Explore topic-wise MCQs in Power Systems.

This section includes 70 Mcqs, each offering curated multiple-choice questions to sharpen your Power Systems knowledge and support exam preparation. Choose a topic below to get started.

1.

_______ are simple heat exchangers for imparting additional energy to steam for given pressure.

A. Superheaters
B. Economizers
C. Draught systems
D. None of the above
Answer» B. Economizers
2.

Match List – I with List – IIList – IList – IIa. Base load1. nuclear power plantb. Peak load2. dielsel power plant 3. gas power plant

A. 1-a, 2-b, 3-b
B. 1-b, 2-b, 3-b
C. 1-a, 2-b, 3-a
D. 1-a, 2-a, 3-b
Answer» B. 1-b, 2-b, 3-b
3.

Public Sector Undertaking Associated with erection and commissioning of thermal power plants in India is:

A. Bharat Coking Coal Ltd.
B. National Thermal Power Corporation Ltd.
C. Indian Electricity Authority
D. Department of Science and Technology
Answer» C. Indian Electricity Authority
4.

A steam power station has an overall efficiency of 20% and 0.5 kg of coal is burnt per kWh of electrical energy generated. Calculate the calorific value of the fuel. Heat equivalent of 1 kWh is 860 kcal.

A. 8600 kcal/kg
B. 344 kcal/kg
C. 860 kcal/kg
D. 2150 kcal/kg
Answer» B. 344 kcal/kg
5.

If a motor-pump set lifts 100 litres of water through a height of 10 m in 1.5 min, then the output power required by the pump will be (Take 1 lit = 1 kg)

A. 0.109 kW
B. 1.102 kW
C. 0.5 kW
D. 10.9 kW
Answer» B. 1.102 kW
6.

High Head Power Plant has a turbine as a common prime mover.

A. Francis
B. Pelton Wheel
C. Kaplan
D. Kaplan/Pelton Wheel
Answer» C. Kaplan
7.

ISO 3046 (Part 5) establishes that the general requirement for DG set is

A. Torsional vibration
B. Speed
C. Power
D. None of the above
Answer» B. Speed
8.

A diesel power station has fuel consumption of 0.2 kg per kWh. If the calorific value of diesel is 11000 kcal per kg, overall efficiency of power station is

A. 43.3%
B. 65.5%
C. 39.2%
D. 25.6%
Answer» D. 25.6%
9.

Choose the INCORRECT statement with respect to solid fuels and liquid fuels used in power generation.

A. Solid fuels have higher percentage of moisture, and consequently, they burn with great difficulty.
B. Liquid flues require special types of burners for burning.
C. Handling of solid fuels is easier, and they require less storage space.
D. The waste product of solid fuels is a large quantity of ash.
Answer» D. The waste product of solid fuels is a large quantity of ash.
10.

Baseload plants supply power at

A. Low capital cost and low running cost
B. Low capital cost and high running cost
C. High capital cost and high running cost
D. High capital cost and low running cost
Answer» E.
11.

Depreciation charges are high in the case of

A. Thermal plant
B. Diesel plant
C. Hydroelectric plant
D. Wind power plant
Answer» B. Diesel plant
12.

A normal DG Set must be CPCB compliant for noise as below:

A. 75 dB at 1 metre
B. 80 dB at 1 metre
C. 85 dB at 1 metre
D. 90 dB at 1 metre
Answer» B. 80 dB at 1 metre
13.

Operation of following wind turbine is independent of wind direction.

A. Horizontal axis turbine
B. Vertical axis turbine
C. Angular horizontal axis turbine
D. None of the options available
Answer» C. Angular horizontal axis turbine
14.

A diesel power station has fuel consumption of 0.28kg per kWh, the calorific value of fuel being 10, 000 kcal/kg. Determine the overall efficiency

A. 23.5%
B. 50.2%
C. 40.2%
D. 30.7%
Answer» E.
15.

In a hydro – electric power plant, _______ turbine is used for high head and low discharge.

A. Pelton
B. Kaplan
C. Deriaz
D. Francis
Answer» B. Kaplan
16.

For under water movement of a submarine the power is provided by:

A. tidal energy
B. MHD generator
C. batteries
D. Thermionic generator
Answer» D. Thermionic generator
17.

Forced draft fan handling which type of air

A. Cold air
B. Hot air
C. Flue gas only
D. Fresh air
Answer» E.
18.

Capital cost on a nuclear plant is:

A. equal to
B. low
C. Moderate
D. Very high
Answer» E.
19.

Overall thermal efficiency of a steam power station is in the range

A. 18 – 24%
B. 30 – 40%
C. 44 – 62%
D. 68 – 79%
Answer» C. 44 – 62%
20.

In a biogas plant, pH of the slurry is kept between:

A. 4.5-5.5
B. 5.5-6.5
C. 6.5-8.5
D. 8.5-10.5
Answer» D. 8.5-10.5
21.

Calculate the overall efficiency of the steam thermal power plant, if boiler efficiency is 85%, turbine efficiency is 40% and alternator efficiency is 95%

A. 73.3%
B. 32.3%
C. 43.5%
D. 25.3%
Answer» C. 43.5%
22.

Generators with the operating speeds of 3000, 3000 and 300 rpm are appreciate in ________ power plants, respectively.

A. hydro, nuclear and thermal
B. thermal, hydro and nuclear
C. thermal, nuclear and hydro
D. hydro, thermal and nuclear
Answer» D. hydro, thermal and nuclear
23.

Puga Valley in Ladakh is suitable for which of the following power generation?

A. Wind
B. Solar
C. Geothermal
D. All of these
Answer» D. All of these
24.

For the protection of power station buildings against direct strokes the requirements are:

A. Interception and conduction
B. Interception, conduction, and dissipation
C. Interception, conduction, dissipation, and reflection
D. None of these
Answer» C. Interception, conduction, dissipation, and reflection
25.

Penstocks are used in _____ power station.

A. Thermal
B. Nuclear
C. Wind
D. Hydro-electric
Answer» E.
26.

Bus bar temperature rise in a DG Set is proportional to

A. Current (I)
B. Square of current (I2)
C. Voltage (V)
D. All of the above
Answer» C. Voltage (V)
27.

Identify the correct statement regarding a nuclear power plant.

A. Graphite is used as an electrode
B. Graphite is used as a coolant
C. Graphite is used as a moderator
D. Graphite is used as fuel
Answer» D. Graphite is used as fuel
28.

___________ is a tube that brings water to turbines.

A. Spillway
B. Penstock
C. Trash rack
D. Forebay
Answer» C. Trash rack
29.

Choose the correct schematic arrangement of the nuclear power station.

A. A nuclear reactor, heat exchanger, steam turbine, alternator
B. Steam turbine, alternator, heat exchanger, nuclear reactor
C. Steam turbine, heat exchanger, alternator, nuclear reactor
D. Alternator, heat exchanger, nuclear reactor, steam turbine
Answer» B. Steam turbine, alternator, heat exchanger, nuclear reactor
30.

Generators of peak load plants are usually designed for maximum efficiency at

A. Full load
B. 25 to 50% full load
C. 50 to 75% full load
D. 25% overload
Answer» D. 25% overload
31.

___________ are often employed to eliminate dusty air.

A. Industrial fan
B. Exhaust fan
C. Pedestal fan
D. Table fan
Answer» C. Pedestal fan
32.

In the current situation, which of the following fuels is used more in electrical energy generation?

A. Natural gas
B. Coal
C. Nuclear energy
D. Wind energy
Answer» C. Nuclear energy
33.

In hydroelectric power station Kaplan turbine is used for _________.

A. Medium head
B. All of these
C. High head
D. Low head
Answer» E.
34.

According to Betz theory, the maximum possible power coefficient is 16/27 and 59% efficiency is the best conventional wind turbine can do in extracting power from the wind becausea. 100% efficiency is not possible due to fluid mechanics of windb. 100% efficiency can be extracted then the flow of air would be reduced to complete stop and no velocity would remain available to sustain flow through extraction mechanism.

A. a is true, b is false
B. Both a and b are true
C. a is false, b is true
D. Both a and b are false
Answer» C. a is false, b is true
35.

Consider the following statements with respect to thermal power stations. State whether these statements are true or false.(a) They pollute the atmosphere due to the production of a large amount of smoke and fumes.(b) They are costlier in running cost as compared to hydroelectric plants.(c) They require a larger space as compared to hydroelectric power stations for the same capacity of generation.

A. (a) True, (b) True and (c) False
B. (a) False, (b) True and (c) True
C. (a) False, (b) True and (c) False
D. (a) True, (b) True and (c) True
Answer» B. (a) False, (b) True and (c) True
36.

Pollution due to Tidal Energy generation is usually:

A. Zero
B. Low
C. Moderate
D. High
Answer» B. Low
37.

A pulverized coal boiler produces approximately _____ fly ash and ______ bottom ash.

A. 60 %; 40 %
B. 50 %; 50 %
C. 80 %; 20 %
D. 70 %; 30 %
Answer» D. 70 %; 30 %
38.

Economizer is used for

A. superheating the stream
B. pre-heating of the feed water
C. pre-heating the air
D. condensing the exhaust steam of the engine
Answer» C. pre-heating the air
39.

_________ power plant is the plant which uses the non-conventional source of energy.

A. Hydroelectric
B. Thermal
C. Wind
D. Nuclear
Answer» D. Nuclear
40.

P = QHg is the water power equation. Head ‘H’ is measured in meter, ‘g’ gravity constant is measured in meter/second square, then the measuring unit of ‘Q’, flow rate of water is:

A. Meter per hour
B. Meter per second
C. Cubic meter per second
D. Square meter per second
Answer» D. Square meter per second
41.

_____ gas is majorly produced by anaerobic decomposition of human or animal excreta.

A. Methane
B. Carbon dioxide
C. Nitrogen dioxide
D. Ammonia
Answer» B. Carbon dioxide
42.

Compared to turbines in the conventional coal-fired thermal stations, nuclear power plant turbines use steam at

A. higher pressure and higher temperature
B. lower pressure and lower temperature
C. higher pressure and lower temperature
D. lower pressure and higher temperature
Answer» C. higher pressure and lower temperature
43.

In a biogas plant, the dome/gas collector is usually in shape.

A. conical
B. hemispherical
C. cuboidal
D. pyramidal
Answer» C. cuboidal
44.

BEE stands for

A. Board of Energy Efficiency
B. Bureau of Energy Efficiency
C. Branch of Energy Efficiency
D. None of the above
Answer» C. Branch of Energy Efficiency
45.

Comment on the speed of generators of Chandrapur Super Thermal Power Station and Koyana Hydro Power Station.

A. Same speed of both power station generators
B. Chandrapur Super Thermal Power Station generator speed is higher
C. Koyana Hydro Power Station speed is higher
D. Cannot comment
Answer» C. Koyana Hydro Power Station speed is higher
46.

Hydraulic power of a pump is

A. proportional to density of fluid
B. inversely proportional to density of fluid
C. not affected by density of fluid
D. proportional to square of density of fluid
Answer» B. inversely proportional to density of fluid
47.

A modern coal-fired thermal power station consumes about ________ of its power for supplying to the auxiliaries.

A. 10%
B. 40%
C. 20%
D. 30%
Answer» B. 40%
48.

In steam turbine plant, extraction of heat from flue gases to heat feed water of the boiler is done by

A. Air preheater
B. Superheater
C. Economiser
D. Condenser
Answer» D. Condenser
49.

Compared to the salient-pole Hydroelectric generators, the steam and the gas-turbine generators have cylindrical rotors for

A. Better air-circulation in the machine
B. Reducing the eddy-current losses in the rotor
C. Accommodating larger number of terms in the field winding
D. Providing higher mechanical strength against the centrifugal stress
Answer» E.
50.

Flat rate tariff is charged on what basis?

A. Connected load
B. Units consumed
C. Maximum demand
D. Both (a) and (b)
Answer» C. Maximum demand