MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 15 Mcqs, each offering curated multiple-choice questions to sharpen your Pulp Paper knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Drop leg is ideally a vertical drop. It’s horizontal section is a needed, and it should be exactly horizontally placed at least __________m below the washer. |
| A. | 1 |
| B. | 5 |
| C. | 55 |
| D. | 7 |
| Answer» E. | |
| 2. |
The vacuum supplied by drop leg for the first stage is of range ___________ |
| A. | 12kPa |
| B. | 15kPa |
| C. | 20kPa |
| D. | 24kPa |
| Answer» E. | |
| 3. |
A ___________ is used to siphon the water from the washer so that a vacuum pump is not usually required. |
| A. | Drop hand |
| B. | Drop leg |
| C. | Drop finger |
| D. | Drop thumb |
| Answer» C. Drop finger | |
| 4. |
The soda loss in pulp is traditionally measured as ___________ pulp on a Na2SO4 basis. |
| A. | Kg/lb |
| B. | Lb/kg |
| C. | Lb/ton |
| D. | Ton/lb |
| Answer» D. Ton/lb | |
| 5. |
Pulp washers are also known as ‘Black stock washers’. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 6. |
THE_VACUUM_SUPPLIED_BY_DROP_LEG_FOR_THE_FIRST_STAGE_IS_OF_RANGE____________?$ |
| A. | 12kPa |
| B. | 15kPa |
| C. | 20kPa |
| D. | 24kPa |
| Answer» E. | |
| 7. |
Drop_leg_is_ideally_a_vertical_drop._It’s_horizontal_section_is_a_needed,_and_it_should_be_exactly_horizontally_placed_at_least___________m_below_the_washer.$# |
| A. | 1 |
| B. | 5 |
| C. | 55 |
| D. | 7 |
| Answer» E. | |
| 8. |
A ___________ is used to siphon the water from the washer so that a vacuum pump is not usually required? |
| A. | Drop hand |
| B. | Drop leg |
| C. | Drop finger |
| D. | Drop thumb |
| Answer» C. Drop finger | |
| 9. |
The soda loss in pulp is traditionally measured as ___________ pulp on a Na2SO4 basis. |
| A. | Kg/lb |
| B. | Lb/kg |
| C. | Lb/ton |
| D. | Ton/lb |
| Answer» D. Ton/lb | |
| 10. |
Low dilution factor ___________ the energy requirements of the multiple effects evaporators. |
| A. | Increases |
| B. | Decreases |
| C. | Freezes |
| D. | Skips |
| Answer» C. Freezes | |
| 11. |
Following is the way to calculate dilution factor:- |
| A. | Mass of water per unit mass of dry pulp |
| B. | Mass of acid per unit mass of dry pulp |
| C. | Mass of buffer solution per unit mass of dry pulp |
| D. | Mass of base per unit mass of dry pulp |
| Answer» B. Mass of acid per unit mass of dry pulp | |
| 12. |
The dilution factor is a measure amount of ___________ used in washing. |
| A. | Acid |
| B. | Base |
| C. | Water |
| D. | Salt |
| Answer» D. Salt | |
| 13. |
Following the reason behind the removal of lignin in Pulp washers:- |
| A. | To reduce bleaching chemical demand |
| B. | To increase bleaching chemical demand |
| C. | To maintain constant bleaching chemical demand |
| D. | To freeze bleaching chemical demand |
| Answer» B. To increase bleaching chemical demand | |
| 14. |
Pulp washers use counter-current flow between stages such that the pulp moves opposite in direction to the flow of wash water. |
| A. | True |
| B. | False |
| Answer» C. | |
| 15. |
Pulp washers are also known as ‘Black stock washers’. |
| A. | True |
| B. | False |
| Answer» B. False | |