Explore topic-wise MCQs in Ic Engine.

This section includes 17 Mcqs, each offering curated multiple-choice questions to sharpen your Ic Engine knowledge and support exam preparation. Choose a topic below to get started.

Explore topic-wise MCQs in Ic Engine.

If the engine is overcooled some of the heat which could be used to expand the gases will be lost.

A hot-spot outside the combustion chamber may be sufficient to cause pre-ignition.

Inadequate lubrication of the engine, due to oil not being warm enough to flow freely, results in greater frictional losses.

As the cool mixture is inducted into the engine cylinder the temperature rises rapidly.

At the end of the induction stroke the temperature is that of clearance gases.

Most of the heat is carried away by the cooling system while some are lost by direct radiation from the engine surfaces.

The hot gases give part of their heat to ____________

IF_THE_ENGINE_IS_OVERCOOLED_SOME_OF_THE_HEAT_WHICH_COULD_BE_USED_TO_EXPAND_THE_GASES_WILL_BE_LOST.?$

A hot-spot outside the combustion chamber may be sufficient to cause pre-ignition?

Inadequate lubrication of the engine, due to oil not being warm enough to flow freely, results in greater frictional losses?

During the expansion process the temperature ____________ and then drops very rapidly during the release process.

During compression process the temperature ____________ and attains its maximum value at the end of combustion process.

As the cool mixture is inducted in the engine cylinder the temperature rises rapidly.

At the end of induction stroke the temperature is that of clearance gases.

Most of the heat is carried away by the cooling system while some is lost by direct radiation from the engine surfaces.

The hot gases give part of their heat to

The transfer of heat takes place due to difference in temperature and from higher temperature to lower temperature.