Explore topic-wise MCQs in Mongodb.

This section includes 139 Mcqs, each offering curated multiple-choice questions to sharpen your Mongodb knowledge and support exam preparation. Choose a topic below to get started.

101.

The plasticity of clay depends on which of the following?

A. The nature of clay minerals present
B. Volume of clay present
C. All of the mentioned
D. None of the mentioned
Answer» B. Volume of clay present
102.

Collapsible soils undergoes large decrease in volume due to __________

A. Decrease in moisture content
B. Increase in moisture content
C. Increase in solubility
D. None of the mentioned
Answer» C. Increase in solubility
103.

The principle of submerged mass density method is_______

A. Equilibrium of floating bodies
B. Stroke’s law
C. Archimedes’ principle
D. Darcy’s law
Answer» D. Darcy’s law
104.

A particle-size distribution curve gives us an idea about __________

A. Type of soil
B. Properties of soil
C. All of the mentioned
D. None of the mentioned
Answer» B. Properties of soil
105.

Which of the following apparatus does not include, in a determination of shrinkage limit?

A. Porcelain evaporating dish
B. Two glass plates
C. Brass cup
D. Stainless steel shrinking dish
Answer» D. Stainless steel shrinking dish
106.

Which of the following are used as a standard sedimentation method in a laboratory?

A. Sedimentation analysis method
B. Hydrometer method
C. Pipette method
D. Sand replacement method
Answer» D. Sand replacement method
107.

The D10 represents a size, such that _________ of the particles are finer than this size.

A. 20%
B. 60%
C. 10%
D. 100%
Answer» D. 100%
108.

Which of the following is not considered as one of the state, as divided by Atterberg?

A. Solid state
B. Gaseous state
C. Semi-solid state
D. Liquid state
Answer» C. Semi-solid state
109.

The shape of the particle size curve is represented by _________

A. Effective size
B. Effective diameter
C. Uniform coefficient
D. Co-efficient of curvature
Answer» E.
110.

Based on the observation made by Skempton, for a given soil __________

A. Plastic index is proportional to percent of clay-size fraction
B. Plastic index is inversely proportional to percent of clay-size fraction
C. Plastic index is equal to percent of clay-size fraction
D. None of the mentioned
Answer» B. Plastic index is inversely proportional to percent of clay-size fraction
111.

In sand replacement method, if the mass of sand filling the calibrating container is 1450g and volume of calibrating container is 1000cm³, then its buk density is_______ g/cm³.

A. 1450
B. 1.45
C. 45
D. 17
Answer» C. 45
112.

For calibration of cylinder _______ is used.

A. Gravel
B. Sand
C. Soil
D. Silt
Answer» C. Soil
113.

The capillary potential (CP) of the collapsible soil varies with _________

A. Degree of saturation and Pressure
B. Water content present
C. All of the mentioned
D. None of the mentioned
Answer» B. Water content present
114.

A clay specimen has an unconfined compressive strength of 240 Kn/m² in a distributed state. On remolding, the unconfined compressive strength is 54 Kn/m². What will be the sensitivity of clay?

A. 3.85
B. 7.24
C. 2.04
D. 4.44
Answer» E.
115.

The soil portion passing through 4.75 mm sieve is washed for further sieve analysis.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
116.

The meniscus correction in hydrometer reading is ___________

A. Always positive
B. Always negative
C. Negative sometime
D. Positive sometime
Answer» B. Always negative
117.

The inner diameter of the core cutter is_____ cm.

A. 5
B. 10
C. 13
D. 15
Answer» C. 13
118.

What are the ways of preventing of inclusion of air bubbles in shrinkage dish?

A. Mixing the soil with sufficient distilled water and Making the soil pasty enough
B. Coating the surface with a thin layer of oil
C. All of the mentioned
D. None of the mentioned
Answer» B. Coating the surface with a thin layer of oil
119.

The coefficient of uniformity (CV) is the ratio of _________

A. D60 and D10
B. D30 and D10
C. D10 and D30
D. D10 and D30
Answer» B. D30 and D10
120.

The IS code for determination of dry density by sand replacement method is ________

A. IS 456:2000
B. IS 2720-1975/88 (Part XXIX)
C. IS 2720-1974/88 (Part XXVIII)
D. IS 800
Answer» D. IS 800
121.

Collapsible soils are usually present in areas of __________

A. Semi-arid regions and Arid regions
B. Dry regions
C. All of the mentioned
D. None of the mentioned
Answer» B. Dry regions
122.

The soviet liquid limit device is based on the principle of ___________

A. Station penetration
B. Soil moisture
C. Soil water content
D. None of the mentioned
Answer» B. Soil moisture
123.

The corrected hydrometer reading for meniscus is _________

A. R=Rh’ + Cm
B. R=Rh’ + C
C. R=Rh’+ Cm ± CL – Cd
D. None of the mentioned
Answer» C. R=Rh’+ Cm ± CL – Cd
124.

A soil sample may be well graded if __________

A. If it has most number of particles of same size
B. Excess of certain particles
C. Good representation of particles of all size
D. None of the mentioned
Answer» D. None of the mentioned
125.

The Density of water, used in shrinkage limit test is _________

A. 1 g/cm³
B. 1000 g/cm³
C. 2 g/cm³
D. 1/1000 g/cm³
Answer» B. 1000 g/cm³
126.

In sedimentation analysis, the soil fraction should be of what micron size, so as to be kept in a liquid medium (water).

A. 75
B. 83
C. 57
D. 70
Answer» B. 83
127.

______ method is specially suited to a circumstance where water content is to be quickly determined for the purpose of proper field control.

A. Oven drying
B. Sand bath
C. Alcohol
D. Calcium carbide
Answer» E.
128.

An organic soil sample is kept in oven for its water content determination. The temperature preferred is ______

A. 60°
B. 80°
C. 105°
D. 110°
Answer» B. 80°
129.

In pycnometer method of water content determination, it is necessary to accurately know the specific gravity G of soil whose water content is to be determined.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
130.

In oven drying method, the soil sample is kept for about ______ hours in the oven.

A. 1
B. 2
C. 24
D. 48
Answer» D. 48
131.

The water content of a soil sample cannot be determined by _____ method.

A. oven drying
B. alcohol
C. calcium carbide
D. pipette
Answer» E.
132.

YOU_MAY_NOT_SPECIFY_A_UNIQUE_CONSTRAINT_ON_A________INDEX.?$

A. Hashed
B. Unique
C. Sparse
D. Compound
Answer» B. Unique
133.

Which_of_the_following_indexes_are_always_sparse_?$

A. 2dsphere
B. 2d
C. geoHaystack
D. all of the mentioned
Answer» E.
134.

Which of the following method is to verify whether MongoDB used index intersection ?

A. explain()
B. analyze()
C. intersect()
D. none of the mentioned
Answer» B. analyze()
135.

You can combine the ________ constraint with the sparse index to filter these null values from the unique index and avoid the error.

A. Hashed
B. Unique
C. sparse
D. compound
Answer» D. compound
136.

On replica sets, the TTL background thread only deletes documents on :

A. primary
B. secondary
C. upadte
D. none of the mentioned
Answer» B. secondary
137.

The background task that removes expired documents runs every ________ seconds.

A. 15
B. 45
C. 60
D. 120
Answer» D. 120
138.

When the TTL thread is active, you will see _______ operations in the output of db.currentOp()

A. delete
B. update
C. insert
D. none of the mentioned
Answer» B. update
139.

________ indexes expire documents after the specified number of seconds has passed since the indexed field value.

A. Hashed
B. Unique
C. Multikey
D. TTL
Answer» E.