Explore topic-wise MCQs in Electronics and Telecommunication Engineering [ENT.

This section includes 210 Mcqs, each offering curated multiple-choice questions to sharpen your Electronics and Telecommunication Engineering [ENT knowledge and support exam preparation. Choose a topic below to get started.

101.

Which of the following is not an advantage of spread spectrum channel sounding system?

A. Real time
B. Rejection of passband noise
C. Coverage range improvement
D. Less transmitter power required
Answer» B. Rejection of passband noise
102.

Verify True or False A. Impulse response is a narrowband characterization. B.Impulse response does not play any role in characterization of the channel.

A. Both Statements True
B. Both Statements False
C. Only A true
D. Only B true
Answer» C. Only A true
103.

Which of the following is the world’s first cellular system to specify digital modulation and network level architecture?

A. GSM
B. AMPS
C. CDMA
D. IS-54
Answer» B. AMPS
104.

Which of the following memory device stores information such as subscriber’s identification number in GSM?

A. Register
B. Flip flop
C. SIM
D. SMS
Answer» D. SMS
105.

Who set the standards of GSM?

A. ITU
B. AT & T
C. ETSI
D. USDC
Answer» D. USDC
106.

Which of the following does not come under subsystem of GSM architecture?

A. BSS
B. NSS
C. OSS
D. Channel
Answer» E.
107.

Which of the following subsystem provides radio transmission between mobile station and MSC?

A. BSS
B. NSS
C. OSS
D. BSC
Answer» B. NSS
108.

____ manages the switching function in GSM.

A. BSS
B. NSS
C. OSS
D. MSC
Answer» C. OSS
109.

______ supports the operation and maintenance of GSM.

A. BSS
B. NSS
C. OSS
D. MSC
Answer» D. MSC
110.

Which modulation technique is used by GSM?

A. GMSK
B. BPSK
C. QPSK
D. GFSK
Answer» B. BPSK
111.

Which one is not a TDMA standard of second generation networks?

A. GSM
B. IS-136
C. AMPS
D. PDC
Answer» D. PDC
112.

Which is one of the disadvantages of 2G standards?

A. Short Messaging Service (SMS)
B. Digital modulation
C. Limited capacity
D. Limited Internet Browsing
Answer» E.
113.

The 2G GSM technology uses a carrier separation of _______

A. 1.25 MHz
B. 200 KHz
C. 30 KHz
D. 300 KHz
Answer» C. 30 KHz
114.

What is the basic service unit of GSM communications?

A. Location Area
B. Cell
C. OLMN Service Area
D. MSC / VLR Service Area
Answer» C. OLMN Service Area
115.

GSM stands for...

A. Group Spécial Mobile
B. Global System for Mobile Communications
C. Great Streaming of Media
D. Global Standard of Mobile Communications
Answer» C. Great Streaming of Media
116.

GSM is an example of

A. TDMA cellular systems
B. FDMA cellular systems
C. CDMA cellular systems
D. SDMA cellular systems
Answer» B. FDMA cellular systems
117.

What is the air interface between the Mobile Station (MS) and Base Transceiver Station (BTS) called?

A. Um
B. Abis
C. A
D. HLR
Answer» B. Abis
118.

The first cellular systems were....

A. Analogue
B. Digital
C. Carrier waves
D. Modulating waves
Answer» B. Digital
119.

The Base Station Subsystem (BSS) comprises of what?

A. The Base System Transcontroller and Base Station Condenser
B. The Base Transceiver Station and Base Station Controller
C. The Base Transcript System and Base System Computer
D. The Transfer Station and Base Station Computer
Answer» C. The Base Transcript System and Base System Computer
120.

The Base Station Controller (BSC) communicates with the Base Transceiver Station (BTS) over what interface?

A. Hertz
B. Tx / Rx
C. Abis
D. Cbit
Answer» D. Cbit
121.

A duplex transmission is realized in 2G GSM with the help of ……..

A. FDD
B. TDD
C. a and b
D. None of the above
Answer» B. TDD
122.

FDD stands for ……..

A. Frequency Division Duplex
B. Full Division Duplex
C. Frequency Double Duplex
D. Frequency Duplex Division
Answer» B. Full Division Duplex
123.

What is the interface between the BSS and MSC?

A. Um
B. Abis
C. A
D. None of the above
Answer» D. None of the above
124.

 2G standards support

A. Limited internet browsing
B. Short Messaging Service
C. Both a & b
D. None of the above
Answer» D. None of the above
125.

SIM stands for....

A. Serial Identity Master
B. Subscriber Interface Marker
C. Subscriber Identity Module
D. System Interface Module
Answer» D. System Interface Module
126.

GSM system is a …………..system.

A. Frequency division
B. Time Division
C. CDMA
D. a and b
Answer» E.
127.

GSM system includes……..frequency bands.

A. 900MHz
B. 1800MHz
C. a and b
D. None of the above
Answer» D. None of the above
128.

PSTN stands for……

A. Public System Telephone Network
B. Public Security Telephone Network
C. Public Switched Telephone Network
D. Public System Telecommunication Network
Answer» D. Public System Telecommunication Network
129.

ISDN stands for……

A. Integrated Services Digital Network
B. Integrated System Digital Network
C. Integrated Services Data Network
D. Integrated System Data Network
Answer» B. Integrated System Digital Network
130.

Uplink means communication link from

A. BS to MS
B. MS to BS
C. MS to MS
D. BS to BS
Answer» C. MS to MS
131.

Downlink means communication link from

A. BS to MS
B. MS to BS
C. MS to MS
D. BS to BS
Answer» B. MS to BS
132.

AMPS stands for

A. Advanced Mobile Phone Switching
B. Advanced Mobile Phone System
C. Accesed Mobile Phone System
D. Advanced Mobility Phone Switching
Answer» C. Accesed Mobile Phone System
133.

GMSC is

A. Guided Mobile Service Switching Center
B. Gateway Mobile Service Switching Center
C. Gateway Mobile Service Switching Controller
D. Guided Mobile Service Switching Controller
Answer» C. Gateway Mobile Service Switching Controller
134.

AMPS is used in

A. 1G
B. 2G
C. 3G
D. 4G
Answer» B. 2G
135.

GPRS technology was introduced in

A. 2G
B. 2.5G
C. 3G
D. 4G
Answer» B. 2.5G
136.

GPRS stands for

A. Group Packet Radio Service
B. Group Packet Radio System
C. General Processing Radio Service
D. General Packet Radio Service
Answer» E.
137.

Which functional block in GSM architecture,consists of the radio transmitters and receivers circuits and their associated antennas?

A. BTS
B. BSC
C. MSC
D. GMSC
Answer» B. BSC
138.

Which functional block in GSM architecture, allocates radio resourses to a mobile call and for handovers?

A. BTS
B. BSC
C. MSC
D. GMSC
Answer» C. MSC
139.

Which functional block in GSM architecture is responsible for necessary switching functions required for MSs located in an associated geographical area?

A. BTS
B. BSC
C. MSC
D. BSS
Answer» D. BSS
140.

………………provides MS information used by MSC and maintains a list of legitimate,fraudulent or faulty MSs.

A. AUC
B. EIR
C. HLR
D. VLR
Answer» C. HLR
141.

……….. Is the database that allows checking of the user with assigned SIM card.

A. AUC
B. EIR
C. HLR
D. VLR
Answer» B. EIR
142.

……recognizes that the MS is from another PLMN when roaming is allowed.

A. AUC
B. EIR
C. HLR
D. VLR
Answer» E.
143.

…….stores the subscrier information and part of mobile information from home PLMN.

A. AUC
B. EIR
C. HLR
D. VLR
Answer» D. VLR
144.

IMEI stands for

A. Integrated Master Equipment Identity
B. International Mobile Equipment Identity
C. International Master Equipment Identifier
D. Interlinked Mobile Environment Interface
Answer» C. International Master Equipment Identifier
145.

IMSI stands for....

A. Integrated Master Subscriber Identity
B. International Master System Interface
C. International Mobile Subscriber Identity
D. Interlinked Mobile Systems Identifier
Answer» D. Interlinked Mobile Systems Identifier
146.

The IMEI can be found by entering what on the handset keypad?

A. #6*0#
B. *#06#
C. 06#*#
D. 6#*0#
Answer» C. 06#*#
147.

In GSM-900 system, total number of radio carriers are……………

A. 120
B. 124
C. 125
D. 200
Answer» C. 125
148.

In GSM-900 system, two subbands of ………..are assigned.

A. 200kHz
B. 20kHz
C. 20 MHz
D. 25 MHz
Answer» E.
149.

In GSM-900 system, downlink frequency is ……………

A. 895MHz-920MHz
B. 880MHz-905MHz
C. 885MHz-910MHz
D. 890MHz-915MHz
Answer» E.
150.

In GSM-900 system, uplink and downlink carrier frequency differ by ……………

A. 20MHz
B. 45MHz
C. 25MHz
D. 200kHz
Answer» C. 25MHz