Explore topic-wise MCQs in Signals & Systems.

This section includes 11 Mcqs, each offering curated multiple-choice questions to sharpen your Signals & Systems knowledge and support exam preparation. Choose a topic below to get started.

1.

A band pass signal extends from 4-6 kHz. The smallest sampling frequency required to attain all the information in the signal is _________________

A. 10 kHz
B. 8 kHz
C. 6 kHz
D. 4 kHz
Answer» E.
2.

A relay coil having voltage of magnitude 210 V and frequency 50 Hz is connected to a 210 V, 50 Hz supply. If it has resistance of 50 and an inductance of 0.2 H, the apparent power is _____________

A. 549.39 VA
B. 275.6 VA
C. 157 VA
D. 187 VA
Answer» B. 275.6 VA
3.

Increased pulse-width in the flat-top sampling , leads to ______________

A. Attenuation of high frequencies in reproduction
B. Attenuation of low frequencies in reproduction
C. Greater aliasing errors in reproduction
D. No harmful effects in reproduction
Answer» B. Attenuation of low frequencies in reproduction
4.

Let x(t) be a continuous time, real valued signal band limited to F Hz. The Nyquist sampling rate in Hz, for y(t) = x(0.5t) + x(t) x(2t) is ______________

A. F
B. 2F
C. 4F
D. 8F
Answer» D. 8F
5.

A band-limited signal with a maximum frequency of 5 kHz is to be sampled. According to the sampling theorem, the sampling frequency which is not valid is _______________

A. 5 kHz
B. 12 kHz
C. 15 kHz
D. 20 kHz
Answer» B. 12 kHz
6.

A voltage LT is given as ( frac{4s^2+3s+2}{7s^2+6s+5} ). It is applied across a 2H inductor having zero initial current. The current in the inductor at t = is ___________

A. 0
B. 1/5 A
C. 2/7 A
D. 2/5 A
Answer» C. 2/7 A
7.

Given that, F(s) = ( frac{w}{s^2+w^2} ). Re[s]>0. The final value of f(t) is ___________

A. 0
B. 1
C. [-1,1]
D.
Answer» D.
8.

The Laplace transform of a signal is given as Y(s) = ( frac{1}{s(s-1)} ), then the final value is ___________

A. -1
B. 0
C. 1
D. Unbounded
Answer» E.
9.

The final value of X(s) = ( frac{12(s+1)}{s(s^2+4)} ) is _________

A. 1
B. 2
C. 3
D. Undetermined
Answer» E.
10.

The impulse response h[n] of a linear time-invariant system is h[n] = u [n+3] + u [n-2] 2u [n-7] where, u[n] is the step unit response. The above system is ________________

A. Stable but not causal
B. Stable and causal
C. Causal but unstable
D. Unstable and not causal
Answer» B. Stable and causal
11.

The property of Fourier Transform which states that the compression in time domain is equivalent to the expansion in the frequency domain is ____________

A. Duality
B. Scaling
C. Time scaling
D. Frequency shifting
Answer» D. Frequency shifting