MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
What is the minimum temperature given before hot forging? |
| A. | 100°C |
| B. | 150°C |
| C. | 200°C |
| D. | 250°C |
| Answer» D. 250¬¨¬®‚Äö√†√ªC | |
| 2. |
The crests of the thread are shown by a ______ continuous line and roots by ______ continuous line. |
| A. | thin, thick |
| B. | thick, thin |
| C. | single, thin |
| D. | double, thick |
| Answer» C. single, thin | |
| 3. |
What is the coupling factor if self-inductances and mutual inductance are 5.096 H, 0.05098 H and 0.5096 H respectively? |
| A. | 1 |
| B. | 1.499 |
| C. | 1.2 |
| D. | 0.699 |
| Answer» B. 1.499 | |
| 4. |
The link availability measures the percentage of time the link can be ______ |
| A. | Open |
| B. | Closed |
| C. | Used |
| D. | None of the mentioned |
| Answer» C. Used | |
| 5. |
Ink doesn’t consists of pigments, such as TiO2, to supply colour and opacity and a vehicle to carry the pigment and bind it to the paper.$ |
| A. | True |
| B. | False |
| Answer» C. | |
| 6. |
The shear strength is more for |
| A. | Cohesive soil |
| B. | Non cohesive soil |
| C. | Frictionless soil |
| D. | Dust |
| Answer» B. Non cohesive soil | |
| 7. |
AMPS stands for ________ |
| A. | American Mobile Phone System |
| B. | Advanced Mobile Phone Service |
| C. | American Mobile Phone Service |
| D. | Advanced Mobile Phone System |
| Answer» C. American Mobile Phone Service | |
| 8. |
Strength of soil sample compacted wet of optimum is influenced by____________ |
| A. | Compressibility |
| B. | Permeability |
| C. | Manner of compaction |
| D. | Amount of compaction |
| Answer» D. Amount of compaction | |
| 9. |
Light weight cement content for compressive strength 27.58 MPa is _______ kg/m3. |
| A. | 237-303 |
| B. | 261-332 |
| C. | 314-392 |
| D. | 373-445 |
| Answer» D. 373-445 | |
| 10. |
The scoring of gaps in a MSA (Multiple Sequence Alignment) has to be performed in a different manner from scoring gaps in a pair-wise alignment |
| A. | True |
| B. | False |
| Answer» B. False | |
| 11. |
Testes are protected in scrotum because they _________ |
| A. | Produce heat |
| B. | Produce sperms |
| C. | Help in micturition |
| D. | Control homeostasis |
| Answer» C. Help in micturition | |
| 12. |
The general model for the lower control limit for a value of quality characteristic “w” will be _____$ |
| A. | LCL = μ<sub>w</sub> + Lσ<sub>w</sub> |
| B. | LCL = μ<sub>w</sub> – Lσ |
| C. | LCL = μ<sub>w</sub> – Lσ<sub>w</sub> |
| D. | LCL = μ<sub>w</sub> + Lσ |
| Answer» D. LCL = ‚âà√≠¬¨‚à´<sub>w</sub> + L‚âà√¨‚àö√¢ | |
| 13. |
Maximum number of filegroups specified for each database is : |
| A. | 32, 667 |
| B. | 32, 777 |
| C. | 32, 766 |
| D. | 32, 767 |
| Answer» E. | |
| 14. |
Find the value of eπ⁄4√2$ |
| A. | 1.74 |
| B. | 1.84 |
| C. | 1.94 |
| D. | 1.64 |
| Answer» B. 1.84 | |
| 15. |
Which, among the following, is a correct expression for ‚à´0.$ |
| A. | ‚à´0=BH |
| B. | ‚à´0=B/H |
| C. | ‚à´0=H/B |
| D. | ‚à´0=BH<sup>2</sup> |
| Answer» C. ‚Äö√Ñ√∂‚àö‚Ƭ¨¬•0=H/B | |
| 16. |
Which element represents a control for generating a public-private key pair? |
| A. | ins |
| B. | keygen |
| C. | key |
| D. | command |
| Answer» C. key | |
| 17. |
How much % does the inorganic material constitute in the solid feed? |
| A. | 22 |
| B. | 44 |
| C. | 66 |
| D. | 88 |
| Answer» E. | |
| 18. |
The number of degrees of freedom for a diatomic gas molecule is |
| A. | 2 |
| B. | 3 |
| C. | 5 |
| D. | 6 |
| Answer» D. 6 | |
| 19. |
Heat resistant plaster is a building material used for coating walls and chimney breasts. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 20. |
A set of hard disk drives with a controller mounted in a single box, forming a single large storage unit is ____________ |
| A. | Disk array |
| B. | Drives |
| C. | Compact drives |
| D. | Multi-cores |
| Answer» B. Drives | |
| 21. |
Steady state accuracy specified in terms of: |
| A. | Steady state error |
| B. | Damping ratio |
| C. | Natural frequency |
| D. | All of the mentioned |
| Answer» B. Damping ratio | |
| 22. |
Command line to obtain the device Id? |
| A. | iotkit-admin device-id |
| B. | iotkit-admin deviceid |
| C. | Iotkit – admin device-id |
| D. | Iotkit – admin device – id |
| Answer» B. iotkit-admin deviceid | |
| 23. |
Which of the following happens when large solid angle is intercepted as the detector is placed close to the sample? |
| A. | Maximum efficiency increases |
| B. | Maximum efficiency decreases |
| C. | Efficiency is not affected |
| D. | Process response becomes fast |
| Answer» B. Maximum efficiency decreases | |
| 24. |
Which of the following can’t be repaired by BER?$ |
| A. | Abasic sites |
| B. | Deamination |
| C. | CPD |
| D. | Oxidative damage |
| Answer» D. Oxidative damage | |
| 25. |
The flue gases of natural draught are at higher temperature when compared to flue gases in artificial gas? |
| A. | True |
| B. | False |
| Answer» B. False | |
| 26. |
During normal grain growth, the moving boundaries will be attached to the particles, so that _____ |
| A. | the particles exert a pulling force on the boundary |
| B. | the particles exert a pushing force on the boundary |
| C. | grain growth occurs at higher rate |
| D. | surface structure does not get disturbed |
| Answer» B. the particles exert a pushing force on the boundary | |
| 27. |
The constellation of M-ary PSK is _______ dimensional. |
| A. | One |
| B. | Does not exist |
| C. | Two |
| D. | Three |
| Answer» D. Three | |
| 28. |
For some percentage increase in the torque, which DC motor will have the least percentage increase of input current? |
| A. | Series motor |
| B. | Shunt motor |
| C. | Cumulative compound motor |
| D. | Separately exited motor |
| Answer» B. Shunt motor | |
| 29. |
Which of the following measurement is relative to 1percentage of viewport’s larger dimension?$ |
| A. | vw |
| B. | vmax |
| C. | vmin |
| D. | ch |
| Answer» C. vmin | |
| 30. |
The coupling and directivity of couplers with apertures in planar lines can be adjusted as per the requirement of the application. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 31. |
By method of images, the problem can be easily calculated by replacing the boundary with which polygon? |
| A. | Rectangle |
| B. | Trapezoid |
| C. | Square |
| D. | Triangle |
| Answer» E. | |
| 32. |
The purpose of using DBcc as a branch instruction is ______ |
| A. | It provides two conditions to be satisfied for a branch to occur |
| B. | It provides a counter to check the number of times the branch as taken place |
| C. | It is used to check the condition along with the branch condition |
| D. | None of the mentioned |
| Answer» E. | |
| 33. |
The amount of flow in EGR, can be as high as ____________ of the total intake. |
| A. | 20% |
| B. | 30% |
| C. | 35% |
| D. | 40% |
| Answer» C. 35% | |
| 34. |
To define a ________ in a JavaBean class, public getter and setter methods have to be supplied. |
| A. | Class |
| B. | Object |
| C. | Value |
| D. | Property |
| Answer» E. | |
| 35. |
Concentration and composition of the etchant electrolyte can affect the features of the etching product. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 36. |
Technical approaches center on extracting information from which of the following? |
| A. | Existing compiler technology |
| B. | Data Flow analysis |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 37. |
Any digital content which any individual creates and is not acceptable to the society, it’s a cyber-crime that comes under _________ of IT Act.$ |
| A. | Section 66 |
| B. | Section 67 |
| C. | Section 68 |
| D. | Section 69 |
| Answer» C. Section 68 | |
| 38. |
With an increase in strain rate, ductility ______ and tensile strength _____ |
| A. | Increases, increases |
| B. | Increases, decreases |
| C. | Decreases, increases |
| D. | Decreases, decreases |
| Answer» D. Decreases, decreases | |
| 39. |
For a step-up/step-down chopper, if the duty cycle > 0.5 then |
| A. | Vo = Vs |
| B. | Vo < Vs |
| C. | Vo > Vs |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 40. |
Which of the following is not true about AJMM? |
| A. | It can be used for shallow depth cut on ceramic materials |
| B. | It can be used for medical applications |
| C. | It can be used for pressure sensors |
| D. | It can be used in machining of high strength materials |
| Answer» B. It can be used for medical applications | |
| 41. |
Let the sets be A, B, C, D then (A ‚à© B) X (C ‚à© D) is equivalent to$ |
| A. | (A X C) ‚à© (B X D) |
| B. | (A X D) U (B X C) |
| C. | (A X C) U ( B X D) |
| D. | None of the mentioned |
| Answer» B. (A X D) U (B X C) | |
| 42. |
Calculate the specific weight of oil. If the specific gravity is 0.95. Take specific weight of water is 1000 kg/m3. |
| A. | 750 kg/m<sup>3</sup> |
| B. | 850 kg/m<sup>3</sup> |
| C. | 950 kg/m<sup>3</sup> |
| D. | 1250 kg/m<sup>3</sup> |
| Answer» D. 1250 kg/m<sup>3</sup> | |
| 43. |
The Sporozoa belongs to which of the following phylum? |
| A. | Ciliophora |
| B. | Labyrinthomorpha |
| C. | Microspora |
| D. | Apicomplexa |
| Answer» E. | |
| 44. |
What is the amount of noise produced in hand ramming with hammer? |
| A. | 90 dB |
| B. | 95 dB |
| C. | 100 dB |
| D. | 105 dB |
| Answer» C. 100 dB | |
| 45. |
On the Dairy Cow Unified Score Card, what is not the part of the four divisions? |
| A. | age |
| B. | general appearance |
| C. | dairy character |
| D. | udder |
| Answer» B. general appearance | |
| 46. |
If height of P wave is X, then the height of the R wave is _____ |
| A. | X/32 |
| B. | 32/X |
| C. | X/16 |
| D. | 32X |
| Answer» E. | |
| 47. |
Which of the following methods of spirit levelling is, levelling in which the difference in elevation between two points is accurately determined by two sets of reciprocal observations? |
| A. | Profile levelling |
| B. | Cross levelling |
| C. | Differential levelling |
| D. | Reciprocal levelling |
| Answer» E. | |
| 48. |
Piston compression rings are made of |
| A. | Cast iron |
| B. | Steel |
| C. | Aluminium |
| D. | Bronze |
| Answer» B. Steel | |
| 49. |
____________________ mortar is waterproof and consists of some quantity of pulverized alum. |
| A. | Water proof |
| B. | Hump |
| C. | Cement |
| D. | Lime |
| Answer» B. Hump | |
| 50. |
What actually is the order of stack frame for a parameter to pass to a subroutine? |
| A. | parameter passed to a subroutine |
| B. | return address |
| C. | saved copies of registers(R4-R11) |
| D. | all of the mentioned |
| Answer» E. | |