Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Up to what temperatures are high alloy steels heated before treating them by oxygen cutting?

A. 675°C
B. 725°C
C. 775°C
D. 825°C
Answer» B. 725¬¨¬®‚Äö√†√ªC
2.

Which is the commutative property of the LTI System in case of discrete time system?

A. x[n]+h[n]=h[n]+x[n]
B. x[n]+h[n]=h[n]*x[n]
C. x[n]*h[n]=h[n]*x[n]
D. x[t]*h[t]=h[n]*x[n]
Answer» D. x[t]*h[t]=h[n]*x[n]
3.

The first amino acid added by the tRNA is added to the anticodon ____________

A. AUG
B. UAC
C. ACG
D. UGC
Answer» C. ACG
4.

Which of the following are used as blood substitutes?

A. Hemoglobin based oxygen carriers, Perfluorocarbon emulsions
B. Plasma, hemoglobin based oxygen carriers
C. Plasma, hematopoetic cells
D. Hematopoetic cells encapsulating hemoglobin, perfluorocarbon emulsions
Answer» B. Plasma, hemoglobin based oxygen carriers
5.

Which of the following is one of the most commonly used anode material?

A. Carbon
B. Tungsten
C. Magnesium
D. Cesium
Answer» D. Cesium
6.

____________ forms the first link in transmitting the gas forces to the output shaft.

A. Cylinder
B. Piston
C. Combustion chamber
D. Exhaust manifold
Answer» C. Combustion chamber
7.

The magnetising current of a transformer is usually small because it has _______

A. Small air gap
B. Large leakage flux
C. Laminated silicon steel core
D. Fewer rotating parts
Answer» B. Large leakage flux
8.

The continuous strain, which the concrete undergoes due to application of external loads, is called __________

A. Workability
B. Segregation
C. Bleeding
D. Creep
Answer» E.
9.

The graduations of which scale is derived from the primary scale?

A. Comparative scale
B. Vernier scale
C. Plain scale
D. Diagonal scale
Answer» C. Plain scale
10.

The spacing of joint depends on

A. Type of joint
B. Type of construction
C. Type of material
D. Same for all joints
Answer» B. Type of construction
11.

Monopolar needle electrode have a coating of______________ material over the stainless steel wires which are bare only at the tips.

A. carbon
B. calcium
C. teflon
D. sodium
Answer» D. sodium
12.

Site Hazard Assessment always necessary. True or False.

A. True
B. False
Answer» C.
13.

_________ are too large to easily be measured by their zeta potential.

A. Filbers
B. Cationic polymer
C. Lyophobic
D. Lyophilic
Answer» B. Cationic polymer
14.

How the gas behave across the fluidized bed, when the velocity is more than minimum fluidization?

A. Bubbles formation
B. Slugs formation
C. Smooth flow
D. None of the mentioned
Answer» B. Slugs formation
15.

What is the kind of lattice in a delta iron?

A. Face centered cubic
B. Body centered cubic
C. Hexagonal closely packed
D. Tetragonal closely packed
Answer» C. Hexagonal closely packed
16.

Which of the following is not the component of USM machine?

A. Slurry delivery
B. Transducer
C. Concentrator
D. Lead screw
Answer» E.
17.

For a _________ state DFA, the time taken for DFA-NFA conversion is O(n).

A. n
B. n<sup>1/2</sup>
C. n<sup>2</sup>
D. 2<sup>n</sup>
Answer» B. n<sup>1/2</sup>
18.

Which one of the following is the apex organization in the country in the field of pollution control?

A. Water Pollution Control Board
B. State Pollution Control Board
C. Central Pollution Control Board
D. Air pollution Control Board
Answer» D. Air pollution Control Board
19.

To arrive at a form which is suitable for implementation in some programming language is the purpose of

A. Structured Analysis (SA)
B. Structured Design (SD)
C. Detailed Design (DD)
D. None of the mentioned
Answer» C. Detailed Design (DD)
20.

The net safe bearing capacity is defined by which of the following equation?

A. qns=qnf / F
B. qns = qnf + σ̅
C. qns = qf – σ̅
D. All of the mentioned
Answer» B. qns = qnf + ‚âà√¨‚àö√¢‚àö√â‚àö√±
21.

The fill command cannot take more than ______ inputs.

A. 1
B. 3
C. 2
D. Many
Answer» C. 2
22.

The Fermat’s little theorem for odd prime p and coprime number a,is:$

A. a<sup>p-1</sup> ≡ 1 (mod p)
B. a<sup>p-1</sup> ≡ 7 (mod p)
C. a<sup>p(2)-1</sup> ≡ 1 (mod p)
D. None of the mentioned
Answer» B. a<sup>p-1</sup> ‚Äö√Ñ√∂‚àö¬¢¬¨‚àû 7 (mod p)
23.

Which of the following is a ferrous foundry?

A. Brass foundry
B. Bronze foundry
C. High alloy steel foundry
D. Zinc-base foundry
Answer» D. Zinc-base foundry
24.

Which of the following causes the disease acne vulgaris?

A. Staphylococcus epidermis
B. Diphtheroids
C. P.acnes
D. E.coli
Answer» D. E.coli
25.

The phase variation for an oscillator or synthesizer is given by:

A. ∆f*sin ω<sub>m</sub>t/ f<sub>m</sub>
B. ∆f / f<sub>m</sub>
C. Sin ω<sub>m</sub>t/ f<sub>m</sub>
D. None of the mentioned
Answer» B. ‚Äö√Ñ√∂‚àö‚Ć‚àö√∫f / f<sub>m</sub>
26.

_______ occurs at places where there is considerable variation in the height of water table.

A. Transpiration of trees and shrubs
B. Atmospheric action
C. Horizontal movement of earth
D. Withdrawal of moisture from the sub-soil
Answer» E.
27.

Which of these statements are truly acceptable ?

A. A precondition is an assertion guaranteed to be true when the activity or operation finishes
B. A post condition is an assertion guaranteed to be true when the activity or operation begins
C. Trigger is an event which cause a use case to begin
D. None of the mentioned
Answer» D. None of the mentioned
28.

The surface integral of which parameter is zero?

A. E
B. D
C. B
D. H
Answer» D. H
29.

Which of the following is the main task accomplished by the user?

A. Compose a document
B. Create a spreadsheet
C. Send mail
D. All of the mentioned
Answer» E.
30.

Placenta produces __________

A. Prolactin
B. Oxytocin
C. FSH
D. Estrogen and progesterone
Answer» E.
31.

What is Eutectoid reaction at 727°C?$

A. L (0.53% C) + δ(0.09% C) → γ(0.17% C)
B. L (4.3% C) → γ(2.1 % C) + Fe<sub>3</sub>C (6.67% C)
C. γ (0.8 % C) → α (0.025% C) + Fe<sub>3</sub>C (6.67% C)
D. L (0.53% C) + δ(0.09% C) → γ (0.8 % C)
Answer» D. L (0.53% C) + ‚âà√≠¬¨‚Ä¢(0.09% C) ‚Äö√Ñ√∂‚àö√∫‚àö‚↠‚âà√≠‚Äö√¢‚Ä¢ (0.8 % C)
32.

A whistle giving out 450Hz approaches a stationary observer at a speed of 33m/s. The frequency heard by the observer in Hz is (speed of sound = 330m/s)

A. 409
B. 429
C. 517
D. 500
Answer» E.
33.

After hybridization how the position of the labelled DNA probe is determined?

A. By staining
B. By UV irradiation
C. By using chemiluminescence
D. By electronic microscope
Answer» D. By electronic microscope
34.

What is the nature of the swap file in the Windows NT?

A. static
B. dynamic
C. linear
D. non-linear
Answer» C. linear
35.

In pseudo-random testing, the test length should be ________ the exhaustive test

A. lesser than
B. greater than
C. more than
D. none of the mentioned
Answer» B. greater than
36.

What do you mean by Optimum temperature?

A. Least temperature at which the reaction starts
B. Average temperature to produce desired product
C. Temperature at which we get maximum yield
D. All of the mentioned
Answer» D. All of the mentioned
37.

In modern engines cylinder block and crank case forms a single casting because _________

A. reduces space consumption
B. rigid structure
C. wearing properties
D. can withstand high temperature
Answer» C. wearing properties
38.

Force-displacement requirement of statically indeterminate structures depend upon which factor?

A. material’s response
B. magnitude of load applied
C. supports
D. position of load applied
Answer» B. magnitude of load applied
39.

The output resistance of the op-amp with feedback is

A. Same as that of the output resistance without feedback
B. Greater than that of the output resistance without feedback
C. Smaller than that of the output resistance without feedback
D. None of the mentioned
Answer» D. None of the mentioned
40.

What is the temperature measured by a probe on the exterior of a moving aircraft?

A. Static temperature
B. Stagnation temperature
C. Free stream temperature
D. Constant temperature
Answer» C. Free stream temperature
41.

Successive approximation type DVM is based on the principle of ______

A. acceleration of an object
B. weight of an object
C. velocity of an object
D. momentum of an object
Answer» C. velocity of an object
42.

Calculate the initial weight of moisture if one kg block of borax laundry soap with initial moisture content of 15 % is dried and brought to 14.8%.

A. 0.168
B. 0.130
C. 0.200
D. 0.300
Answer» C. 0.200
43.

Where the gel effect is generally more evident in radical polymerization?

A. concentrated monomer
B. diluted monomer
C. independent of concentration
D. none of the mentioned
Answer» B. diluted monomer
44.

Which of the following defines the given statement – “Any relationship between organisms of different species in which one organism is inhibited or destroyed while the other organism remains unaffected”?$

A. Neutralism
B. Mutualism
C. Commensalism
D. Amensalism
Answer» E.
45.

Which air pollutant cause corrosion of building?

A. SO<sub>2</sub>
B. SO<sub>3</sub>
C. CO
D. NO<sub>2</sub>
Answer» B. SO<sub>3</sub>
46.

SiC is used as abrasive for harder materials.

A. True
B. False
Answer» B. False
47.

Trp repressor is a

A. Homodimer
B. Homotrimer
C. Heterodimer
D. Heterotrimer
Answer» B. Homotrimer
48.

An OSPF router receives an LSA. The router checks its sequence number and finds that

A.
B.
Answer» C.
49.

When a signal is assigned a value inside a process, then the value of a signal is updated _________

A. Immediately
B. After one delta cycle
C. At the end of the corresponding process
D. At the end of architecture
Answer» D. At the end of architecture
50.

The task of keeping a view up to date with the underlying data is called as ________

A. View handling
B. View maintenance
C. View management
D. None of the mentioned
Answer» C. View management