Explore topic-wise MCQs in Rocket Propulsion.

This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Rocket Propulsion knowledge and support exam preparation. Choose a topic below to get started.

1.

Heat generation in the first zone of the atomization region is relatively low because of ________

A. liquids and gases are relatively hot
B. vaporization causing a cooling effect
C. vaporization causing fuel-rich and fuel-lean regions
D. low flow velocity in the injector zone
Answer» D. low flow velocity in the injector zone
2.

The atomization region before the rapid combustion zone is _______

A. homogenous
B. heterogeneous
C. isentropic
D. isothermal
Answer» C. isentropic
3.

Evaporation of the atomized droplets can happen due to heat transferred by ________

A. radiation from rapid combustion zone, but not by convection from moderately hot gases in the first zone
B. radiation from rapid combustion zone and by convection from moderately hot gases in the first zone
C. convection from moderately hot gases in the first zone, but not by radiation from rapid combustion zone
D. neither radiation from rapid combustion zone nor by convection from moderately hot gases in the first zone
Answer» C. convection from moderately hot gases in the first zone, but not by radiation from rapid combustion zone
4.

Propellants injected through the injector orifices travel at velocities between _______

A. 0 and 22 m/s
B. 7 and 60 m/s
C. 23 and 98 m/s
D. 105 and 320 m/s
Answer» C. 23 and 98 m/s
5.

The liquid droplets that remains in the upstream portion of rapid combustion zone do not transverse downstream with ease.

A. True
B. False
Answer» B. False
6.

The mixing in rapid combustion zone is not aided by ___________

A. local turbulence
B. diffusion of the gas species
C. supersonic compression waves
D. vaporization of the liquid propellants
Answer» D. vaporization of the liquid propellants
7.

In which of the zones does any remaining liquid droplets of the propellants get vaporized by convective heating?

A. Rapid combustion zone
B. Stream tube combustion zone
C. Transonic-flow zone
D. Supersonic expansion zone
Answer» B. Stream tube combustion zone
8.

Which of the following with regards to mixing and reaction in the combustion chamber is incorrect?

A. Turbulent mixing
B. Multiple chemical reactions
C. Temperature rise increases densities
D. Local mixture ratio variations
Answer» D. Local mixture ratio variations
9.

The boundaries between the discrete combustion zones inside the combustion chamber is not ________

A. undulating
B. immovable
C. irregular
D. local variations
Answer» C. irregular
10.

Which of the following zones is not a part of the thrust chamber?

A. Atomization zone
B. Rapid-combustion zone
C. Stream tube combustion zone
D. Transonic flow zone
Answer» B. Rapid-combustion zone