MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 155 Mcqs, each offering curated multiple-choice questions to sharpen your Mongodb knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
When structure have a good quality it is ___ |
| A. | Architecture planning proper |
| B. | Adequate testing |
| C. | Workmanship should excellent |
| D. | All of the above |
| Answer» E. | |
| 52. |
The number of items in a sample is called___ |
| A. | Sample |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» D. Lot size | |
| 53. |
Deming cycle is that ____ |
| A. | Plan – Do – Check - Act |
| B. | Plan – Check – Act - Do |
| C. | Plan – Do – Act - Check |
| D. | Plan – Act – Check - Do |
| Answer» B. Plan – Check – Act - Do | |
| 54. |
Which of the following are not a benefits for LCA? |
| A. | Does not improvement in the quality of environment |
| B. | To know about Eco-friendly materials |
| C. | Promotion to recycle and reuse of waste materials |
| D. | None of the above |
| Answer» B. To know about Eco-friendly materials | |
| 55. |
The door / window frame should have ______ horn at the upper side. |
| A. | 10 cm |
| B. | 12 cm |
| C. | 15 cm |
| D. | 20 cm |
| Answer» D. 20 cm | |
| 56. |
Which of the following green rating systems are currently working in India? |
| A. | LEED |
| B. | GRIHA |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 57. |
Which of the following sampling techniques is useful when lot size is large and simplerandom sampling is not possible? |
| A. | Stratified sampling |
| B. | Proportional sampling |
| C. | Both A & B |
| D. | None of the above |
| Answer» D. None of the above | |
| 58. |
Largest frequency of the variable is called to___ |
| A. | Mean |
| B. | Mode |
| C. | Median |
| D. | None of the above |
| Answer» C. Median | |
| 59. |
__________of a measurement denotes its closeness to another measurement of the samequality |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» C. Calibration | |
| 60. |
A brick dropped flat on the hard ground from a height of ____ should not break. |
| A. | 0.8 m |
| B. | 1.1 m |
| C. | 1.5 m |
| D. | 1.2 m |
| Answer» E. | |
| 61. |
Removal of props under beams and arches spanning upto 6 m |
| A. | 7 days |
| B. | 14 days |
| C. | 21 days |
| D. | 28 days |
| Answer» C. 21 days | |
| 62. |
Total number of items in a lot is called ____ |
| A. | Item |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» E. | |
| 63. |
In which of the following characteristics are for frequency distribution? |
| A. | Central tendency |
| B. | Spread |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 64. |
Which of the following is a disadvantage of green building? |
| A. | Increases 15-20% cost as compared to normal building |
| B. | Modern techniques are required |
| C. | Experts technicians are required |
| D. | All of the above |
| Answer» E. | |
| 65. |
Which of the following assessments is made by LCA throughout the life of a building? |
| A. | Use of building |
| B. | Transportation of construction material |
| C. | Disposal of surplus waste material |
| D. | All of the above |
| Answer» E. | |
| 66. |
Which of the following ISO 9000 parts has given general guidelines? |
| A. | ISO 9000 and ISO 9001 |
| B. | ISO 9000 and ISO 9002 |
| C. | ISO 9000 and ISO 9003 |
| D. | ISO 9000 and ISO 9004 |
| Answer» E. | |
| 67. |
Zaire proposed "building blocks of TQM"? |
| A. | True |
| B. | False |
| C. | none |
| D. | all |
| Answer» B. False | |
| 68. |
How many elements are covered in ISO 9001 quality system? |
| A. | 19 |
| B. | 13 |
| C. | 20 |
| D. | 15 |
| Answer» D. 15 | |
| 69. |
Which of the following activities are given quality assurance. |
| A. | Safety |
| B. | Durability |
| C. | Reliability |
| D. | All of the above |
| Answer» E. | |
| 70. |
Which of the following type of diagram is helps to analyzing the relationship between twovariables? |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Check list |
| D. | Pareto diagram |
| Answer» C. Check list | |
| 71. |
How many parts are consists in to NBC? |
| A. | 10 |
| B. | 11 |
| C. | 12 |
| D. | 13 |
| Answer» B. 11 | |
| 72. |
For a family of 10-15 members, _____ diameter stoneware pipe is sufficient. |
| A. | 8 cm |
| B. | 10 mm |
| C. | 10 cm |
| D. | 12 cm |
| Answer» D. 12 cm | |
| 73. |
Quality characteristics which are related to only conforming or non-conforming products,are called___ |
| A. | Attributes |
| B. | Variables |
| C. | Continuous characteristics |
| D. | None of the above |
| Answer» B. Variables | |
| 74. |
The observations are given that 11, 12, 14, 15, 17, 18 so what is the value of variance forobservation 12? |
| A. | 0 |
| B. | -2.5 |
| C. | 2.5 |
| D. | None of the above |
| Answer» C. 2.5 | |
| 75. |
The nominal size of brick shall be ________ |
| A. | 19 x 9 x 9 cm |
| B. | 20 x 10 x 10 cm |
| C. | 19 x 9 x 4 cm |
| D. | 20 x 10 x 4 cm |
| Answer» C. 19 x 9 x 4 cm | |
| 76. |
The minimum width of the main entrance at residential door shall be _____ |
| A. | 800 mm |
| B. | 900 mm |
| C. | 1000 mm |
| D. | 1200 mm |
| Answer» D. 1200 mm | |
| 77. |
Which of the following objective is not for SPC. |
| A. | Collecting data |
| B. | Controlling of performances |
| C. | Predicting future tendencies |
| D. | None of the above |
| Answer» E. | |
| 78. |
Foundation, Pillars & the top three proposed in which TQM model? |
| A. | Building blocks of TQM |
| B. | The house of TQM |
| C. | Driving forces of TQM |
| D. | Organization Structure of TQM |
| Answer» B. The house of TQM | |
| 79. |
A collection of many items is called ____ |
| A. | Item |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» C. Sample size | |
| 80. |
Which rating star is given by GRIHA for points between 71 – 80? |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» D. 4 | |
| 81. |
Full form of IGBC is that___ |
| A. | International Green Building Council |
| B. | International Green Building Control |
| C. | Indian Green Building Council |
| D. | Indian Green Building Control |
| Answer» D. Indian Green Building Control | |
| 82. |
Which of the following measures are included spread? |
| A. | Range |
| B. | Standard deviation |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 83. |
Variables also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 84. |
Which of the following methods of statistical quality control? |
| A. | Frequency distribution |
| B. | Control chart |
| C. | Acceptance sampling |
| D. | All of the above |
| Answer» E. | |
| 85. |
Which of the following activities are not included in quality assurance? |
| A. | Reliability |
| B. | Ductility |
| C. | Durability |
| D. | Safety |
| Answer» C. Durability | |
| 86. |
Zaire proposed "Building blocks of TQM" in which year ? |
| A. | 1990 |
| B. | 1991 |
| C. | 1992 |
| D. | 1993 |
| Answer» C. 1992 | |
| 87. |
Bricks absorbing more than _____ water should be rejected |
| A. | 20% |
| B. | 22% |
| C. | 25% |
| D. | 15% |
| Answer» D. 15% | |
| 88. |
Who's suggested PDCA cycle? |
| A. | Shewhart |
| B. | Deming |
| C. | Newton |
| D. | Juran |
| Answer» C. Newton | |
| 89. |
The process of comparing any dimension with its true value is known as ________ |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» D. Least count | |
| 90. |
For fineness of cement test weight of cement retained should not be more than______ |
| A. | 15 % OPC & 10%RHC |
| B. | 10 % OPC & 5%RHC |
| C. | 5 % OPC & 10%RHC |
| D. | 10 % OPC & 15%RHC |
| Answer» C. 5 % OPC & 10%RHC | |
| 91. |
What is the sampling fraction is that for lot of bricks 500, a sample of 10 bricks is taken. |
| A. | 1/500 |
| B. | 1/50 |
| C. | 1/5 |
| D. | 1 |
| Answer» C. 1/5 | |
| 92. |
Which of the following standard is considered good for business practices? |
| A. | ISO 9000 series |
| B. | IS 14000 series |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 93. |
Which of the following is not an environment benefit for a green building? |
| A. | To reduce use of water |
| B. | Reduce solid waste |
| C. | Decrease air quality |
| D. | None of the above |
| Answer» D. None of the above | |
| 94. |
__________denotes the Closeness of a measurement to its true value. |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» B. Precision | |
| 95. |
The capacity of any instrument to take minimum measurement is called its _______ |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» E. | |
| 96. |
What is the meaning of EMS? |
| A. | Environmental Management Systems |
| B. | Environmental Monitoring Systems |
| C. | Environmental Management Standards |
| D. | Environmental Monitoring Standards |
| Answer» B. Environmental Monitoring Systems | |
| 97. |
Concept of Quality Control depends on |
| A. | Quality Control |
| B. | Quality Assurance |
| C. | Quality Management |
| D. | All the above |
| Answer» E. | |
| 98. |
Which of the following elements should be used optimum to make a green building? |
| A. | Agni |
| B. | Jal |
| C. | Prithvi |
| D. | All of the above |
| Answer» E. | |
| 99. |
Attributes also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» B. Continuous data | |
| 100. |
In which of the following factor does not affecting for quality control. |
| A. | Skill of workers |
| B. | does not Supervision standards |
| C. | Quality control plan |
| D. | None of the above |
| Answer» C. Quality control plan | |