

MCQOPTIONS
Saved Bookmarks
This section includes 66 Mcqs, each offering curated multiple-choice questions to sharpen your Internet of things (IoT) knowledge and support exam preparation. Choose a topic below to get started.
1. |
_________ does not provide reliable end to end communication. |
A. | TCP |
B. | UDP |
C. | Both TCP and UDP |
D. | Neither TCP nor UDP |
Answer» C. Both TCP and UDP | |
2. |
___________ adjusts the segment size to be smaller than MTU. |
A. | Internet Protocol 6 |
B. | User Datagram Protocol |
C. | Internet Protocol 4 |
D. | Transmission Control Protocol |
Answer» E. | |
3. |
FCP stands for _________ |
A. | Fiber Channel Protocol |
B. | Field Channel Protocol |
C. | Fast Channel Protocol |
D. | Fiber Carrying Protocol |
Answer» B. Field Channel Protocol | |
4. |
XMPP feature such as federation across domains used to implement the Internet of Things. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
5. |
The architecture of the XMPP network is similar to __________ |
A. | Chat box |
B. | Web browser |
C. | Gaming |
D. | |
Answer» E. | |
6. |
How many version /s of IP’s are there? |
A. | 4 versions |
B. | 3 versions |
C. | 2 versions |
D. | 1 version |
Answer» D. 1 version | |
7. |
What is the wireless system used by dell? |
A. | WAN |
B. | WWAN |
C. | HAN |
D. | MAN |
Answer» C. HAN | |
8. |
IoT gateway sits at the interaction of egde systems. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
9. |
IEEE stands for Institute of Electrical and Electronics Engineers. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
10. |
Transport layer receives data in the form of __________ |
A. | Packets |
B. | Byte streams |
C. | Bits stream |
D. | Both packets and Byte stream |
Answer» C. Bits stream | |
11. |
What are the functions of the transport layer? |
A. | Multiplexing/ Demultiplexing |
B. | Connection less Services |
C. | Connection oriented service |
D. | Congestion control |
Answer» B. Connection less Services | |
12. |
XMPP uses ________ architecture. |
A. | Decentralized client-server |
B. | Centralized client-server |
C. | Message |
D. | Public/subscriber |
Answer» B. Centralized client-server | |
13. |
Transport layer is which layer in OSI model? |
A. | Fourth layer |
B. | Third layer |
C. | Second layer |
D. | Fifth layer |
Answer» B. Third layer | |
14. |
Congestion control can control traffic entry into a telecommunications network, so to avoid _________ |
A. | Congestive connection |
B. | Connection collapse |
C. | Congestive collapse |
D. | Collapse congestive |
Answer» D. Collapse congestive | |
15. |
The design of the Internet protocol suites adhere to the ________ principle. |
A. | Data corruption |
B. | Connection oriented |
C. | End to End principle |
D. | Reliability |
Answer» D. Reliability | |
16. |
In which cases gateway will appear? |
A. | Industrial Automation |
B. | Building automation |
C. | Transportation |
D. | Industrial & Building Automation |
Answer» E. | |
17. |
Wind River Intelligent Device offers what? |
A. | Gateway security |
B. | Application enablement |
C. | Device Connectivity |
D. | All of the mentioned |
Answer» E. | |
18. |
IP is connectionless. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
19. |
The feature of IoT Gateway is the ability to download updates over-the-air. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
20. |
MAC addresses are used as ________ |
A. | Network addresses |
B. | IP address |
C. | Hardware address |
D. | Burned in address |
Answer» B. IP address | |
21. |
AMQP stands for ____________ |
A. | Advanced Message Queuing Protocol |
B. | Application Message Queuing Protocol |
C. | Advanced Mailing Queuing Protocol |
D. | Application Mailing Queuing Protocol |
Answer» B. Application Message Queuing Protocol | |
22. |
XMPP have text based communication. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
23. |
Which is the I2C messaging example? |
A. | 24c32 EPROM |
B. | 24c32 EEPROM |
C. | 24c33 EEPROM |
D. | 24c33 EPROM |
Answer» C. 24c33 EEPROM | |
24. |
In idle line multiprocessor mode, a precise idle period can be generated to create efficient address character identifiers. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
25. |
In synchronous operation characters must be provided on time if not ______ error occurs. |
A. | Overrun error |
B. | Underrun error |
C. | Framing error |
D. | Parity error |
Answer» C. Framing error | |
26. |
USART provides a synchronous mode that is not in UART. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
27. |
Transport layer can identify the symptoms of overload nodes using _________ |
A. | Flow control |
B. | Traffic control |
C. | Byte orientation |
D. | Data integrity |
Answer» C. Byte orientation | |
28. |
Where the edge gateway sits in dell? |
A. | Near the system |
B. | End of the system |
C. | End of the devices |
D. | Near the devices |
Answer» E. | |
29. |
SPI have/has a single master. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
30. |
How many types of addressing structures are there in I2C? |
A. | 4 types |
B. | 3 types |
C. | 2 types |
D. | 5 types |
Answer» D. 5 types | |
31. |
Which of the following is the disadvantage in SPI? |
A. | Full duplex communication |
B. | Push pull drivers |
C. | Unidirectional signals |
D. | More pins |
Answer» E. | |
32. |
Which of the following is an advantage of SPI? |
A. | No start and stop bits |
B. | Use 4 wires |
C. | Allows for single master |
D. | Error checking is not present |
Answer» B. Use 4 wires | |
33. |
MISO means _________ |
A. | Line for master to send data to the slave |
B. | Line for the slave to send data to the master |
C. | Line for the clock signal |
D. | Line for the master to select which slave to send data to |
Answer» C. Line for the clock signal | |
34. |
CoAP feels very much like HTTP. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
35. |
HART stands for_________ |
A. | Highway Addressable Remote Transducer |
B. | High Addressable Remote Transducer |
C. | High Application Remote Transducer |
D. | Highway Application Remote Transducer |
Answer» B. High Addressable Remote Transducer | |
36. |
Which of the following is the type of SPI controller? |
A. | Queued SPI |
B. | Microwire |
C. | Microwire/plus |
D. | Quad SPI |
Answer» B. Microwire | |
37. |
__________ is a predecessor of SPI. |
A. | Queued SPI |
B. | Microwire |
C. | Microwire/plus |
D. | Quad SPI |
Answer» C. Microwire/plus | |
38. |
Do we have a protection in Dell. |
A. | Yes |
B. | No |
C. | Can't say |
D. | None of these |
Answer» B. No | |
39. |
Which bit in control register defines the address bit or idle line multiprocessor protocol mode? |
A. | MM |
B. | URXWIE |
C. | URXIE |
D. | RXWake |
Answer» B. URXWIE | |
40. |
Types of gateway classes? |
A. | Only one |
B. | 3 types |
C. | 2 types |
D. | 4 types |
Answer» D. 4 types | |
41. |
XMPP implementation uses ________ |
A. | CoAP |
B. | Gaming |
C. | |
D. | Polling |
Answer» E. | |
42. |
Application layer interacts directly with the ________ |
A. | front user |
B. | end user |
C. | sensors |
D. | wired link |
Answer» C. sensors | |
43. |
The original IEEE 802 MAC address comes from________ |
A. | MAC address |
B. | IP address |
C. | Ethernet address |
D. | Http |
Answer» D. Http | |
44. |
Which mode assumes that it is the gateway’s responsibility to connect to the central repository server? |
A. | Factory Bootstrap |
B. | Server limited Bootstrap |
C. | Client Initiated Bootstrap |
D. | Bootstrap |
Answer» D. Bootstrap | |
45. |
Network layer in TCP/IP and OSI Model are same. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» C. May be True or False | |
46. |
NEXCOM provides what? |
A. | OS |
B. | IoT gateway |
C. | Devices |
D. | Transportation |
Answer» C. Devices | |
47. |
Which error occurs when UART transmitter has completed sending a character and the transmit buffer is empty? |
A. | Overrun error |
B. | Underrun error |
C. | Framing error |
D. | Break condition |
Answer» C. Framing error | |
48. |
SPI have internal flash. |
A. | True |
B. | False |
C. | May be True or False |
D. | Can't say |
Answer» B. False | |
49. |
Which error occurs when the designated start and stop bits are not found? |
A. | Overrun error |
B. | Underrun error |
C. | Framing error |
D. | Break condition |
Answer» D. Break condition | |
50. |
Which level is the network layer in the OSI model? |
A. | Third level |
B. | Fourth level |
C. | Second level |
D. | Fifth layer |
Answer» B. Fourth level | |