Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

What is high-temperature coke used for?

A. Ironmaking
B. Production of gas
C. Fuel briquettes
D. Fishnets
Answer» B. Production of gas
2.

Automatic test pattern generators depend o?

A. map design
B. layout design
C. logic domain
D. testing domain
Answer» D. testing domain
3.

numbers are : 2 4 6 8 1?

A. numbers are : 3 5 7 9 11
B. numbers are : 2 3 4 5 6
C. None of the mentioned
Answer» D.
4.

Name the tiny bone of the middle ear, which convert sound into vibration?

A. Stapes
B. Malleus
C. Incus
D. Anvil
Answer» B. Malleus
5.

Filter medium filtration is also called ___?

A. Locking
B. Blocking
C. Chapping
D. Chipping
Answer» C. Chapping
6.

Choose the incorrect statement with respect to rolling circle replication?

A. It is for a single replication fork and yields concatemeric molecule
B. Staggered cleavage of DNA takes place at the cos sites
C. The cleavage generates 10 nucleotide long overhangs
D. Without the cos sites, packaging won’t be possible
Answer» D. Without the cos sites, packaging won‚Äö√Ñ√∂‚àö√ë‚àö¬•t be possible
7.

Is induced drag is related to the amount of induced downwash?

A. True
B. False
Answer» B. False
8.

The main application of solar cells is to generate the electricity from _________?

A. Water
B. Sunlight
C. Wind
D. Biomass
Answer» C. Wind
9.

Parasympathetic nerve arises from which region of the nervous system?

A. Cranio sacral
B. Lumbar
C. Cervical
D. Thoracolumbar
Answer» B. Lumbar
10.

Which of the following statements are followed in delegated style?

A. The main advantage of a program with such a control style is that it is easy to ?nd where decisions are being made
B. If the controllers are not too big and complex, it is easy to understand how decisions are made and to alter the decision-making process
C. All of the mentioned
D. None of the mentioned
Answer» E.
11.

The joints that are caused due to compressive forces are called a?

A. T joints
B. C joints
C. Longitudinal joints
D. Compression joints
Answer» E.
12.

Pyrolysis of PCBs and chlorinated benzene at high temperatures produced PCDFs. True or False?

A. True
B. False
Answer» B. False
13.

The CLTS (Clear Task Switch Flag) instruction records every execution of WAIT and ESC and is trapped if the flag(s?

A. PE (Protection Enable) and TS (task switch) flags are set
B. Emulate Processor extension flag is set
C. MP flag and task switched flag is set
D. PE and MP flag is set
Answer» D. PE and MP flag is set
14.

Which of the following molecules will not show infrared spectrum?

A. H<sub>2</sub>
B. HCI
C. CH<sub>4</sub>
D. H<sub>2</sub>0
Answer» B. HCI
15.

Iron oxide and copper depositions can be prevented by adding ___________ to the boiler water?

A. Calgon
B. Carbonate
C. EDTA
D. EBT
Answer» D. EBT
16.

While designing a pump for backwash for a filter what will be the velocity assumed?

A. 24 m/h
B. 36m/h
C. 30 m/h
D. 20 m/h
Answer» B. 36m/h
17.

Find XK+1? If Xk = 0.5, consider a difference of 5 stage?

A. 4.5
B. 5.5
C. 3.5
D. Can’t be calculated
Answer» C. 3.5
18.

Which bead character is seen due to too high welding current?

A. Pilling of metal
B. Pilling of weld metal
C. Excess splatter
D. Small bead formation
Answer» D. Small bead formation
19.

Forced response consists of ________?

A. Homogenous solution and general solution
B. General solution alone
C. Homogenous solution and particular solution
D. Particular solution alone
Answer» D. Particular solution alone
20.

In the Delta or Mesh connection, there will be __________ number of common terminals?

A. 1
B. 2
C. 3
D. 0
Answer» E.
21.

Flat iron bars are used generally for?

A. R.C.C
B. Grill work
C. Roofing
D. Truss
Answer» C. Roofing
22.

The typical parts like cylinder heads, gears and bushings are produced using the shell molding process?

A. True
B. False
Answer» B. False
23.

Inorder to simplify the null value confusion in the rank function we can specif?

A. Not Null
B. Nulls last
C. Nulls first
D. Either Nulls last or first
Answer» B. Nulls last
24.

Consider an inverting amplifier circuit designed using an op amp and two resistors, R1 = 10 kΩ and R2 = 1 MΩ. If the op amp is specified to have an input bias current of 100 nA and an input offset current of 10 nA, find the output dc offset voltage resulting?#

A. 0.1 mV
B. 1 mV
C. 10 mV
D. 100 mV
Answer» C. 10 mV
25.

Scotch yoke mechanism is used to generat?

A. sine functions
B. square roots
C. logarithms
D. inversions
Answer» B. square roots
26.

What type of transmission line is used to intentionally delay the signal?

A. Parallel lines
B. Serial lines
C. Delay lines
D. Transit lines
Answer» D. Transit lines
27.

The prestressed concrete silos are generally preferred for storage of?

A. Blocks
B. Anchors
C. Fertilizers
D. Concrete
Answer» D. Concrete
28.

For infants, the pulse oximetry band is attached to their _____?

A. arm
B. leg
C. palm
D. foot
Answer» E.
29.

Basic elements of a strip chart recorder are _______?

A. chalk and board
B. pen and pencil
C. pencil and paper
D. pen and chart paper
Answer» E.
30.

DNA polymerase III holoenzyme does not need to interact with the helicase during replication?

A. True
B. False
Answer» C.
31.

Which of the following is used to transfer genes in plants?

A. Ti plasmid
B. pBR 322
C. EcorI
D. pUC 18
Answer» B. pBR 322
32.

Which of the following is used to run ad hoc R commands?

A. R Console
B. R Primer
C. Both R Console and R Primer
D. None of the mentioned
Answer» B. R Primer
33.

What is the pH range of effluent after treatment?

A. Between 4.4 and 5.5
B. Between 4.8 and 6.1
C. Between 6.8 and 7.8
D. Between 7.8 and 8.3
Answer» D. Between 7.8 and 8.3
34.

A function can have both the const and non-const version in the same program?

A. True
B. False
Answer» B. False
35.

The values of reactivity ratios, r1 and r2 are independent of the change in the mechanism of chain propagation, form radical to ionic mechanism. State true or false?

A. True
B. False
Answer» C.
36.

Determine the centre of pressure on an isosceles triangle plate of base 6m and altitude 6m when it is immersed vertically in an oil of specific gravity 0.75. The base of the plate coincides with the free surface of oil?

A. 6 m
B. 3 m
C. 9 m
D. 12 m
Answer» C. 9 m
37.

How many transformers are considered in the power system?

A. 2
B. 3
C. 4
D. 5
Answer» B. 3
38.

Which of the following is a part of system release?

A. electronic and paper documentation describing the system
B. packaging and associated publicity that have been designed for that release
C. an installation program that is used to help install the system on target hardware
D. all of the mentioned
Answer» E.
39.

Which of the following is not true about diffused resistor?

A. Limitation due to small range of resistance
B. Resistance depends upon surface geometry
C. Resistance depends on diffusion characteristic of material
D. Diffused resistors are non-economical
Answer» E.
40.

Ratio of pump or turbine with reference pump or turbine is called as ________?

A. Efficiency
B. Performance
C. Heat generated
D. Relative velocity
Answer» C. Heat generated
41.

The metadata log is ______________?

A. error log
B. ddl log
C. binary log
D. relay log
Answer» C. binary log
42.

What is the maximum temperature that can should be given before hot forging process?

A. 150°C
B. 200°C
C. 250°C
D. 300°C
Answer» E.
43.

The gap between crest and root lines should not be less than ______ the thickness of thick line?

A. half
B. equal
C. twice
D. thrice
Answer» D. thrice
44.

Total cross-sectional area of earthing conductor depends on ____________?

A. Minimum fault current
B. Maximum fault current
C. System output voltage
D. System input voltage
Answer» C. System output voltage
45.

Visibility is ________ to required availability?

A. Proportional
B. Inversely proportional
C. Equal
D. Not related
Answer» C. Equal
46.

The weight of the hammer in modified proctor test apparatus i?

A. 2.8kg
B. 4.7kg
C. 5.0kg
D. 6.0kg
Answer» C. 5.0kg
47.

What is the number of possible outputs if there is 6 lines digital input?

A. 64
B. 32
C. 16
D. 128
Answer» B. 32
48.

On which portions only pure substance are present?

A. 1, 3, 5
B. 1, 5
C. only 1
D. 3, 5
Answer» C. only 1
49.

A cohesive soil yields a maximum dry density of 1.8 g/cc at an OMC of 16 % during a standard proctor test. What will be its degree of saturation?Take G=2.6?

A. 100 %
B. 60.45 %
C. 43.27 %
D. 89.79 %
Answer» E.
50.

Aerated Concrete is ________?

A. Very heavy weight
B. Heavy weight
C. Medium weight
D. Light weight
Answer» E.