MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Arduino knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the formulae give us the acceleration in the MPU 6050 along the X axis? |
| A. | Acceleration along the X axis = (Accelerometer X axis raw data/16384) g |
| B. | Acceleration along the X axis = (Accelerometer X axis raw data/1634) g |
| C. | Acceleration along the X axis = (Accelerometer X axis raw data/1384) g |
| D. | Acceleration along the X axis = (Accelerometer X axis raw data/1622) g |
| Answer» B. Acceleration along the X axis = (Accelerometer X axis raw data/1634) g | |
| 2. |
What is the formula for calculating the temperature in degrees celsius from the raw data gathered by the temperature module of the MPU 6050?a) Temperature in degrees celsius = ((temperature sensor data)/340 + 36.53) °/cb) Temperature in degrees celsius = ((temperature sensor data)/340 + 36) °/cc) Temperature in degrees celsius = ((temperature sensor data) + 36.53) °/cd) Temperature in degrees celsius = ((temperature sensor dat |
| A. | Temperature in degrees celsius = ((temperature sensor data)/340 + 36.53) °/c |
| B. | Temperature in degrees celsius = ((temperature sensor data)/340 + 36) °/c |
| C. | Temperature in degrees celsius = ((temperature sensor data) + 36.53) °/c |
| D. | Temperature in degrees celsius = ((temperature sensor data)/340 * 36.53) °/c |
| Answer» B. Temperature in degrees celsius = ((temperature sensor data)/340 + 36) °/c | |
| 3. |
What is the datatype of the output given by the temperature module on the MPU 6050? |
| A. | Signed Double |
| B. | Unsigned Byte |
| C. | Signed Int |
| D. | Unsigned Float |
| Answer» D. Unsigned Float | |
| 4. |
What kind of sensor is the MPU 6050 Sensor? |
| A. | Passive |
| B. | Active |
| C. | Radio |
| D. | Pressure based |
| Answer» C. Radio | |
| 5. |
What is the optimum current that is required to operate the MPU 6050 Sensor? |
| A. | 20 mA |
| B. | 15 mA |
| C. | 200 A |
| D. | 1 A |
| Answer» C. 200 A | |
| 6. |
Which of the formulae give us the angular velocity in the MPU 6050 along the X axis? |
| A. | Angular velocity along the X axis = (Gyroscope X axis raw data/131) °/s |
| B. | Angular velocity along the X axis = (Gyroscope X axis raw data/132) °/s |
| C. | Angular velocity along the X axis = (Gyroscope X axis raw data/12) °/s |
| D. | Angular velocity along the X axis = (Gyroscope X axis raw data/130) °/s |
| Answer» B. Angular velocity along the X axis = (Gyroscope X axis raw data/132) °/s | |
| 7. |
What will happen if we supply a voltage of 25V to the Vcc of the MPU 6050 Sensor? |
| A. | Damage is caused |
| B. | Module will shut down |
| C. | Module will not respond for the time the voltage is applied |
| D. | Module will function normally |
| Answer» B. Module will shut down | |
| 8. |
What is the use of the AD0 pin? |
| A. | I2C Slave Address LSB Pin |
| B. | SPI Master Address MSB Pin |
| C. | UART Slave Address LSB Pin |
| D. | UART Master Address LSB Pin |
| Answer» B. SPI Master Address MSB Pin | |
| 9. |
How many pins are present in the MPU6050 Sensor? |
| A. | 1 |
| B. | 4 |
| C. | 8 |
| D. | 5 |
| Answer» C. 8 | |
| 10. |
What is the use of the MPU 6050 Sensor? |
| A. | Monitors Motion |
| B. | Monitors air pressure |
| C. | Monitors objects |
| D. | Monitors heartbeat |
| Answer» B. Monitors air pressure | |