to get started.

1.

Calculate the DC resistance of diode at VD= -10V from the characteristic graph given below.

A. 1MΩ
B. 10MΩ
C. 15MΩ
D. 5MΩ
Answer» C. 15MΩ
2.

For a diode, at 10mA DC resistance is 70Ω. The voltage corresponding to 10mA will be ____________

A. 0.5V
B. 0.6V
C. 0.7V
D. 0.8V
Answer» D. 0.8V
3.

Determine DC resistance of a diode described by characteristic graph at ID = 10mA.

A. 90 Ω
B. 111.1 Ω
C. 101.0 Ω
D. 100 Ω
Answer» B. 111.1 Ω
4.

FOR_A_DIODE,_AT_10MA_DC_RESISTANCE_IS_70‚ÄÖ√Ñ√∂‚ÀÖ√´¬¨‚ÀÇ._THE_VOLTAGE_CORRESPONDING_TO_10MA_WILL_BE_____________?$#

A. 0.5V
B. 0.6V
C. 0.7V
D. 0.8V
Answer» D. 0.8V
5.

DC resistance of diode is measured at ____________

A. Knee current
B. Cut-in voltage
C. Q-point
D. Reverse breakdown point
Answer» D. Reverse breakdown point
6.

After cut-in voltage AC resistance of diode ____________

A. Slightly decreases
B. Decreases exponentially
C. Slightly increases
D. Increases exponentially
Answer» C. Slightly increases
7.

Average AC resistance and dynamic resistance are ____________

A. Always Equal
B. Never equal
C. Both represents same quantity
D. Calculated from V-I graph
Answer» E.
8.

Static resistance of a diode is ____________

A. Resistance at the q-point, ΔV<sub>D</sub>/ΔI<sub>D</sub>
B. Maximum AC resistance
C. Minimum AC resistance
D. Resistance at operating point, V<sub>D</sub>/I<sub>D</sub>
Answer» C. Minimum AC resistance
9.

As the slope of I-V graph at the Q point increases, AC resistance will _____________

A. Increase
B. Decrease
C. Either increase or decrease
D. Neither increase nor decrease
Answer» C. Either increase or decrease
10.

The reciprocal of slope of current-voltage curve at Q-point gives _____________

A. AC resistance
B. Nominal resistance
C. Maximum dynamic resistance
D. Minimum impedance
Answer» B. Nominal resistance
11.

What is quiescent point or Q-point?

A. Operating point of device
B. The point at which device have maximum functionality
C. The point at which current equal to voltage
D. The point of V-I graph where slope is 0.5
Answer» B. The point at which device have maximum functionality