Explore topic-wise MCQs in Irrigation Engineering.

This section includes 13 Mcqs, each offering curated multiple-choice questions to sharpen your Irrigation Engineering knowledge and support exam preparation. Choose a topic below to get started.

1.

A well is to be constructed in a fine sandy sub-soil formation. The discharge of the well under the depression head of 4 m is 0.004 m3/sec. Calculate the diameter of the well.

A. 2 m
B. 2.5 m
C. 3 m
D. 3.5 m
Answer» D. 3.5 m
2.

Mota layer sometimes is also known as Marbarwa or Magasan is an impervious layer.

A. True
B. False
Answer» B. False
3.

Which of the following method of lifting water is very suitable when the depth of well is from 12 to 20 meters?

A. Denkli
B. Churus
C. Persian wheel
D. Windmill
Answer» D. Windmill
4.

If the sub-soil formation is of fine sand, the rough value of the specific yield of well per unit area of the well (K/A) given by Marriot is ____________

A. given by Marriot is ____________a) 0.25
B. 0.50
C. 0.75
D. 1.0
Answer» C. 0.75
5.

Open well has big diameter than tube well because ____________i. Open well has to irrigate more area.ii. Water contribution to the well is natural and therefore, the percolation area has to be more.iii. Storage of water has to be made before irrigation is done.

A. i and ii
B. i and iii
C. ii and iii
D. i, ii and iii
Answer» D. i, ii and iii
6.

An open well is called shallow well when ____________

A. the depth of well is small
B. the water table is high
C. it does not encounter mota formation
D. it finds the foundation in the mota formation
Answer» D. it finds the foundation in the mota formation
7.

A well 3 meters in diameter has its normal water level 3 meters below the ground level. By pumping water level in the well is depressed to 10 meters below the ground level. In 4 hours the water rises by 5 meters. Calculate the specific yield of the well.

A. 2.213 m3/hr
B. 5 m3/hr
C. 1.242 m3/hr
D. 3.224 m3/hr
Answer» B. 5 m3/hr
8.

Depending upon the type of sub-soil formation, the construction of well is done in two ways i.e. Dug wells and Sunk wells. Dug wells are constructed in soft formations.

A. True
B. False
Answer» C.
9.

Which type of open well is suitable when the sub-soil is formed of gravel or coarse sand deposits?

A. Unlined wells
B. Wells with pervious lining
C. Wells with impervious lining
D. Temporary wells
Answer» C. Wells with impervious lining
10.

The yield of a well depends on ________________

A. permeability of soil
B. area of aquifer opening into the wells
C. actual flow velocity
D. permeability and actual flow velocity
Answer» B. area of aquifer opening into the wells
11.

The safe depression head for open wells is generally taken to be x times the critical depression head when x is ______

A. 1/6
B. 1/3
C. 1/2
D. 3/4
Answer» C. 1/2
12.

The performance of a well is measured by its ________

A. specific capacity
B. specific yield
C. storage coefficient
D. permeability coefficient
Answer» B. specific yield
13.

The rate of water contribution to the well increases with the increase in the depression head.

A. True
B. False
Answer» B. False