MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 155 Mcqs, each offering curated multiple-choice questions to sharpen your Mongodb knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the following benefit is for green building material? |
| A. | Lower cost |
| B. | Reduced maintenance cost |
| C. | Greater design flexibility |
| D. | All of the above |
| Answer» E. | |
| 2. |
Full form of SPC is ____ |
| A. | Standard Process Control |
| B. | Statistical Process Common |
| C. | Statistical Process Control |
| D. | Standard Process Common |
| Answer» D. Standard Process Common | |
| 3. |
Storage of cement bags should be kept______ away from walls. |
| A. | 20 cm |
| B. | 30 cm |
| C. | 40 cm |
| D. | 10 cm |
| Answer» C. 40 cm | |
| 4. |
GRIHA has been prepared by ___ |
| A. | USGBC |
| B. | TERI |
| C. | LEED |
| D. | None of the above |
| Answer» C. LEED | |
| 5. |
Which of the following objectives are for statistical quality control. |
| A. | Reduced inspection cost |
| B. | Better quality assurance |
| C. | To take corrective measure |
| D. | All of the above |
| Answer» E. | |
| 6. |
In a group of similar items, any one item is called___ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» C. Variables | |
| 7. |
Full form of QCIP |
| A. | Quantity Control Inspection Program |
| B. | Quality Control Inspection Programing |
| C. | Quality Control Ideal Program |
| D. | Quality Control Inspection Program |
| Answer» E. | |
| 8. |
Which of the following is not a green building component? |
| A. | Water efficiency |
| B. | Design efficiency |
| C. | Material efficiency |
| D. | None of the above |
| Answer» E. | |
| 9. |
In school, hospitals, offices the wall openings shall be atleast _____ of the floor area. |
| A. | 10% |
| B. | 15% |
| C. | 20% |
| D. | 25% |
| Answer» D. 25% | |
| 10. |
When LEED was launched in india? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» B. 2008 | |
| 11. |
What is the initial setting time & final setting time of cement? |
| A. | 30 minutes & 600 minutes |
| B. | 45 minutes & 600 minutes |
| C. | 30 minutes & 450 minutes |
| D. | 60 minutes & 300 minutes |
| Answer» B. 45 minutes & 600 minutes | |
| 12. |
Which of the following techniques are for statistical process control. |
| A. | Check list |
| B. | Scatter diagram |
| C. | Pareto diagram |
| D. | All of the above |
| Answer» E. | |
| 13. |
Indian equivalence of ISO 9000 is ___ |
| A. | IS 14000 |
| B. | ISO 14000 |
| C. | IS 14002 |
| D. | IS 14003 |
| Answer» B. ISO 14000 | |
| 14. |
Which of the following is not quality system document for getting the ISO 9000 certificate? |
| A. | Quality manual & Procedures |
| B. | Work instruction |
| C. | Quality records |
| D. | None of the above |
| Answer» E. | |
| 15. |
While compacting the concrete by a mechanical vibrator , the slump should not exceed |
| A. | 2.5 cm |
| B. | 7.5 cm |
| C. | 5.0 cm |
| D. | 10 cm |
| Answer» D. 10 cm | |
| 16. |
In machine mixing gap between drum & blades shall not be more than ____ |
| A. | 20 mm |
| B. | 30 mm |
| C. | 15 mm |
| D. | 25 mm |
| Answer» E. | |
| 17. |
Which of the following diagram is represent relationship between causes & effect. |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Histogram |
| D. | Pareto diagram |
| Answer» B. Scatter diagram | |
| 18. |
Which of the following is not an economic benefit for a green building? |
| A. | 20 – 30 % energy used |
| B. | 20 – 30 % less water used |
| C. | Enhance asset value |
| D. | None of the above |
| Answer» E. | |
| 19. |
Which of the following ISO 14000 benefits are? |
| A. | Improve cost control |
| B. | Limit liability |
| C. | Protect human health |
| D. | All of the Above |
| Answer» E. | |
| 20. |
Which of the following steps Juran gives for Quality Control. |
| A. | Evaluate actual operating performance |
| B. | Compare actual performance to goals |
| C. | Act on the difference |
| D. | All of the above |
| Answer» E. | |
| 21. |
First class bricks should not absorb more than ____% water |
| A. | 15.00% |
| B. | 20.00% |
| C. | 25.00% |
| D. | 18.00% |
| Answer» C. 25.00% | |
| 22. |
C & E diagram is given by___. |
| A. | Dr. Ishikawa |
| B. | Dr. Joseph Juran |
| C. | Vilfredo Pareto |
| D. | Dr. Mark Crossby |
| Answer» B. Dr. Joseph Juran | |
| 23. |
When GRIHA was launched in India? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» C. 2010 | |
| 24. |
Area=(h1+h2+h3+....hn ) d calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson's rule |
| Answer» B. Average ordinate rule | |
| 25. |
Area= (h0 +h1 +h2 +h3 +....hn) (n+1) × nd Calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson's rule |
| Answer» C. Trapezoidal rule | |
| 26. |
Why we should refer NBC for. |
| A. | For structural design |
| B. | To know acoustics standards |
| C. | For implementation of building bye laws |
| D. | All of the above |
| Answer» E. | |
| 27. |
ADARSH means___ |
| A. | Association for Design and Research of Sustainable Habitas |
| B. | Association for Development and Rating of Sustainable Habitas |
| C. | Association for Development and Research of Sustainable Habitas |
| D. | Association for Design and Rating of Sustainable Habitas |
| Answer» D. Association for Design and Rating of Sustainable Habitas | |
| 28. |
When record show only the number of, called ___ |
| A. | Attributes |
| B. | Variables |
| C. | Both A and B |
| D. | None of the above |
| Answer» B. Variables | |
| 29. |
12.3056 number has how many significant figures? |
| A. | 2 |
| B. | 6 |
| C. | 3 |
| D. | 4 |
| Answer» C. 3 | |
| 30. |
Which of the following measures are not included in central tendency? |
| A. | Range & Standard deviation |
| B. | Mean, Median & Mode |
| C. | Both A and B |
| D. | None of the above |
| Answer» B. Mean, Median & Mode | |
| 31. |
Which of the following standard is used for Environmental Management Systems |
| A. | ISO 14001 |
| B. | ISO 14004 |
| C. | Both A and B |
| D. | None of the Above |
| Answer» D. None of the Above | |
| 32. |
As per I.S size of standard brick should be _______ |
| A. | 19 x 9 x 9 cm |
| B. | 20 x 10 x 10 cm |
| C. | 19 x 9 x 4 cm |
| D. | 20 x 10 x 4 cm |
| Answer» B. 20 x 10 x 10 cm | |
| 33. |
Which of the following type of chart is to systematic way of recording data? |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Check list |
| D. | Pareto diagram |
| Answer» D. Pareto diagram | |
| 34. |
Instrument used for setting out right angles are |
| A. | Cross staff |
| B. | Optical square |
| C. | Prism square |
| D. | All the above |
| Answer» E. | |
| 35. |
Which one is not sources of errors? |
| A. | Instrumental Errors |
| B. | Personal Errors |
| C. | Calculated Errors |
| D. | Natural Errors |
| Answer» D. Natural Errors | |
| 36. |
A common source from which all units are obtained is called____ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» B. Unit | |
| 37. |
Which of the following company may applied for ISO 9001 certificate? |
| A. | Civil Structural |
| B. | Fertilizers |
| C. | Building material |
| D. | All of the above |
| Answer» B. Fertilizers | |
| 38. |
Pareto diagram is given by ___ |
| A. | Dr. Ishikawa |
| B. | Dr. Joseph Juran |
| C. | Vilfredo Pareto |
| D. | Dr. Mark Crossby |
| Answer» D. Dr. Mark Crossby | |
| 39. |
__________of a measurement denotes its closeness to another measurement of the samequality. |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» C. Calibration | |
| 40. |
Which of the following activities are given in SQC techniques. |
| A. | Analyzing data |
| B. | Systematic collection of data |
| C. | Management action |
| D. | All of the above |
| Answer» E. | |
| 41. |
Which of the following ISO 9000 parts has applicable to only design control? |
| A. | ISO 9001 |
| B. | ISO 9002 |
| C. | ISO 9003 |
| D. | ISO 9004 |
| Answer» B. ISO 9002 | |
| 42. |
Which of the following points has not be covered in ISO 9003 ? |
| A. | Contract review |
| B. | Inspection and testing |
| C. | Quality records |
| D. | None of the above |
| Answer» E. | |
| 43. |
LCA associated with a___ |
| A. | Product |
| B. | Process |
| C. | Service |
| D. | All of the above |
| Answer» E. | |
| 44. |
Which of following does not represented quality? |
| A. | Strength |
| B. | Durability |
| C. | Test results |
| D. | All of the above |
| Answer» D. All of the above | |
| 45. |
In frequency distribution method is find only ____ |
| A. | Variations |
| B. | Frequency |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 46. |
Which of the following IS code use for masonry construction? |
| A. | IS : 456 Masonry Construction |
| B. | IS : 1905 Masonry Construction |
| C. | IS : 800 Masonry Construction |
| D. | IS : 875 Masonry Construction |
| Answer» C. IS : 800 Masonry Construction | |
| 47. |
Which is a good formwork? |
| A. | Easy Removal |
| B. | Economical |
| C. | Less leakage |
| D. | All of the above |
| Answer» E. | |
| 48. |
In which of the following includes are in civil engineering works for quality control. |
| A. | Testing of materials |
| B. | Inspection of finished work |
| C. | Evaluation of construction method |
| D. | All of the above |
| Answer» E. | |
| 49. |
How many set of criteria formulated by GRIHA for rating the building? |
| A. | 31 |
| B. | 32 |
| C. | 33 |
| D. | 34 |
| Answer» E. | |
| 50. |
Proposed "The house of TQM models” in which year? |
| A. | 1990 |
| B. | 1991 |
| C. | 1992 |
| D. | 1993 |
| Answer» E. | |