Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

If 4 gm of a radioisotope has a half life period of 10 days, the half life of 2 gm of the same isotope will be ____________ days?

A. 5
B. 10
C. 20
D. 30
Answer» C. 20
2.

Hydrogen has ______________ isotopes?

A. No
B. One
C. Two
D. Three
Answer» E.
3.

Hydrogen differs from deuterium in _____________ properties?

A. Radioactive
B. Physical
C. Chemical
D. All A., B. and C.
Answer» C. Chemical
4.

Hydrogen bomb employs the nuclear fusion of __________________ ?

A. Hydrogen
B. Deuterium
C. Tritium
D. Helium
Answer» C. Tritium
5.

Heavy water used in the nuclear reactors to slow down the speed of neutrons is __________________?

A. Highly purified water
B. A compound of oxygen and deuterium
C. Water having dissolved salts of heavy metals
D. None of these
Answer» C. Water having dissolved salts of heavy metals
6.

Heavy water is used as a moderator in a _____________________?

A. Pressurised water reactor (PWR)
B. Boiling water reactor (BWR)
C. Candu reactor
D. Molten sodium cooled reactor
Answer» D. Molten sodium cooled reactor
7.

Heavy water is preferred over ordinary water as a coolant, because it?

A. Acts both as an efficient coolant as well as a moderator
B. Can be heated to a higher temperature without pressurizing
C. Is less prone to radiation damage
D. All A., B. and C.
Answer» E.
8.

Heavy water has maximum density at ______________ °C ?

A. 4
B. 11.6
C. 0
D. 18.6
Answer» C. 0
9.

Heavy water (D2O) in a nuclear reactor serves as a_______________?

A. Coolant
B. Moderator
C. Both A. & B.
D. Neutron absorber
Answer» D. Neutron absorber
10.

Heat is generated in a nuclear reactor (thermal) by_________________?

A. Combustion of a nuclear fuel e.g. uranium
B. Fusion of atoms of uranium
C. Absorption of neutrons in uranium atoms
D. Fission of U-235 by neutrons
Answer» E.
11.

_____________ have the same mass number, but different nuclear charge ?

A. Isotopes
B. Isobars
C. Isotones
D. None of these
Answer» C. Isotones
12.

H2 is a better coolant than CO2, due to it‟s relatively____________________?

A. Lower density
B. Higher specific heat
C. Non-reactivity to uranium
D. Lower neutron capture cross-section
Answer» C. Non-reactivity to uranium
13.

Graphite is used in nuclear reactor as_____________________?

A. Insulation lining of the reactor
B. Fuel
C. Lubricant
D. Retarder of neutron velocity
Answer» E.
14.

Gas cooling as compared to water cooling of nuclear reactors___________________?

A. Cannot attain a high temperature
B. Is more efficient as gas has a higher specific heat
C. Can produce only saturated steam for feeding to power turbine
D. None of these
Answer» E.
15.

Fuel for a fast breeder reactor is_________________?

A. Plutonium
B. Uranium
C. Radium
D. Neptunium
Answer» B. Uranium
16.

Fuel for a nuclear reactor (thermal) is___________________?

A. Uranium
B. Plutonium
C. Radium
D. None of these
Answer» B. Plutonium
17.

First experimental observation of nuclear fission was done by ____________________?

A. Plane
B. Rutherford
C. Fermi
D. Hahn and Strassmann
Answer» D. Hahn and Strassmann
18.

Final product of uranium extraction plant at Jadugoda (Bihar) is________________?

A. Uranium
B. Uranium oxide
C. Uranium carbide
D. Magnesium diuranate
Answer» E.
19.

Fast breeder reactors do not____________________?

A. Use Th-232 as fissile fuel
B. Convert fertile material to fissile material
C. Use fast neutrons for fission
D. Use molten sodium as coolant
Answer» B. Convert fertile material to fissile material
20.

Fast breeder reactors are most usable in India, because of our largest _____________ deposits?

A. Thorium
B. Plutonium
C. Uranium
D. None of these
Answer» B. Plutonium
21.

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of ____________ percent of U-235 (i.e. fissile material)?

A. 15
B. 45
C. 65
D. 85
Answer» E.
22.

Extraction of uranium from its ore is done using ______________ methods?

A. Electrometallurgical
B. Pyrometallurgical
C. Chemical
D. Physical beneficiation
Answer» D. Physical beneficiation
23.

Extraction of uranium from its ore is done by ______________ method?

A. Chemical
B. Pyrometallurgical
C. Physical beneficiation
D. Electrometallurgical
Answer» B. Pyrometallurgical
24.

Enrichment of uranium is done to increase the concentration of ______________ in the natural uranium?

A. U-238
B. U-233
C. U-235
D. Pu-239
Answer» D. Pu-239
25.

Enriched uranium means that, it contains___________________?

A. More than 0.71% of U-235
B. Only fertile material
C. Only fissile material
D. No impurities
Answer» B. Only fertile material
26.

Energy produced in the nuclear fission is of the order of _____________ MeV?

A. 20
B. 200
C. 1000
D. 2000
Answer» C. 1000
27.

Energy equivalent to one atomic mass unit (amu) is ______________ MeV?

A. 9.31
B. 93.1
C. 931
D. 9310
Answer» D. 9310
28.

Emission of β-particles during radioactive decay of a substance is from__________________?

A. Innermost shell
B. Nucleus
C. Outermost shell
D. None of these
Answer» C. Outermost shell
29.

Critical energy should be _______________ the neutron binding energy of the atom in order to initiate a nuclear fission?

A. Equal to
B. Less than
C. More than
D. Either more or less
Answer» D. Either more or less
30.

“Critical mass” is the minimum mass of nuclear fissile material required for the_______________________?

A. Sustainment of chain reaction
B. Power generation on commercial scale
C. Economic power generation
D. None of these
Answer» B. Power generation on commercial scale
31.

“Critical mass” is the minimum mass of nuclear fissile material required for the__________________?

A. Sustainment of chain reaction
B. Power generation on commercial scale
C. Economic power generation
D. None of these
Answer» B. Power generation on commercial scale
32.

Coolant used in a fast breeder reactor is____________________?

A. Molten sodium
B. Heavy water
C. Ordinary water
D. Helium
Answer» B. Heavy water
33.

Coolant used in a boiling water reactor is________________?

A. Hydrogen gas
B. Water
C. Steam
D. A mixture of water & steam
Answer» E.
34.

Commercial power generation from fusion reactor is not yet possible, because___________________?

A. It is difficult to control nuclear fusion reaction
B. The fuel required (i.e., deuterium & tritium) is scarce
C. It is difficult to initiate fusion reaction
D. Quantity of fuel required for initiating fusion reaction is prohibitively high
Answer» B. The fuel required (i.e., deuterium & tritium) is scarce
35.

Commercial power generation from fusion reactor is not yet possible, because_____________________?

A. It is difficult to control fusion reaction
B. The fuel required (e.g. deuterium and tritium) is scarce
C. It is difficult to initiate fusion reaction
D. Quantity of fuel required for initiating fusion reaction is prohibitively high
Answer» B. The fuel required (e.g. deuterium and tritium) is scarce
36.

Candu reactor is a ______________ nuclear reactor?

A. Natural uranium fuelled heavy water cooled & moderated
B. Highly enriched uranium (85% U-235) fuelled
C. Homogeneous
D. Fast breeder
Answer» B. Highly enriched uranium (85% U-235) fuelled
37.

Both tritium and deuterium have the same number of_______________?

A. Neutrons
B. Electrons
C. Protons
D. Nucleons
Answer» B. Electrons
38.

Biological shield is provided in a nuclear power reactor to protect the ______________ from radiation damage?

A. Fuel elements
B. Operating personnels
C. Walls of the reactor
D. None of these
Answer» C. Walls of the reactor
39.

Atoms with same number of neutrons, but different number of nucleons are called___________________?

A. Isotones
B. Isobars
C. Isotopes
D. Isostere
Answer» B. Isobars
40.

Atoms of U-238 and U-235 differ in structure by three_____________________?

A. Electrons and three protons
B. Protons
C. Neutrons
D. Electrons
Answer» D. Electrons
41.

Artificially produced radioactive isotopes are used for____________________?

A. Power generation
B. Treatment of certain diseases
C. Initiating nuclear fission and fusion
D. All A., B. and C.
Answer» C. Initiating nuclear fission and fusion
42.

An ideal coolant for a nuclear reactor should ________________?

A. Be a good absorber of neutrons
B. Be capable of attaining high temperature, only when it is pressurised
C. Have high density, but low heat transfer co-efficient
D. Be free from radiation damage and non-corrosive
Answer» E.
43.

An element having large number of ______________ is most easily subjected to nuclear fission?

A. Protons
B. Electrons
C. Neutrons
D. Nucleons
Answer» E.
44.

An electron has a mass that is approximately ____________ that of the proton?

A. 1836 (approximately)
B. 1/1836 (approximately)
C. 1
D.
Answer» C. 1
45.

Absorption/scattering cross-section of an element is expressed in “barn”, which is equivalent to___________________?

A. 10-24 cm2
B. 10-12 cm
C. 1 Angstrom
D. 10-24 cm
Answer» B. 10-12 cm
46.

A thermal nuclear reactor compared to a fast breeder reactor ?

A. Uses slower neutrons for fission
B. Uses faster neutrons for fission
C. Gives higher power density
D. Requires less fuel to run at the same power level
Answer» B. Uses faster neutrons for fission
47.

A radioactive substance does not emit________________?

A. α-ray
B. Proton
C. Position
D. β-ray
Answer» C. Position
48.

A radioactive isotope undergoes decay with respect to time following _____________ law?

A. Logarithmic
B. Exponential
C. Linear
D. Inverse square
Answer» C. Linear
49.

A pressurised water reactor (PWR) uses pressurised water as a___________________?

A. Coolant
B. Working fluid in power turbine
C. Moderator
D. None of these
Answer» B. Working fluid in power turbine
50.

A nuclear reactor can’t be used for_________________?

A. The production of radioisotopes
B. Supplying intense fields or beams of neutron for scientific experiments
C. Marine ship propulsion
D. None of these
Answer» E.